1 2 13 drill hole
[DOC File]Process Specification for the Installation of Key-retained ...
https://info.5y1.org/1-2-13-drill-hole_1_dd5287.html
Standard drill hole depths are found in Tables 1, 2, 3, and 4 (see Appendix A). Alternate drill hole depths may be used, as long as minimum full thread depth is maintained, but the alternate drill hole depth must be specified on the engineering drawing. The depth of the drilled hole does not include the material removed by point of the drill.
[DOC File]Wallmat-Specs - Kinetics Noise
https://info.5y1.org/1-2-13-drill-hole_1_e436a8.html
Allow for the 1/2-inch (13-mm) thickness, top and bottom (as required), of Model Wallmat during construction of partition. Drill 3/4-inch (19-mm) diameter hole through stud plate to seat neoprene element at specified anchor spacing. Drill 3/8-inch (10-mm) diameter hole through Model Wallmat in center of cutout in base and top plate.
[DOCX File]Installation guide - Welcome | Dethloff Mfg
https://info.5y1.org/1-2-13-drill-hole_1_92d08f.html
For the front brackets there is one 1/2” hole. The rear brackets have one 1/2" hole and one 3/8” hole to drill. Once all holes are drilled, install the final 1/2"-13 x 1-1/4” button head bolts with washers and the 1/2"-13 flanged locknuts and 1/2”-13 nut plates through these holes.
[DOC File]drill hole specification form - vitrovex
https://info.5y1.org/1-2-13-drill-hole_1_3d2126.html
Drill hole inner diameter has a standard accuracy of ± 0.2 mm. Accuracy can be increased to ± 0.1 mm subject to a price surcharge. The ground flat’s outer diameter has an accuracy of ± 4 mm. (Due to the production process and characteristics of glass we cannot, unfortunately, guarantee to manufacture ideally spherical shaped spheres all ...
SOIL NAIL WALL
May 25, 2017 · The drill hole shall be grouted after installation of the soil nail bar and within 2 hours of completion of drilling. The grout shall be injected at the lowest point of each drill hole through a tremie pipe, grout tube, or casing.
[DOC File]NEWS RELEASE
https://info.5y1.org/1-2-13-drill-hole_1_2ae2ae.html
Drill hole NR131542 intersected 2.6 g/t gold and 35.0 g/t silver over 28.5 metres, at a vertical depth of 235 metres, including 4.7 g/t gold and 56.5 g/t silver over 13.5 metres. Drill hole NR131512 intersected 1.3 g/t gold and 8.8 g/t silver over 42.0 metres, at a vertical depth of 208 metres, including 8.7 g/t gold and 24.3 g/t silver over 3 ...
[DOC File]Ground Rules For Printed Circuit Layout
https://info.5y1.org/1-2-13-drill-hole_1_64aa78.html
1/1 Nominal Foil thickness in Ounces per square foot for each side of board (1 for 1 oz. copper (.0014 in. nominal thickness), 2 for 2 oz., etc.) A grade of pits and dents. 1 Class of thickness tolerance +/-.0075. A Class of warp and twist. These requirements are for raw materials and do not include the plating thickness on plated thru boards.
[DOC File][INCH-POUND]
https://info.5y1.org/1-2-13-drill-hole_1_db7d18.html
5. Assorted drill bits, no larger than 1/2" diameter. 6. Lever-type or fixed drill rig (fixed drill rig required if using diamond-tipped core drills) 7. Borescope; must fit within the hole drilled and must be appropriate for the approach to opening the lock. 8. Ice pick or similar sharp probe. 9. …
[DOC File]BSP - Drilled Shaft Foundation
https://info.5y1.org/1-2-13-drill-hole_1_151e40.html
C.2.13 Acceptance for Constructed Drilled Foundation Shafts. C.2.13.1 General. The engineer will reject any drilled foundation shafts that are not constructed and installed conforming to this special provision. Rejected shafts shall be replaced or rectified by the contractor and subject to the acceptance of …
Construction Specification 14—Pressure Grouting
1. Scope. The work consists of drilling grout holes, exploratory holes, and check holes; pressure testing, pressure washing, and injecting suspension grout under pressure; and includes furnishing of all materials, labor, and equipment as described and specified. 2. Material. Portland Cement—
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.