1 8 aluminum weight per square foot
[DOC File]GUIDE SPECIFICATIONS - SECTION 08520
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_2eacaa.html
SECTION 08 56 70 (08560) - ALUMINUM WINDOWS. PART 1 GENERAL. 1.01 SUMMARY. A. Section Includes: 1. Fixed Aluminum Blast Resistant Window Units ... is actual design pressure in pounds force per square foot used to determine structural test pressure and water test pressure. ... 1/8” standard or laminated as required to meet ASTM F1642 for Blast ...
[DOC File]SECTION 323113 - CHAIN-LINK FENCES AND GATES
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_f32008.html
Type I, pipe, 1.66 inches O.D., 2.27 pounds per linear foot. Roll formed section, 1.625 inches by 1.25 inches, 1.35 pounds per linear foot. Rail lengths shall be not less than 18 feet. Rail couplings shall be pressed steel or malleable iron sleeves, 7 inches long with .07 inch, minimum, wall thickness. Truss rod, 3/8 inch diameter, with ...
[DOCX File]Ornamental Steel Fences and Gates - Aluminum Fence
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_2c3a4c.html
A.Steel fence panels and posts shall be hot-dip galvanized to 1.25 ounces per square foot minimum zinc coating in accordance with ASTM A123. Standard size components shall receive polyester powder coating. Large gate panels shall be coated with 2-part polyurethane coating.
[DOC File]api 2218
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_be69e1.html
Answer 1: For burning pools, a Bureau of Mines study cited in the NFPA Fire Protection Handbook 17th edition, page 3-51 concludes that a fire from a flowing spill will reach an equilibrium area of about 8 square feet per gpm for liquid petroleum burning at the rate of 1 foot per hour.
[DOCX File]SECTION 07 40 00 - ROOFING AND SIDING PANELS
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_9e0c00.html
Air Infiltration: Air leakage of not more than 0.3 liter/second per square meter (0.06 cfm/square foot) when tested according to ASTM E1680 or ASTM E283 at the following test-pressure difference: Test-Pressure Difference: // 75 Pa (1.57 pound force/square foot) // // 300 Pa (6.24 pound force/square foot) //.
[DOC File]SECTION - RTC Transit
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_4241fa.html
The coating weight shall be 1.2 ounces of zinc per square foot or Type II aluminum coated unless otherwise specified by the Engineer. The wire used in the manufacture of the fabric shall be 11 gauge for all fence 72 inches or less in height.
CONNECTICUT - NIST
paper towels and tissues per 50 or 100 units or per 1 count. or per 1 or 50 or 100 square. feet/foot per 1 count Aluminum wraps, plastic wraps. and waxed paper per 1 or 50 or 100 square feet/foot Paper and plastic bags, plates. and cups per 1 or 50 or 100 units or per 1
[DOC File]STANDARDS PUBLICATION NO
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_5b0ea8.html
5.1.6 Length ( 1/8 inch. 5.1.7 End Cuts ( 2 degrees from square. 5.2 CHANNEL, ALUMINUM (EXTRUDED) 5.2.1 Wall Thickness. Thickness, Inches Tolerance (, Inches 0.124 and less 0.006 Over 0.124 through 0.249 0.007 5.2.2 Outside Dimensions. Nominal Outside Dimensions. Inches Tolerance at Corners (, Inches Solid Sides
[DOCX File]CLOSED CIRCUIT COOLERS - EVAPCO Home Page | EVAPCO
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_9474b9.html
Weight and load distribution. ... Unit shall meet or exceed energy efficiency per ASHRAE 90.1 . ... All galvanized steel shall be coated with a minimum of 2.35 ounces of zinc per square foot of area (G-235 Hot-Dip Galvanized Steel designation). During fabrication, all galvanized steel panel edges shall be coated with a 95% pure zinc-rich ...
[DOC File]INDUSTRIAL STRENGTH ALUMINUM ORNAMENTAL FENCE
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_d8f812.html
A. Structural Components: All posts and rails used in the fence system shall be manufactured from coil steel having a minimum yield strength of 55,000 psi. The steel shall be galvanized to meet the requirements of ASTM A525 with a zinc coating weight of 0.60-1.0 ounces per square foot.
[DOC File]AC 150/5370-10E, STANDARDS FOR SPECIFYING CONSTRUCTION OF ...
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_0398c2.html
Item P 620 5.1-1 Runway and Taxiway Painting [per square foot (square meter)] [lump sum] The Engineer should include a pay item for each paint and bead type material specified. Item P 620 5.1-2 Reflective Media [per pound (kilogram)] [lump sum]
[DOCX File]EVAPCO Home Page | EVAPCO
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_f13cd1.html
Weight and load distribution. ... Unit shall meet or exceed energy efficiency per ASHRAE 90.1 . ... All galvanized steel shall be coated with a minimum of 2.35 ounces of zinc per square foot of area (G-235 Hot-Dip Galvanized Steel designation). During fabrication, all galvanized steel panel edges shall be coated with a 95% pure zinc-rich ...
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and more
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_ad28ab.html
Door Thickness: 1-3/8 inches to 1-3/4 inches. Door Height: 8 feet. Load Rating: Up to 100 lbs. Track: Aluminum box track. Pocket Door Frame Assembly Kit for 3 foot Opening, 2 x 4 Framing, Door Height 6 foot 8 inches to 8 feet, 150 lbs. capacity with aluminum box track and 4-wheel carriers. KV model PKF-150A-3.
[DOCX File]SECTION 09 51 00 - ACOUSTICAL CEILINGS
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_d8ce2f.html
Weight, 4.9 kg/sq. m (one pound per square foot). Type XXB Units - Combination mineral base and glass fiber with fabric finish. Back Half of Panel: Perforated water felted mineral fiber.
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/1-8-aluminum-weight-per-square-foot_1_1b16df.html
4. Push bar: 6063 T5 aluminum alloy, 5/8 inch wide x 3/32 inch thick or ½ inch wide x 1/8 inch thick. 5. Operator lever arm and connecting bar: Heavy duty type, 6061 T6 aluminum alloy other hard tempered aluminum alloy with minimum thickness of 1/8 inch or having lateral bending resistance equal or greater than that for specified units.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.