1 or 2 711 711 1 0 0 0 1 168 1 1 default username and password

    • [PDF File]AVM-1 IP Video Attendant Station Configuration / Operation ...

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_62064b.html

      The AVM-1 IP Video Attendant Station is pre-configured with the following login credentials: IP Address: 192.168.1.200 Username: admin Password: admin 2. Configure the IP address of your PC to be on the same subnet as the AVM-1. For example, 192.168.1.3 3. Open a supported Web browser and direct it to the IP address of the AVM-1.

    • [PDF File]LILIN M Series Camera User Manual Table of Contents

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_747dce.html

      Supports G.711 Supports ONVIF protocol Supports LILIN Navigator ... longer be able to access this network device and will need to perform a hardware reset to restore the default username and password. Chapter 1 System Overview ... address for each IP camera is 192.168.0.200. Users can use the default IP address to verify the camera’s

    • [PDF File]SIP Trunking using the Optimum Business SIP Trunk Adaptor ...

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_fa9cd2.html

      Asterisk IP-PBX 13.2 1 5 @192.168.1.1. The extension/DID that is attached to the end of the string is to indicate what user uri to use, by default it will be “s” if this is not defined.

    • [PDF File]ZYCOO SIP Paging Gateway User Guide.docx 20201022

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_8026c3.html

      • Audio Codecs: G.711(a, u), G.722, G.729 ... you’ll have to use the failover IP address 192.168.1.101 to access the web ... Default username: admin Default password: admin For the safety of the SIP paging gateway, it is recommended to change the default password on first login,

    • [PDF File]SIP Trunking using the Optimum Business SIP Trunk Adaptor ...

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_8f72d3.html

      @192.168.1.1. The ext ension/DID that is attached to the end of the string is to indicate what user uri to use, by default it will be “s” if this is not defined. This string will cause a register attempt to the Optimum Business SIP Trunk Adaptor with the Authentication Username of 4085555555 and password of p@ssw0rd to

    • [PDF File]M38 IP Camera Module User’s Guide

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_04406d.html

      1.2 Key features ... Standard G.711 audio compression format Support 1080P, 720P, D1 resolution Built-in Web Server, fully support monitor, configure and manage via IE ... Note: The default IP address is static IP 192.168.0.168. You can change the static IP address or set network setting to DHCP in Web Interface.

    • Grandstream Networks, Inc.

      Version 1.0.1.6 WARNING Please do not use a different power adaptor with devices as it may cause damage to the products and void the manufacturer warranty. CE Authentication Hereby, Grandstream Networks, Inc. declares that the radio equipment GVC3212 is in compliance with Directive 2014/53/EU.

    • [PDF File]Cisco Residential Wireless Gateway with Digital ... - Melita

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_a2e6c0.html

      than conventional single-channel EuroDOCSIS ™ 2.0 cable modems. The Cisco EPC3928 (Figure 1) is designed to meet EuroPacketCable ™ 1.5 and DOCSIS ® 3.0 specifications, as well as offering backward compatibility for operation in EuroPacketCable 1.0 and DOCSIS 2.0, 1.1, and 1.0 networks. Figure 1.

    • [PDF File]ATA User's manual - PLANET

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_4c3a83.html

      • Voice codec support: G.711, G.723.1, G.729A/G.729B • T.38 FAX transmission over IP network 6 ... default: 192.168.0.1) of VIP in the address bar. After logging on machine with username/password (default: root / no password), browse to “ ...

    • [PDF File]TA410/810 User Manual

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_7a324e.html

      2.1.2 Network status . In this page, the IP address of LAN port will appear with their status. Figure 2-2 Network Status . If your VLAN or VPN are configured, you can check the status in this page also. 2.1.3 System Info . In this page, we can check the hardware/firmware version, or the disk usage of TA. Figure 2-3 System Info . 2.2 Reports

    • [PDF File]Configuring the Cisco Router and VPN Clients Using PPTP ...

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_eb262a.html

      ip unnumbered FastEthernet0/0 peer default ip address pool test no keepalive ppp encrypt mppe auto ppp authentication pap chap ms−chap!!−−− Create IP pool named test and specify IP range. ip local pool test 192.168.1.1 192.168.1.250 no ip http server no ip http secure−server ip classless ip route 0.0.0.0 0.0.0.0 172.16.142.1! ip pim ...

    • Residential Gateway User Guide

      • Echo cancellation as per ITU-T G.168 (up to 16 ms tail end) • Fax Transmission: G.711 Direct & Indirect Media, T.38 Direct & Indirect Media • Supports receiving and sending media using the G.711 Codec and G.729 Codec • Supports DTMF as specified in RFC2833 . Service & Support . This device has no user-serviceable parts.

    • [PDF File]VECODER SERIES MANUAL Pro Video instruments

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_3fb632.html

      DEFAULT IPS: 192.168.1.170 192.168.1.171 192.168.1.168 192.168.1.169 Note: The following manual uses references and examples to demonstrate the functions of the unit. Menu features and format might differ from your model; however, the core features are the same.

    • [PDF File]VOIP-600 Series Phone - Configuration and Operation Manual

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_b30d61.html

      3.2. Configuration Using the Web GUI 1. Ensure both the VOIP-600 and your PC are connected to the Local Area Network. A direct connection to the VOIP-600 will require the use of a crossover network cable. VOIP-600 Series Phones are pre-configured with the following default settings: IP Address: 192.168.1.10 Username: admin Password: admin@123 2. 4.

    • [PDF File]SRX240 Services Gateway - Juniper

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_a4d4a4.html

      0/15), which is configured with an IP address of 192.168.1.1/24. • When an SRX240 Series Services Gateway is powered on for the first time, it boots using the factory default configuration. Step 4 Access the J-Web interface: 1. Launch a Web browser from the management device. 2. Enter 192.168.1.1 in the URL address field. 3.

    • [PDF File]Manual BlueNet BN2000 - BACHMANN

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_3b8b56.html

      3.2 Users 3.2.1 Create New User 1. Under Username, enter a user name. 2. Select the user type. a. Admin: Full access rights to the whole system b. User: Access to Home and Analyzer (appropriate if Restricted option has been selected for the web server) 3. Enter a password for the user. 4. Click on "Create User". 3.2.2 Modify User 1. Select the ...

    • [PDF File]Setup Reference guide for KX-NS Series (Tested with NS700 ...

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_be6e38.html

      3.4.1.11 Propagate Refer: Leave “Teams handles transfers” (Default) 3.4.1.12 Suppress Contact Data Param: Leave “ Yes ” (Default) If you have a single-organization PBX using a single public IP address, then you should set this to ‘No’ as

    • [PDF File]Configure Prefix Delegation in VPDN Scenario

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_2ad70b.html

      username test@cisco.com password cisco interface Ethernet1/0 €ip vrf forwarding test €ip address 192.168.1.2 255.255.255.0 €negotiation auto €cdp enable end € interface Virtual-Template1 €ip address 10.1.1.1 255.255.255.0 €ipv6 enable €ipv6 dhcp server AAA €peer default ip address pool local €peer default ipv6 pool PPPOE_POOL6

    • [PDF File]ZX100 IP PBX User's Manual

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_cf3f2f.html

      Enter Username and password (default username is admin, password is admin), then click “login”. Once the login is successful, the home page will be display: Noted: you have to add a network segment same with the WAN ports if your PC is not at 192.168.1.XXX. With the zycoo GUI, you can configure extensions , conference, voicemail, Dial Plan and

    • [PDF File]VOI-7010 / VOI-7011 SIP IP Telephone

      https://info.5y1.org/1-or-2-711-711-1-0-0-0-1-168-1-1-default-username-and-password_1_aca4d0.html

      2 1.1. Features SIP v1 (RFC2543), v2 (RFC3261) with MD5 authentication (RFC2069 and RFC 2617) RJ45 x 2 for Ethernet WAN and LAN ports ITU-T G.711, G.723, G.726, G.729A/B, VAD and CNG for Speech Codec ITU-T G.165/168 Echo Cancellation LCD Display for registered IP phone number

Nearby & related entries:

To fulfill the demand for quickly locating and searching documents.

It is intelligent file search solution for home and business.

Literature Lottery

Advertisement
Hot searches

©2024 5y1.org, Inc. All rights reserved.