10 inch square tile: free download. On-line document store on 5y1.org

[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/10-inch-square-tile_1_454255.html
Basis of Design: Brava Roof Tile, Old World Slate; as manufactured by Brava Roof Tile. Lightweight, synthetic slate tiles with the appearance, texture, and thickness of traditional slate tiles. Material: Engineered polymer formulated from post-industrial recycled plastic. Installed weight: At 10 inch exposure: 339 pounds per square (16.5 kg/sq. m).

[DOC File]MASTER SPECIFICATION - Mats Inc
https://info.5y1.org/10-inch-square-tile_1_37988a.html
2. Lay tile from center marks established with principal walls, discounting minor offsets, so that tile at opposite edges of room are of equal width. Adjust as necessary to avoid use of cut widths less than 1/2 tile at room perimeters. Lay tile square to room axis, unless otherwise shown. 3. Cut tile …

[DOC File]Ceramic Tile Specification
https://info.5y1.org/10-inch-square-tile_1_3550cd.html
2. Submit a minimum of four 18-inch square samples for each type of carpet tile required. Submit samples that are large enough to show pattern repeat if beyond an 18-inch sample dimension. 3. Submit samples of each type exposed edge stripping, vinyl base, and accessory item. D. Certification: 1.

[DOCX File]SECTION 09 30 13 - CERAMIC/PORCELAIN TILING
https://info.5y1.org/10-inch-square-tile_1_6d54bc.html
Unglazed Quarry Tile: Nominal 13 mm (1/2 inch) thick, square edges. ... Not more than 3 mm in 3048 mm (1/8 inch in 10 feet) where dry-set portland cement, and latex-portland cement mortar setting beds and chemical-resistant bond coats are used. Variation in Plane of Wall Surfaces:

[DOC File]424 - Florida Building
https://info.5y1.org/10-inch-square-tile_1_9c3b70.html
(b) One-inch (25 mm) square tile may be used if the licensed contractor provides a signed written certification to the approving department engineer that the adhesive used on the one-inch (25 mm) square tile has a manufacturer's tested shear strength of at least 250 psi (1724 kPa) and the manufacturer has specified the adhesive for use ...

[DOC File]Ceramic Tile Specification
https://info.5y1.org/10-inch-square-tile_1_096bed.html
Depth: 12 inch (305 mm) depth. Nosing Design: Flexible for angles between 60 degrees and 90 degrees. Nosing Shape: As indicated on the Drawings. Nosing Shape: As selected by Architect from manufacturer's standard options. Nosing Shape: Round. Nosing Height: 1-5/8 inches (41 mm). Nosing Shape: Square. Nosing Height: 1-1/2 inches (38 mm).

[DOC File]PART 1 - GENERAL - Tile Tech Pavers®
https://info.5y1.org/10-inch-square-tile_1_838b0d.html
b. Dimensions: 4.215-inch outside diameter & 3.890-inch inside diameter. c. Meet ASTM D-3034 and F-679. d. NOT supplied with pedestal components by Tile Tech, Inc. 2. Decking Screw. a. 1-½ inch long black corrosion resistant deck screw used to secure Hex Lock Disk and 4 individual corners of trays to pedestal system. b.

[DOCX File]SECTION 09 51 00 - ACOUSTICAL CEILINGS
https://info.5y1.org/10-inch-square-tile_1_d8ce2f.html
Cross Score: 300 by 600 mm (12 by 24 inch) tile to simulate 300 by 300 mm (12 by 12 inch) tile edges. Edge and Joint Detail: // Beveled // Square // edges and …

[DOCX File]Minneapolis Public Schools
https://info.5y1.org/10-inch-square-tile_1_2a62f4.html
Description: 10-inch wide by 1/8-inch thick vinyl, site cut to conform to treads and risers. Color: As selected by Architect from manufacturer’s standard color line, in multiple colors if desired. ... Lay tile square to room axis, unless otherwise shown or directed. Match tiles for color and pattern by using tile from cartons in same sequence ...

10 inch square tile