10 step pre cut stair stringer
[DOC File]Asphalt - Gradus
https://info.5y1.org/10-step-pre-cut-stair-stringer_1_55b638.html
The Tread Plate should be pre drilled and countersunk to accommodate No 10 stainless steel screws at 250/300 mm centres, set at 30 mm from the front edge and 50mm from the back edge of the panel. First and last fixings should be positioned 150 mm from the stringer edge of the stair.
[DOC File]STAIRS
https://info.5y1.org/10-step-pre-cut-stair-stringer_1_2c032e.html
cut stringer. housed or closed stringer. rough stringer. Cut stringer: its upper surface having carriage accurately cut to receive the treads and risers. improve very much the appearance of a stair. lower edge is kept parallel to the pitch of the stair. because of cuts, it becomes weak. Housed or closed stringer:
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/10-step-pre-cut-stair-stringer_1_dd215a.html
Stair systems are designed and fabricated to support a uniform live load of 100 lb/sf (4.8 kN/sq.m) and a concentrated load of 300 lbf (1.33 kN) with a deflection of stringer or landing framing not to exceed L/240 or 1/4 inch (6 mm) whichever is less. Handrail and guardrail systems are designed and fabricated to the following specifications:
0651p KARNDEAN in resilient finishes
0651p KARNDEAN in resilient finishes. Branded worksection. This branded worksection Template has been developed by NATSPEC in conjunction with Karndean Designflooring and may be used whilst the Product Partner is licensed to distribute it. The copyright remains with NATSPEC. As with all NATSPEC worksections, it is the responsibility of the user to make sure it is completed appropriately for ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.