2 inch galvanized fence post
32 31 13 - Chain Link Fences and Gates
Galvanized Steel Finish (only acceptable when out of public view, or for agricultural use): ASTM A 392, Class 2, with not less than 2.0 oz. zinc per sq. ft. of uncoated wire surface on wire coated before weaving or not less than 2.0 oz. zinc per sq. ft. of uncoated wire surface on wire of fabric coated after weaving as determined from the average of two or more samples and not less than 1.8 oz ...
Construction Specification 91—Chain Link Fence
2. Material. The material for the chain link fence must be as follows: Galvanized. Chain link fence fabric must conform to the requirements of ASTM A392, 2-inch mesh and 9-gauge galvanized steel wire. Zinc coating must be class 2. Posts and fence framework must conform to the requirements of ASTM F1043 Group 1A, for Heavy Industrial Fence.
[DOC File]SECTION 02444
https://info.5y1.org/2-inch-galvanized-fence-post_1_461bac.html
Post Clips: Galvanized or aluminum-coated 0.192 inch steel wire, or aluminum alloy conforming to ASTM B211, 1100-H14. Aluminum coating: minimum 0.30 ounces per …
Construction Specification 91—Chain Link Fence
2. Material. The material for the chain link fence shall be as follows: Galvanized. Chain link fence fabric shall conform to the requirements of ASTM A 392, 2-inch mesh and 9-gauge galvanized steel wire. Zinc coating shall be class 2. Posts and fence framework shall conform to the requirements of ASTM F 1043 Group 1A, for Heavy Industrial Fence.
[DOCX File]Ornamental Welded Wire Fences and Gates - Steel Fence
https://info.5y1.org/2-inch-galvanized-fence-post_1_4c292b.html
F.Fence panels: Fabricated from galvanized wire welded to form open mesh. 1.Vertical wires: [3/16 inch] [5 mm] diameter spaced at [2 inches.] [51 mm.] 2.Horizontal wires: Two [1/4 inch] [6 mm] diameter wires encasing vertical wires and spaced at [8 inches.] [203 mm.]
[DOC File]SECTION 323113 - CHAIN-LINK FENCES AND GATES
https://info.5y1.org/2-inch-galvanized-fence-post_1_f32008.html
Tension Wire: 7 gauge heavy galvanized high carbon steel. Tension Bar: 3/16 inch by 3/4 inch, minimum, 2 inches less than full height of fabric. Post Tops and Extensions: Posts shall be fitted with galvanized heavy malleable iron or pressed steel tops. Bases of the post tops shall have flanges which fit around the outside of the top of the posts.
[DOC File]FENCE - USDA
https://info.5y1.org/2-inch-galvanized-fence-post_1_89af13.html
Inside Temporary or Temporary Lane Fence. Fence Description: Line 1. Post Spacing= feet. Line 2. Fence Length= rolls needed (line 2 x line 3 divided by 330) Line 3. No. of wires= Line 4. No. of double corners= Line 5. No. of single corners= Line 6. No. of single ends= Line 7. No. of double ends= Total Corner and End Posts: 6 in. posts. 4 in ...
[DOCX File]Ornamental Steel Fences and Gates - Aluminum Fence
https://info.5y1.org/2-inch-galvanized-fence-post_1_2c3a4c.html
product literature for required sizes for heights, widths, and types of fence panel. ***** D.Posts: Galvanized [round steel tubes]. 4.Size: [2-1/2 inch] [65 mm] with [1/8 inch] [3.25 mm] wall. 5.Length: [_____]. 6.Weld flat steel bar top caps to tubular posts. 2. 4. GATES. A.Provide gates of type and size indicated on Drawings.
[DOCX File]CHAIN LINK FENCES AND GATES
https://info.5y1.org/2-inch-galvanized-fence-post_1_9eb0f1.html
1-5/8” O.D. galvanized steel tubing at 1.35 lbs/lf and a 5/16-inch diameter truss rod and turnbuckle to be attached between end, pull or gate post and adjacent line post. [EDIT] Parts shall be PVC coated or zinc coating, to match fabric
SECTION 323113 - CHAIN LINK FENCES AND GATES
Line Posts: 2.375 inch (59 mm) outside diameter, Schedule 40 galvanized steel pipe or galvanized "H" columns weighing not less than 2.7 lb./ft (13.18 kg/m²). Corner and Terminal Posts: 2.875 inch (73 mm) outside diameter, Schedule 40 galvanized steel pipe.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.