220 volt plugs and receptacles
[DOC File]Ampacity
https://info.5y1.org/220-volt-plugs-and-receptacles_1_100c16.html
178. 647.7 Receptacles (Sensitive Electronic Equipment). All 125-volt receptacles used for _____-volt technical power shall have a unique configuration and be identified for use with this class of system. a. 220. b. 60/120. c. 125. d. both a & c
[DOC File]1 - HSSE WORLD
https://info.5y1.org/220-volt-plugs-and-receptacles_1_b1fa05.html
220 VOLT PORTABLE TOOLS. MAJOR PLANT UPSET. Qualified, experienced electricians must carry out all installation work. A competent person must be made directly responsible for the overall safety of the installation. Its general usage, its maintenance, and any alterations and extensions to the system shall be under his control.
[DOC File]spec2
https://info.5y1.org/220-volt-plugs-and-receptacles_1_1c824f.html
A minimum of 210 120 Volt duplex electrical outlets are required. Unless otherwise approved by the State: All rooms shall have a minimum of (3) duplex receptacles. At least one duplex receptacle must be provided at each telecommunication outlet.
[DOCX File]Minneapolis Public Schools
https://info.5y1.org/220-volt-plugs-and-receptacles_1_ea7789.html
3 Phase, 208 Volt Receptacles: Provide 3 pole, 4-wire grounding type complete with flush plate to match cords and plugs on Owner's units. Where Owner does not have existing units to match, provide No. 2420-A (NEMA L15-20R), twist lock type receptacles in flush plates.
spec2 - North Carolina
120 Volt duplex electrical outlets are required. Unless otherwise approved by the State: ... All rooms shall have a minimum of (3) duplex receptacles. At least one duplex receptacle must be provided at each telecommunication outlet. ... 220-volt outlet required for copier machine(s). Number and location shall be determined by the State.
[DOC File]ARTICLE 553 Floating Buildings
https://info.5y1.org/220-volt-plugs-and-receptacles_1_fd0f39.html
Receptacles rated not less than 30 amperes or more than 50 amperes shall be of the locking and grounding type. For various configurations and ratins of locking and grounding-type receptacles and caps, see ANSI/NEWA 18WD 6-1989, National Electrical Manufacturers Association’s Standard for Dimensions of Attachment Plugs and Receptacles.
OSHPD-03-19-IET-Pt2V2-45D
For the purposes of this requirement, “permanently attached” shall include all electrical connections except plugs for 110/220 volt receptacles having a flexible cable. [DSA-SS] Movable or mobile equipment which is heavier than 400 pounds or has a center of mass located 4 feet (1.22 m) or more above the adjacent floor or roof level that ...
[DOC File]Quantum_260943-13_CSI_Spec_8_11_08_1995format.doc
https://info.5y1.org/220-volt-plugs-and-receptacles_1_9da7d4.html
Receptacles listed to UL 498, CSA C22.2 #42-99, NOM–003–SCFI. Receptacles NEMA configuration type [15 Amp] [20 Amp]. Isolated ground NEMA configuration type receptacles [15 Amp] [20 Amp]. Half duplex receptacles require two (2) separate power feeds, one for the dimmed half of the receptacle and one for the non-dimmed half of the receptacle.
[DOCX File]GENERAL REQUIREMENTS - Salt Lake City
https://info.5y1.org/220-volt-plugs-and-receptacles_1_3af675.html
Provide and install a 125 amp, 110/220 volt, 20 circuit panel board. If the panel is installed on the exterior of the house, the installation shall include an outside receptacle. All circuits in the panel shall be labeled legibly to indicate the purpose of the circuit.
California
The State agency shall draft the regulations in plain, straightforward language, avoiding technical terms as much as possible and using a coherent and easily readable style. The a
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.