3 tab shingles
[DOC File]Thinking of Re-Roofing
https://info.5y1.org/3-tab-shingles_1_0dcf29.html
Standard 3 tab shingles are not permitted. Since weathered wood is not a manufacturer’s trade name, the following shingles are deemed acceptable for use in Lowe’s Farm. Owens CorningTM 30 Year Oakridge or Duration, Driftwood Color. Owens CorningTM Lifetime Weatherguard, Driftwood Color
[DOC File]You are setting a door for a Case customer and the ...
https://info.5y1.org/3-tab-shingles_1_2fef51.html
Fiberglass 3 tab shingles typically have an exposure on the roof of. 4 inches. 5 inches. 24 inches. 12 x 36 inches. Title: You are setting a door for a Case customer and the customer comes up and tells you the door is wrong Author: Case Design Remodeling Last modified by: Case Design/Remodeling, Inc.
[DOC File]07311 - Asphalt Shingle Roofing on Uninsulated Wood Deck
https://info.5y1.org/3-tab-shingles_1_fa7dfb.html
1:3 and steeper Triple tab. 1:6 to less than 1:3 Low slope (see alternative below) Shallower than 1:6: None. Do not use shingles. Notwithstanding that triple tab shingle manufacturers offer long term warranties on this type of product (but not leakage) applied to low roof slopes, the ARCA does not support this type of application.
[DOCX File]ARCAT, Inc.
https://info.5y1.org/3-tab-shingles_1_8dfd57.html
Starter courses: Use Malarkey starter shingles or 3-tab shingles with the tabs cut off; apply to eave and rake edges of roof. Apply the initial, full-length starter shingle on a lower corner of roof. The starter course shall overhang the edge metal 1/4 to 3/4 inch (6 mm to 19 mm).
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and more
https://info.5y1.org/3-tab-shingles_1_f12e29.html
** NOTE TO SPECIFIER ** Field fabricated hip & ridge shingles fabricated from 3-tab shingles only. For use with 3-tab shingles only. Ridge cap shingle field fabricated from the same color and type of field shingle. Each bundle covers approx. 33 lineal feet (10.15m).
[DOC File]Design Guidelines and Regulations - Flagstaff Management
https://info.5y1.org/3-tab-shingles_1_1f5a29.html
Roofing Materials. Allowable roofing materials are 3 tab asphalt shingles. Roofing materials that differ from this must be approved by the Committee prior to installation. Exterior Building Materials. Exterior building materials must be in style with the Neighborhood. Materials must be approved by the Committee prior to construction.
[DOCX File]ARCAT spec 07310mrp 07_31_13mrp 2016-9-8
https://info.5y1.org/3-tab-shingles_1_062436.html
Starter courses: Use Malarkey starter shingles or self-sealing 3-tab shingles with the. tabs cut off; apply to eave and rake edges of roof. Apply the initial, full-length starter shingle on a lower corner of roof. The starter course shall overhang the edge metal 1/4 to 3/4 inch (6 mm to 19 mm). Fasten with four (4) nails, 1-1/2 inches to 3 ...
[DOCX File]SECTION 07 31 13, ASPHALT SHINGLES
https://info.5y1.org/3-tab-shingles_1_df5ab8.html
b)Mansard construction slopes 5:3 (21 inches per foot) or steeper. PART 1 - GENERAL. 1.1 DESCRIPTION. This section specifies organic felt and fiberglass asphalt shingles. 1.2 RELATED WORK. A.Color of shingles: Section 09 06 00, SCHEDULE FOR FINISHES. B.Counterflashing and flashing of roof projections: Section 07 60 00, FLASHING AND SHEET METAL.
[DOC File]SECTION 07311 - Government of New York
https://info.5y1.org/3-tab-shingles_1_9405a9.html
Hand-tab shingles. Install 7 nails and a dollop of plastic cement under each shingle tab following the manufacturers’ guidelines for “Steep Slope Application” method for each roof area. e. Do not install shingles when ambient temperature is below 40 degrees Fahrenheit. 3. Eaves: Start shingles at eaves with a starter course.
[DOC File]SECTION 13122 - Government of New York
https://info.5y1.org/3-tab-shingles_1_c68119.html
Asphalt shingles, if used in the building design, shall be ____year warranty 3 tab Architectural asphalt shingles. Unprotected aluminum, bare steel or galvanized surfaces are not acceptable. 1. Drainage: Positive slope; no standing water. 2. Wind Uplift Resistance: Per ASTM D7158 Class-G 120-MPH Basic Wind Speed. 3.
[DOC File]It’s the Liability, Stupid
https://info.5y1.org/3-tab-shingles_1_2026e1.html
About a year ago, Tommy looked at his roof and saw granule loss, some missing shingles and had a couple of water streaks along an inside wall. He decided that he needed a new roof. He went about it with great vigor and enthusiasm, but his efforts were primarily aimed at getting just the righ color of 3 tab shingles to match the rest of his ...
[DOC File]07 31 13 (07311) - Asphalt Shingle Roofing on Uninsulated ...
https://info.5y1.org/3-tab-shingles_1_77ef11.html
1:3 and steeper Triple tab. 1:6 to less than 1:3 Low slope (see alternative below) Shallower than 1:6: None. Do not use shingles. Notwithstanding that triple tab shingle manufacturers offer long term warranties on this type of product (but not leakage) applied to low roof slopes, the ARCA does not support this type of application.
[DOC File]Division 07 - Fiberglass and Tab Shingles
https://info.5y1.org/3-tab-shingles_1_f90c5d.html
Fiberglass shingles, 3-tab, self-sealing, metric or standard size, with a U.L. Class “A” and Wind Resistant label. Acceptable Manufacturers & Products: Atlas “GlassMaster" CertainTeed “XT30" GAF “Marquis Weathermax” Drip Edge & Rake Edge Metal:
[DOC File]GUIDE SPECIFICATION - Owens Corning
https://info.5y1.org/3-tab-shingles_1_538e20.html
Perforated Hip & Ridge Shingles with Sealant (Metric) Perforated 4-tab shingles designed for fast and easy installation. Nominal size . 13 ¼” x 39 3/8”; Piece size . 13 ¼” x 9 27/32” with 5 5/8” exposure. ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.