3 x 2 steel tubing: free download. On-line document store on 5y1.org

[DOCX File]www.fullthrottlemotorspeedway.com
https://info.5y1.org/3-x-2-steel-tubing_1_c12119.html
*Cage must be constructed of 1 3/4′′minimum outside diameter by.095′′wall thickness round steel tubing. **Left leg protection bar must be installed. ** *Foot box must be constructed of a minimum 12 gauge sheet steel. *No square tubing, channel or angle iron will be allowed in …
2x3 box tubing

[DOCX File]SECTION 05 50 00, METAL FABRICATIONS
https://info.5y1.org/3-x-2-steel-tubing_1_fc6144.html
2.Where size of angle is not shown, provide 50 x 50 x 6 mm (2 x 2 x 1/4 inch) steel angle with 32 x 5 mm (1-1/4 x 3/16 inch) strap anchors, welded to back. 3.Miter or butt angles at corners and weld. 4.Use one anchor near end and three feet on centers between end anchors.
2 x 3 rectangular tubing

[DOC File]Playfield Equipment
https://info.5y1.org/3-x-2-steel-tubing_1_4545b5.html
Lower support assembly shall be fabricated from 3-½” O.D. heavy wall, galvanized pipe furnished with a heavy, slotted mounting plate which is located directly behind the four goal mounting holes. Upper support assembly shall be fabricated from 1-7/8” O.D. heavy wall, galvanized pipe fabricated with a plated, structural angle for attachment ...
2x3 steel tubing for trailers

[DOC File]No - Columbia Cascade Company
https://info.5y1.org/3-x-2-steel-tubing_1_4e6d73.html
Side slats shall be fabricated from .085 inch thick x 3/4 inch x 1-1/2 inch mild steel seamless tubing. Litter container shall include a hinged side door with keyed-cylinder lock, a matching .125 inch thick steel plate flat top with 13 inch diameter center hole and a black coated 36-gallon recycled plastic liner with two hand holds for easy ...
2x3 tube steel

[DOC File]CCI -- Pricing and ordering
https://info.5y1.org/3-x-2-steel-tubing_1_80148d.html
Post Sign Sq 2 1/2 x 2 1/2 x 3 Ft Perforated Steel Tubing Galvanized 12 gauge. Assembly Slip Base For 3 In Galvanized Post 7 Gauge SB1. Kit Slip Base Hdw 3-1/2 In 13 X 2 1/4 In Flg Bolts 6-1/2 In Flat Washer 6 Bushing 1 Ea 1/12 In Gasket 3 1/2 In-13 Flg, Slip base repair kit.
1x2 rectangular steel tubing

[DOC File]No - Columbia Cascade Company
https://info.5y1.org/3-x-2-steel-tubing_1_99e9de.html
Frame ends shall be fabricated from 3 inch x 2 inch x .120 inch thick rectangular mild steel seamless tubing. Cross supports shall be 2 inch x 2 inch x .120 inch thick square mild steel seamless tubing. Slat supports shall be 2 inch x 1-1/2 inch x 1/4 inch thick mild steel angle and 1/4 inch thick mild steel plate.
2x3 steel tube price

[DOC File]Welcome to Dangerous Laboratories!
https://info.5y1.org/3-x-2-steel-tubing_1_ecf021.html
www.dangerouslaboratories.org. Materials List. Quantity Description 2 ¼” flat rubber washers 2 ¼” stainless steel washers 4 ¼” stainless steel nuts 2 ¼” diameter X 3” long stainless steel bolts 1 foot 5/16” Stainless Steel Cable 1 3/8” diameter X 0.28” thick stainless steel tube 1 Pleated paper water filter (Culligan S-1 A or equivalent) 1 Water Filter Housing (Pentek ...
2x3 rectangular galvanized tubing

[DOCX File]SECTION 10 22 13 - WIRE MESH PARTITIONS - WBDG
https://info.5y1.org/3-x-2-steel-tubing_1_d959fd.html
E. Steel Tubing: ASTM A500/A500M, cold-formed structural-steel tubing or ASTM A513, Type 5, mandrel-drawn mechanical tubing. ... 25 x 13 x 3 mm (1 x 1/2 x 1/8 inch) channel with all wires woven through, or two (2) 25 x 10 x 3 mm (1 x 3/8 x 1/8 inch) channels bolted together with mesh in between.
2x3 rectangular steel tubing

[DOC File]SECTION 02821
https://info.5y1.org/3-x-2-steel-tubing_1_e6a251.html
3. Class B Steel Tubing: 1.90 inches OD, 2.28 lb per lin ft. B. Assemble gate frames by welding or with special steel fittings and rivets for rigid connections. Install mid-height horizontal rail on gates over 10 feet high. When width of gate leaf exceeds 10 feet, install mid-distance vertical bracing of the same size and weight as frame ...
2x3 box tubing

[DOC File]TimberForm-2 Specifications
https://info.5y1.org/3-x-2-steel-tubing_1_760d8a.html
Steel support posts shall consist of 2 1/2” x 2 1/2” x. 0.188 thick square steel tubing with permanently welded 1/4” thick steel support bracket. Support posts and brackets shall be CASPAX-7( finished in accordance with Section 3.0.
2 x 3 rectangular tubing

3 x 2 steel tubing