480 to 415 volt transformer: free download. On-line document store on 5y1.org

[DOCX File]PSG Section 16461 - Eaton
https://info.5y1.org/480-to-415-volt-transformer_1_b4dc00.html
Transformer core shall be constructed with high-grade, non-aging, silicon steel with high magnetic permeability, and low hysteresis and eddy current losses. Maximum magnetic flux densities shall be substantially below the saturation point. The transformer core volume shall allow efficient transformer operation at 10% above the nominal tap voltage. The core laminations shall be tightly clamped ...
480 volt transformer step down

Class I, Divisions 1 & 2, Groups C & D
2. Unit heaters shall have an automatic and a manual reset thermal cutouts for overtemperature protection, controlling magnetic contactor and 24 volt control circuit transformer housed in a NEMA 7, 9 cast aluminum enclosure. 3. The heat exchanger shall be liquid-to-air design, utilizing an all welded steel headers and tube construction with ...
transformer 575 to 480

[DOC File]PRODUCT SPECIFICATION FOR A 15 TO 75 KVA,
https://info.5y1.org/480-to-415-volt-transformer_1_055777.html
1. Output Rating, KVA: 15. 30, 50, 75 (100 kVA, 380 or 480 VAC input only) 2. Input Voltage: 380 or 415 VAC. 3. Output Voltage: 380y/220 or 415y/240. 4. Input Frequency Tolerance: 50 Hz ± 3 Hz. 5.3 Transformer. 1. Type: Dry, isolation double-shield (Delta Wye) 2. Impedance: 3% to 5% maximum . 3. Efficiency: 96 % @ 100% load . 4. Load Power ...
240 to 400 volt transformer

Class I, Divisions 1 & 2, Groups C & D
V 120 Volt Control Circuit, Fused Secondary and Grounded This can be provided when required for special external thermostat circuit. This option cannot be provided if option Code S or M are also specified. Nor can both K and L be specified. W Wet Location Construction Features – IP55 Unit provided with components suitable for IP55 wet locations.
220 to 380 volt transformer

480 to 415 volt transformer