5 32 of an inch: free download. On-line document store on 5y1.org

[DOCX File]Section 23 31 00 - HVAC DUCTS AND CASINGS
https://info.5y1.org/5-32-of-an-inch_1_338169.html
Perforations shall not exceed 4 mm (5/32 inch) diameter, approximately 25 percent free area. Sound absorbent material shall be long glass fiber acoustic blanket meeting requirements of NFPA 90A. Entire unit shall be completely air tight and free of vibration and buckling at internal static pressures up to 2000 Pa (8 inch WG) at operating ...
5 32 equals inches

[DOC File]www.ametco.com
https://info.5y1.org/5-32-of-an-inch_1_dabe8e.html
Cross rods: [5/32 inch] [4 mm] diameter rods welded perpendicular to back side of louver bars and spaced at [5-7/32 inches] [133 mm.] 3. Perimeter side support bars: [2 by 1/4 inch] [51 by 6 mm] flat bars.
5 32 inch on ruler

[DOC File]Fire Safety Fire Extinguisher Cabinet IOM
https://info.5y1.org/5-32-of-an-inch_1_981e59.html
Drill 5/32 inch diameter holes at least every 12 inches on each side of the cabinet through the tub wall and continue drilling through the studs. Secure cabinet into the wall studs by installing #12 by 2 inch self-drilling mounting screws. Fire Rated Extinguisher Cabinets.
what is 0.8 of an inch

[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/5-32-of-an-inch_1_3d0c0d.html
Face: 5/8 inch (16 mm) wide by 13/32 inch (10.3 mm) deep, single slotted. Material: ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs. Material and Finish: Galvanized Steel. As scheduled and indicated on Drawings. ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs. Available in 24, 36, 48, and 72 inch lengths.
7 16th of an inch

[DOC File]A
https://info.5y1.org/5-32-of-an-inch_1_ac54bd.html
Test Orifice Size: Nominal [2.8K (3/8 inch), 4.2K (7/16 inch), 5.6K (1/2 inch), 8.0K (17/32) inch, 11.2K (5/8 inch, ELO), 14.0K (3/4 inch, ESFR), K25.2], as required by NFPA 13, latest edition. Pressure Relief Valve and Drainage Piping: AGF model 7000. Pressure Rating: Factory rated at 175 PSI. Other pressure settings available: [165 PSI] [185 ...
3 32 inch on ruler

[DOC File]GPM/GPH Flow based on PVC Pipe Size
https://info.5y1.org/5-32-of-an-inch_1_9f7d37.html
Pressure Flow in GPM through pipe ID in inches PSI 1" 1.25" 1.5" 2" 2.5" 3" 4" 5" 20 26 47 76 161 290 468 997 2895 30 32 58 94 200 360 582 1240 3603 40 38 68 110 234 421 680 1449 4209 50 43 77 124 264 475 767 1635 4748 60 47 85 137 291 524 846 1804 5239 75 53 95 153 329 591 955 2035 5910 100 62 112 180 384 690 1115 2377 6904 125 70 126 203 433 ...
0.6 inches on a ruler

[DOC File]Section 23 31 00 - HVAC DUCTS AND CASINGS
https://info.5y1.org/5-32-of-an-inch_1_6a5c12.html
Perforations shall not exceed 4 mm (5/32 inch) diameter, approximately 25 percent free area. Sound absorbent material shall be long glass fiber acoustic blanket meeting requirements of NFPA 90A. B. Entire unit shall be completely air tight and free of vibration and buckling at internal static pressures up to 2000 Pa (8 inches W.G.) at operating ...
5 32 convert to mm

[DOC File]A
https://info.5y1.org/5-32-of-an-inch_1_2ba505.html
Test Orifice Size: Nominal [3/8 inch (2.8K)][7/16 inch (4.2K)][1/2 inch (5.6)][17/32 inch (8.0)][5/8 inch (11.2K, ELO)][3/4 inch (14.0K, ESFR)][K25], as required by NFPA 13, latest edition. Pressure Relief Valve and Drainage Piping: AGF Model 7000. Pressure Rating: Factory rated at 175 PSI.
5 32 inch measurement

[DOCX File]Ornamental Steel Fences and Gates - Steel Gates
https://info.5y1.org/5-32-of-an-inch_1_2c3a4c.html
2.Cross rods: [5/32 inch] [4 mm] diameter rods welded perpendicular to back side of louver bars and spaced at [5-7/32 inches] [133 mm.] 3.Perimeter side support bars: [2 by 1/4 inch] [51 by 6 mm] flat bars.
5 32 equals inches

[DOC File]SECTION 083113 - ACCESS DOORS AND FRAMES
https://info.5y1.org/5-32-of-an-inch_1_1d9315.html
Latch: Option, mortise cam latch preparation to accept cylinders 1 5/32 inch (29 mm) in diameter (cylinder optional). Cylinders and cores specified in Section 087100 "Door Hardware". Latch: Option, mortise deadbolt lock preparation to accept a mortised cylinder 1 5/32 inches (29 mm) in diameter (cylinder optional).
5 32 inch on ruler

5 32 of an inch