6 in galvanized steel pipe
[DOC File]Section 221000 - Plumbing Piping Accessories
https://info.5y1.org/6-in-galvanized-steel-pipe_1_35baca.html
Material: [Copper] [Copper plated 10 gauge steel] [Steel] [10 gauge bright steel]. Pipe Hooks Sizes: [1/2 x 6 in (13 x 152 mm)] [and] [3/4 x 6 in (19 x 152 mm)] [and] [1 x 6 in (25 x 152 mm)]. Specifier’s note: for light duty support standoff of pipe or copper tubing from a wall or object.
[DOC File]SECTION 211100 - FIRE SUPPRESSION PIPING
https://info.5y1.org/6-in-galvanized-steel-pipe_1_cdcc1d.html
Fire protection system, except fire protection fittings shall be 175-pound cast iron. All dry pipe sprinkler systems shall be hot dip galvanized. Miscellaneous drains and overflows. GALVANIZED STEEL PIPE. Pipe: Schedule 40 in accordance with ASTM A120. Fittings: 150-pound screwed galvanized malleable iron on 2 inches and below.
[DOC File]CSI Format Chain Link Fence Specification
https://info.5y1.org/6-in-galvanized-steel-pipe_1_dcd46e.html
B. Round steel pipe and rail: Cold-rolled electric-resistance welded pipe in accordance with ASTM F1043 Materials Design Group IC (LG-40), minimum steel yield strength 50,000 psi (344 MPa). Type B external coating, hot dip galvanized zinc 0.9 oz/ ft² (305 g/m²) with a clear polymeric overcoat, Type D interior 90% zinc-rich coating having a ...
[DOC File]SECTION 220529 - HANGERS AND SUPPORTS FOR …
https://info.5y1.org/6-in-galvanized-steel-pipe_1_f920dc.html
Floor Support for Hot Pipe Sizes 6 Inches (152.4 mm) and Over: Adjustable cast iron roll and stand, steel screws, and concrete pier or steel support. Shied for Insulated Piping 2 Inches and Smaller: 18-gauge (1.31 mm) galvanized steel shield over insulation in 180 degree segments, at least 12 inches (300 mm) long at pipe support.
[DOC File]SECTION 05500 - Government of New York
https://info.5y1.org/6-in-galvanized-steel-pipe_1_2955d5.html
Jun 01, 1989 · 5. Post Sleeves: Galvanized steel pipe not less than 6 inches long, and having an inside diameter not less than 1/2 inch greater than the outside diameter of the pipe post. Sleeve shall have a plate closure, sized to extend not less than 1 inch beyond the outside diameter of the sleeve, secured to the bottom of the sleeve. a.
[DOCX File]Section 23 22 13 - STEAM AND CONDENSATE HEATING PIPING
https://info.5y1.org/6-in-galvanized-steel-pipe_1_e211ff.html
Housing construction: 16-gauge, G-90 galvanized steel panels fabricated into self-framing, double standing seam-type construction. All joints shall be caulked weather tight with a silicone sealant. All interior surfaces shall be insulated with 25 mm (1 inch), 10.8 kg per square meter (2.2 pounds per square foot) rigid, noncombustible glass ...
[DOC File]SECTION 232000 - HVAC PIPING
https://info.5y1.org/6-in-galvanized-steel-pipe_1_d034d5.html
GALVANIZED STEEL PIPE. Pipe: Schedule 40 in accordance with ASTM A120. Fittings: 150-pound screwed galvanized malleable iron on 2 inches and below. Mechanical couplings as herein specified on 2 1/2 inches and above. Service: Miscellaneous indirect waste piping. BLACK STEEL PIPE, SCHEDULE 80. Pipe: Schedule 80, in accordance with ASTM A120 or A53.
[DOC File]SECTION 221116 - DOMESTIC WATER PIPING
https://info.5y1.org/6-in-galvanized-steel-pipe_1_c54d91.html
Nipples in "Galvanized-Steel Pipe Nipples" Paragraph below are available in NPS 1/8 to NPS 12 (DN 6 to DN 300). Galvanized-Steel Pipe Nipples: ASTM A733, made of ASTM A53/A53M or ASTM A106/A106M, Standard Weight, seamless steel pipe with threaded ends.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.