600 volt 3 phase disconnect: free download. On-line document store on 5y1.org

Section [26 24 19.30] [16482] - Schneider Electric
The MCC shall be 600 volt, 3-phase, 3-wire, 60 hertz unless otherwise indicated (480 volt in USA). 1.2 REFERENCES A. General: The publications listed below form a part of this Specification to the extent referenced. The publications are referred to in the text by the basic designation only. The edition/revision of the referenced publications shall be the latest date as of the date of the ...
200 amp 600 volt disconnect

[DOC File]Service Entrance TVSS Protection
https://info.5y1.org/600-volt-3-phase-disconnect_1_36a88d.html
Rated for a 347/600 volt, 60 Hertz, 3-phase, 4-wire switchboard, amperage as indicated. Provide surge suppressors in accordance with the following requirements: Unit parallel in design and connected in parallel to main switchboard. Each surge suppression element (MOV) individually fused so that a failure of one element and/or fuse has no affect other surge suppression elements. Provide UL 1449 ...
600 amp 3 phase disconnect

[DOC File]EMCS: Variable Frequency Drives (to 600 Volts)
https://info.5y1.org/600-volt-3-phase-disconnect_1_fbe2a1.html
CP-3. Variable Frequency Drives Section 17001. Project No. 069803 (To 690 Volts) Page of 7. NL Master Specification Guide. for Public Funded Buildings. Section 25 30 03 – EMCS: Variable Frequency . Re-Issued 2016/01/25. Drives (to 600 Volts) Page 1 of 8. Ver. 05/21
30 amp 600 volt disconnect

SECTION 262816.11 - SAFETY DISCONNECT SWITCHES
The insulation resistance of each circuit phase-to-phase and phase-to-ground shall be measured. For circuits rated less than 600 volts, the resistance shall not be less than 100 megohms. Systems rated above 240 volts shall be tested with a 1000-volt Megohmeter. Circuits rated 240 volts and below shall be tested with a 500-volt Megohmeter. The D ...
60 amp 480 volt disconnect

[DOC File]PSG Section 26 28 16.13 - Eaton
https://info.5y1.org/600-volt-3-phase-disconnect_1_b52be5.html
250 volts ac, dc; 600 volts ac (30 A to 200 A 600 volts dc) 2, 3, 4 and 6 poles (2, 3 and 4 poles on 800 A; 2 and 3 poles on 1200 A) Fusible and non-fusible. Mechanical lugs suitable for aluminum or copper conductors. Construction. Switch blades and jaws shall be visible and plated copper. Switches shall have a red handle that is easily pad-lockable with three 3/8-inch shank locks in the OFF ...
60 amp 600 volt disconnect

600 volt 3 phase disconnect