8 inch wide shelving unit: free download. On-line document store on 5y1.org

[DOC File]SECTION 10671 - Spacesaver Intermountain
https://info.5y1.org/8-inch-wide-shelving-unit_1_4edea3.html
Setting fixed shelving directly on floors is not permitted. When required, provide bolted carriage splices designed to maintain proper unit alignment and weight load distribution. Design carriages to allow the shelving uprights to recess and interlock into the carriages a minimum of 3/4 inch (19MM). Top mount carriages are unacceptable.
8 inch wide wire shelving

[DOC File]SECTION 10672
https://info.5y1.org/8-inch-wide-shelving-unit_1_0018b5.html
Minimum Contact Surface: 5/8 inch (16MM) wide. ... Maximum 1/8 inch (3MM). Shelving Units Installation: General: Follow layout and details shown on approved shop drawings and manufacturer's printed installation instructions. Position units’ level, plumb; at proper location relative to adjoining units and related work. ... Verify shelving unit ...
8 in wide shelves

[DOC File]SECTION 10672
https://info.5y1.org/8-inch-wide-shelving-unit_1_cc62ed.html
Minimum Contact Surface: 5/8 inch (16MM) wide. ... Maximum 1/8 inch (3MM). Shelving Units Installation: General: Follow layout and details shown on approved shop drawings and manufacturer's printed installation instructions. Position units level, plumb; at proper location relative to adjoining units and related work. ... Verify shelving unit ...
wire shelving 8 inch

[DOCX File]SECTION 12 31 00 - MANUFACTURED METAL CASEWORK
https://info.5y1.org/8-inch-wide-shelving-unit_1_920cc1.html
Form sides to make rabbeted stile, 19 to 28 mm (3/4 to 1-1/8 inch) wide, closed by channel containing shelf adjustment slots. Make bottom of walls units flush, double panel construction. Make top and cross rails of "U" shaped channel.
8 in deep shelving unit

[DOCX File]SECTION 12 32 00 - MANUFACTURED WOOD CASEWORK
https://info.5y1.org/8-inch-wide-shelving-unit_1_0bcb27.html
Bright zincplated steel for recessed mounting with screws, 16 mm (5/8 inch) wide by 5 mm (3/16 inch) high providing 13 mm (1/2 inch) adjustment, complete with shelf supports. Gate Bolt: Surface mounted barrel type with strike.
12 inch wide shelving unit

[DOC File]SECTION 10673 - Patterson Pope
https://info.5y1.org/8-inch-wide-shelving-unit_1_3532d8.html
Setting fixed shelving directly on floors is not permitted. When required, provide bolted carriage splices designed to maintain proper unit alignment and weight load distribution. Design carriages to allow the shelving uprights to recess and interlock into the carriages a minimum of 3/4 inch (19MM). Top mount carriages are unacceptable.
24 wide storage shelves

[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/8-inch-wide-shelving-unit_1_43adb5.html
Single unit (starter) and/or row end uprights on a range of shelving shall consist of two 1 inch (25 mm) wide 18 gauge cold rolled steel posts roll-formed into a tubular “L” formation. Keyhole slots shall be punched on the inner wall only located on 1-1/2 inch (38 mm) centers. There shall be no holes in the outside face surface of the posts.
32 inch shelving units

Bookcases at Wayfair® | Wayfair® Bookcases | wayfair.com
Great Prices and Selection of Bookcases. Up To 70% Off! Add Storage And Style With Bookcases for Every Budget!
8 inch deep shelving unit

Shelving Units - WebstaurantStore®
Serve Your Customers By Starting With The Best Equipment From WebstaurantStore.
8 inch wide wire shelving

[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/8-inch-wide-shelving-unit_1_9915b9.html
Single unit (starter) and/or row end uprights on a range of shelving shall consist of two 1 inch (25 mm) wide 18 gauge cold rolled steel posts roll-formed into a tubular “L” formation. Keyhole slots shall be punched on the inner wall only located on 1-1/2 inch (38 mm) centers. There shall be no holes in the outside face surface of the posts.
8 in wide shelves

[DOC File]Home | TMI Systems Corporation
https://info.5y1.org/8-inch-wide-shelving-unit_1_980805.html
Core Thickness: 3/4 inch up to 30 inches wide, 1 inch over 30 inches wide. Edge: 1mm PVC on Front Edge Only. Interior finish, units with open Interiors: Top, bottom, back, sides, horizontal and vertical members, and adjustable shelving faces with TFM Thermally Fused Melamine laminate. Interior finish, units with closed Interiors:
wire shelving 8 inch

[DOC File]SECTION 10673 - Southwest Solutions
https://info.5y1.org/8-inch-wide-shelving-unit_1_28b799.html
Minimum Contact Surface: 5/8 inch (16MM) wide. ... Verify shelving unit alignment and plumb after installation. Correct if required following manufacturer’s instructions. Remove components which are chipped, scratched, or otherwise damaged and which do not match adjoining work. Replace with new, undamaged, matching units.
8 in deep shelving unit

8 inch wide shelving unit