Aluminum and stainless inc
[DOC File]Greenheck Fan - Ventex
https://info.5y1.org/aluminum-and-stainless-inc_1_785829.html
Axles: Minimum 3/8” square aluminum. Stainless steel axles are optional. 7. Bearings: Axle bearings shall be maintenance-free, 2-piece construction, Celcon inner bearing rotating within a polycarbonate outer sleeve inserted into extruded holes in the damper frame. ***** Specifier Notes: Extruded bearing holes in frame provide more axle to bearing surface area. As a result, bearings will last ...
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/aluminum-and-stainless-inc_1_036309.html
Where the stainless steel components are to be mechanically joined, use only Type 316 stainless steel fasteners. 3. DRAWING NOTES: 3.1 General: Show security screen details on the drawings. If necessary, contact the local manufacturer's representative for product data and details. 3.1.1 Add Security Screen Mesh detail, A/TG 08580 to the project drawings: 3.1.2 On individual building retrofit ...
[DOCX File]SECTION 08 90 00 - LOUVERS AND VENTS
https://info.5y1.org/aluminum-and-stainless-inc_1_3fe646.html
Fabricate from 2 mm (0.078-inch) thick stainless steel or aluminum. Provide continuous closure angles and closure plates on inside head, jambs and sill of exterior wall louvers. Secure angles and plates to louver frames with screws, and to masonry or concrete with fasteners as indicated in construction documents. WIRE GUARDS: Provide wire guards on outside of all exterior louvers, except on ...
[DOCX File]Section 05536 - PREFABRICATED MODULAR ALUMINUM STAIRS …
https://info.5y1.org/aluminum-and-stainless-inc_1_0e0535.html
2021-04-05 · Step Tread: 24 x 6 x 1-5/8 inch (610 x 152 x 41 mm), 6005-T5 aluminum. Mounts to Stair Stringer with four 3/8 inch (9.5 mm) stainless steel T-Bolts. Step tread features multiple pre-drilled holes to provide drainage and grip performance.
[DOCX File]104413 – Fire Extinguisher Cabinets
https://info.5y1.org/aluminum-and-stainless-inc_1_38dff7.html
Aluminum: Alloy and temper recommended by aluminum producer and manufacturer for type of use and finish indicated, and as follows: Sheet: ASTM B 209 (ASTM B 209M). Extruded Shapes: ASTM B 221 (ASTM B 221M). Stainless-Steel Sheet: ASTM A 666, Type 304. Delete remaining paragraphs if only security fire protection cabinets are required. Retain first paragraph below for brassy-yellow color. …
STAINLESS STEEL 'ELITE' HEADRAIL BRACED - Hadrian Inc
Hadrian Manufacturing Inc. 2.02. MATERIALS. Construction: Doors, Panels and Pilasters shall be constructed of two sheets of panel flatness Type . 304, #4 brushed finish stainless steel, laminated under pressure to a "verticel" (1/2") honeycomb core for impact resistance, rigidity and sound deadening. Formed edges to be welded together and interlocked, under tension, with a roll-formed oval ...
SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS
Aluminum, General: Provide alloy and temper recommended by aluminum producer and finisher for type of use and finish indicated, and with not less than the strength and durability properties of alloy and temper designated below for each aluminum form required. Extruded Bars and Tubing: ASTM B 221, Alloy 6063-T5/T52, 6005-T5. Extruded Structural Pipe and Round Tubing: ASTM B 429, Alloy 6061-T6 ...
[DOC File]08 44 13 - Glazed Aluminum Curtain Wall (ThermaWall 2600)
https://info.5y1.org/aluminum-and-stainless-inc_1_4afdf3.html
.1 Extruded aluminum: To ASTM B221, 6063 alloy with [T5] [T6] temper..2 Sheet aluminum: To [ASTM B209], utility grade for unexposed surfaces, anodizing quality for exposed surfaces..3 Fasteners, screws and bolts: Cadmium plated stainless steel [300] [or] [400] series to meet curtain wall requirements and as recommended by manufacturer.
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/aluminum-and-stainless-inc_1_1b16df.html
Aluminum Slats: Nominal 4 inches wide, by maximum 4'-0" long, extruded with interlocking grooves and stiffening ribs to provide 3/4 inch equivalent thickness and shaped to permit fastening to clips with two (2) aluminum or stainless-steel sheetmetal screws at each end of the slat if being installed into an aluminum slip system. If internal stiffening ribs are not within the slat design ...
[DOC File]APPENDIX X – ALUMINUM STORAGE TANKS
https://info.5y1.org/aluminum-and-stainless-inc_1_82f647.html
Similar to Appendix S for stainless tanks, the Appendix for aluminum tanks includes only those provisions that differ from steel tank requirements. This ballot addresses affirmative comments received in the third ballot. There were no negatives. Ballot to Add an Aluminum Tank Appendix to API 650. 1) Change the title of API 650: Welded Steel Tanks for Oil Storage. 2) Change Foreword: “This ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.