Aluminum flat strips
[DOCX File]Manufactured Copings - Home | Metal-Era
https://info.5y1.org/aluminum-flat-strips_1_e3d732.html
Metal-Era, Inc.May 2018. 1600 Airport Road. Waukesha, Wisconsin 53188. Phone800-558-2162. Fax800-373-9156. Websitewww.metalera.com. Emailinfo@metalera.com. Guide Specification. Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat, SectionFormat, …
[DOCX File]SECTION 12 35 70.21 - MEDICATION CABINET
https://info.5y1.org/aluminum-flat-strips_1_481243.html
Flat Closure Strips: 1.1 mm (43 mils) thick steel. closure strips, scribed to required contours. Machined Closure Strips: 0.75 mm (30 mils) thick steel, formed with returns for fastening with sheet metal screws to tubular or channel members of cabinets or with bolts where exposed on inside.
[DOC File]Section 07457 - CEMENTITIOUS PANELS
https://info.5y1.org/aluminum-flat-strips_1_066e4f.html
Trims: Reveal™ Trims manufactured by Custom Aluminum of Elgin, IL in the following profiles supplied by James Hardie. Aluminum alloy 6063-T5 with a minimum thickness of 0.050 inch. All reveal trims are 8 feet in length. Surround horizontal trim. Surround vertical trim. Surround horizontal end cut transition trim. Surround outside corner trim.
[DOC File]095433 DECORATIVE PANEL CEILINGS
https://info.5y1.org/aluminum-flat-strips_1_825f40.html
Pattern: Woven strips 1.5 inches wide and 1.5 inches on center. Woven Wood: Veneer-wrapped bent wood strips with flat faces, 1.5 inches wide, nominal 1.5 inches on center, 0.5 inches thick overall. Monolithic tiles or panels are not acceptable. Align veneer grain with long edge of woven strips.
[DOCX File]SECTION 07 60 00, FLASHING AND SHEET METAL
https://info.5y1.org/aluminum-flat-strips_1_b285b8.html
a.Flat-lock joints shall finish not less than 19 mm (3/4 inch) wide. ... 1.Fabricate continuous edge strips where shown and specified to secure loose edges of the sheet metal work. 2.Except as otherwise specified, fabricate edge strips or minimum //0.6 Kg (24 ounce)copper// //0.6 mm (0.024 inch) thick stainless steel// //1.25 mm (0.050 inch ...
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/aluminum-flat-strips_1_fea692.html
4. Push bar: 6063 T5 aluminum alloy, 5/8 inch wide x 3/32 inch thick or ½ inch wide x 1/8 inch thick. 5. Operator lever arm and connecting bar: Heavy duty type, 6061 T6 aluminum alloy other hard tempered aluminum alloy with minimum thickness of 1/8 inch or having lateral bending resistance equal or greater than that for specified units.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.