Amtrol expansion tank sizing guide

    • SECTION 232116 - HYDRONIC PIPING SPECIALTIES

      This guide specification is intended to provide the Design Professional with a basic guidel. ine of minimum OPP requirements. The guide specification shall be carefully reviewed and edited with respect to application-specific project requirements. Proposed modifications shall be reviewed with OPP Staff.


    • [DOCX File]This section has been written to cover most (but not all ...

      https://info.5y1.org/amtrol-expansion-tank-sizing-guide_1_c5d9d3.html

      Vertical steel precharged hydro-pneumatic expansion tank, 125 psi ASME labeled construction, complete with replaceable flexible butyl rubber bladder, system connection fitting, Schrader type air charge fitting, steel base ring stand, factory prime and enamel painted exterior finish, ASME relief valve.


    • [DOC File]TICEL BIO PARK II

      https://info.5y1.org/amtrol-expansion-tank-sizing-guide_1_395f42.html

      The cable sizing shall be done based on the manufacturer's data. Each individual motor feeder shall have a continuous capacity of at least 125% of the motor full load current. The minimum capacity of a cable supplying a group of motors should be at least equal to the sum of the full load current ratings of all the motors plus 25% of the full ...



    • [DOC File]END OF SECTION - University of Houston

      https://info.5y1.org/amtrol-expansion-tank-sizing-guide_1_2bb7a3.html

      The outside of each tank shall be factory-painted with a primer and two coats of enamel after fabrication. Each tank shall bear an appropriate ASME label for the system working pressures and temperatures. Manufacturers: Tanks manufactured by Amtrol, Armstrong, Taco, or Woods Industrial and meeting the above specifications will be acceptable.


    • [DOC File]Section 15010 Mechanical Provisions

      https://info.5y1.org/amtrol-expansion-tank-sizing-guide_1_817fc4.html

      A. Carbon steel tank with heavy-duty butyl diaphragm, ASME rated for 240 deg F at 125 psig, gallon capacity as required. B Mfg: Bell and Gossett, Amtrol, Taco, Teel or equal. (7) Heat Trace: Raychem Wintergard Wet with metal braid and waterproof outer jacket, 120V, 6 watts per foot.


Nearby & related entries: