Asphalt roofing manufacturers association flashing details
[DOC File]SECTION 07525
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_4775ae.html
Asphalt Roofing Manufacturers Association (ARMA) National Roofing Contractors Association (NRCA) American Society of Civil Engineers (ASCE) PERFORMANCE REQUIREMENTS Provide an installed roofing membrane and base flashing system that does not permit the passage of water, and will withstand the design pressures calculated in accordance with the most current revision of ASCE 7. …
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and more
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_937d65.html
Asphalt Roofing Manufacturers Association (ARMA). Canadian Asphalt Shingle Manufacturers' Association (CASMA): CAN/CSA A123.16 - Asphalt-Coated Glass-Base Sheet. CSA A 123.2 Asphalt Coated Roofing Sheets. CSA A 123.3-05 (R2010) Asphalt Saturated Organic Roofing Felt. CSA A 123.3-22-08 - Self-Adhering Polymer Modified Bituminous Sheet Materials Used As Steep Roofing …
[DOC File]Division 07 - Built-up Bituminous Roofing (Asphalt)
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_ff39ac.html
Section 07 51 13 - Built-Up Bituminous Roofing (Asphalt) GENERAL. WORK INCLUDES. Base Bid: (*General) (*General/Roofing) Contractor provide 4 ply glass fiber felt, asphalt, gravel surface built-up roofing and flashing systems as shown and specified. (*) Remove existing construction: (*) Gravel surface. Roofing membranes. Counterflashings. Roof drain flashings. Gravel stops. Base flashings ...
[DOCX File]Roofing, Insulation, and Composite Materials | Owens Corning
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_3e5243.html
Section 076000 - Flashing and Sheet Metal; for snow guards, metal flashing and drip edges, including step-type flashing installed with shingles. Section 077100 – Roof Specialties: Manufactured Gutters and Downspouts. Section 077200 - Roof Accessories. Section 086000 – Roof Windows and Skylights. **NOTE TO SPECIFIER** Delete references from the list below that are not required. REFERENCES ...
[DOC File]modifiedPLUS® GUIDE SPECIFICATION
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_15e4f0.html
Refer to manufacturers standard details. 3.12 Expansion Joints (Membrane set in Hot Asphalt) .1 At raised curb expansion joint details, install expansion joint membrane at the plane of the air/vapour barrier membrane..2 Loop flashing membrane down into joint ensuring that the depth of loop is a minimum 35 mm or 1.5 x the width. Extend flashing ...
[DOCX File]SECTION 07 60 00, FLASHING AND SHEET METAL
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_b285b8.html
4.Follow the recommendations of the National Roofing Contractors Association "Roofing and Waterproofing Manual" for design criteria. 5.Modify this section to address reroofing of existing roofing system. Coordinate with Section 07 01 50.19 PREPARATION FOR REROOFING for reroofing of existing facilities. GENERAL. DESCRIPTION. Formed sheet metal work for wall and roof flashing, copings, …
[DOC File]Modified Bituminous Membrane Roofing
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_0afff3.html
Asphalt Recover Board: Semi-rigid asphalt roofing substrate composed of mineral core between glass fibre mats, 1200 x 1500mm sheets, minimum thickness 3.0 mm. Total assembly RSI value: Minimum average RSI value of assembly insulation components to be 4.0. Insulation assembly components to consist of thermal barrier, insulation and cover board.
[DOC File]07 62 00 (07622) - Metal Flashings for Bituminous Membrane ...
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_ac1cc2.html
.1 Alberta Roofing Contractor’s Association (ARCA):.1 Roofing Applications Standard Manual .2 Aluminum Association (AA):.1 AA-C22-A41 Anodized Clear Coatings .2 AA-C22-A42 Integral Colour Coatings .3 American Society for Testing and Materials (ASTM):.1 ASTM A653/ A653M-08 Steel Sheet, Zinc Coated (Galvanized) or Zinc Iron Alloy Coated (Galvannealed) by the Hot Dip Process .2 ASTM …
SECTION 075200 - MODIFIED BITUMINOUS MEMBRANE ROOFING
Temporary Flashing for Permanent Roofing: Provide temporary flashing at drains, curbs, walls and other penetrations and terminations of roofing felts until the roofing membrane is complete, and the permanent flashings are applied. Temporary flashing shall consist of one ply of ply felt applied in a trowel coat of asphalt roof cement applied to a primed surface, and finished with a surface coat ...
[DOC File]07 52 00 - Modified Bituminous Membrane Roofing
https://info.5y1.org/asphalt-roofing-manufacturers-association-flashing-details_1_2fd342.html
Provide large scale details for conditions not addressed by these specifications or included with Typical Flashing Details in the “ARCA Roofing Application Standards Manual.” Provide roof plan on 8 1/2 x 11 drawing, indicating perimeter dimensions and dimensions from perimeter to drains and penetrations. WARRANTY. The Alberta Infrastructure Project Team will determine the warranty length ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.