Asphalt shingle manufacturers

    • Asphalt Shingle Manufacturers - Big Fish Contracting - Roofing Co…

      Some asphalt shingle manufacturers recommend barbed or deformed nails. Roofing Nails: ASTM F 1667; aluminum, stainless-steel, copper, or hot-dip galvanized steel wire shingle nails, minimum 0.120-inch- (3-mm-) diameter, shank, sharp-pointed, with a minimum 3/8-inch- (9.5-mm-) diameter flat head and of sufficient length to penetrate 3/4 inch (19 ...

      50 year asphalt shingles manufacturer


    • [DOC File]07 31 13 (07311) - Asphalt Shingle Roofing on Uninsulated ...

      https://info.5y1.org/asphalt-shingle-manufacturers_1_77ef11.html

      Starter Shingle Roll: As manufactured by Owens Corning Roofing and Asphalt, LLC. Self-adhering, starter course. Each strip measures 7-1/5 in (191 mm) tall by 33-2/5 ft (10.1 m) wide.

      owens corning roofing


    • [DOC File]SECTION 07311 - ASPHALT SHINGLES

      https://info.5y1.org/asphalt-shingle-manufacturers_1_7cf8c0.html

      Asphalt shingles are produced in many standard colors. Some manufacturers also offer tablike standard color tone variations on exposed portions of asphalt shingle strips. Color and Blends - As selected by Owner from manufacturer's full range. Retain one of two options in paragraph below based on type of shingle selected and roof configuration.

      architectural shingles


    • [DOC File]SHINGLE ROOFING

      https://info.5y1.org/asphalt-shingle-manufacturers_1_6e6c1c.html

      Samples: Submit 12" x 12" square of asphalt shingle showing a complete range of manufacturer’s colors. Certificates: Submit Manufacturers certification that materials and components furnished conform to specified requirements and that materials furnished are compatible for decks indicated.

      asphalt shingle manufacturer ratings


    • [DOCX File]SECTION 07 31 13 - ASPHALT SHINGLES

      https://info.5y1.org/asphalt-shingle-manufacturers_1_93104d.html

      Asphalt Shingle Roofing on. 1999-09-23 Uninsulated Wood Deck ... Notwithstanding that triple tab shingle manufacturers offer long term warranties on this type of product (but not leakage) applied to low roof slopes, the ARCA does not support this type of application. The ARCA does not offer a Certificate of Assurance for steep roofing.

      roofing shingles


    • [DOC File]SECTION 073113 - ASPHALT SHINGLES

      https://info.5y1.org/asphalt-shingle-manufacturers_1_e56e38.html

      Starter Shingle Roll: As manufactured by Owens Corning Roofing and Asphalt, LLC. Self-adhering, starter course. Each strip measures 7-1/5 in (191 mm) tall by 33-2/5 ft (10.1 m) wide.

      owens corning roof shingle colors


    • [DOCX File]Section 073113 - Fiberglass-Based Asphalt Shingles

      https://info.5y1.org/asphalt-shingle-manufacturers_1_57b33c.html

      Asphalt Shingle Recycled Content: // _____ // percent postconsumer recycled content, minimum. SPEC WRITER NOTE: Including SRI 29 limits shingle availability and color. Manufacturers require exposures greater than 5 inches to meet SRI 29. Coordinate shingle selection and exposure specified in Part 3.

      asphalt shingle manufacturers association


    • [DOC File]07311 - Asphalt Shingle Roofing on Uninsulated Wood Deck

      https://info.5y1.org/asphalt-shingle-manufacturers_1_fa7dfb.html

      Asphalt Shingle Roofing on. 2013-07-18 Uninsulated Wood Deck ... Notwithstanding that triple tab shingle manufacturers offer long term warranties on this type of product (but not leakage) applied to low roof slopes, the ARCA does not support this type of application. The ARCA does not offer a Certificate of Assurance for steep roofing.

      list of shingle manufacturers


    • [DOCX File]Roofing, Insulation, and Composite Materials | Owens Corning

      https://info.5y1.org/asphalt-shingle-manufacturers_1_3e5243.html

      Beginning at the starter course, install asphalt shingles. Apply subsequent courses of singles allowing a 5" weather exposure of the course below. Stagger butt joints 6" minimum between courses. Four (4) fasteners are required per shingle located 5/8” above each cut-out, 8-5/8” above the bottom edge of the shingle and 1 inch in from each side.

      50 year asphalt shingles manufacturer


Nearby & related entries: