Casing bead trim

    • [DOC File]Activar Construction Products Group

      https://info.5y1.org/casing-bead-trim_1_ed44ac.html

      1. For concealed flanges with drywall bead, provide edge trim for gypsum board securely attached to perimeter of frames. 2. For concealed flanges with plaster bead for full bed plaster applications, provide zinc coated expanded metal lath and exposed casing bead welded to perimeter of frames. 3.

      casing bead for stucco


    • [DOC File]SITE WORK - ARE Forum

      https://info.5y1.org/casing-bead-trim_1_16ee74.html

      Before plaster applied, trim shapes are set: square end casing bead, quarter round casing bead, corner bead, bullnose corner bead, window stool, control joint base, base screed. Plaster should be 5/8” over metal lath, ½” over gypsum lath. Exterior ¾” to 7/8”. Plaster is applied in three coats: Scratch 2 …

      beaded casing moulding


    • [DOCX File]SECTION 09 24 00 - PORTLAND CEMENT PLASTERING

      https://info.5y1.org/casing-bead-trim_1_63cf5b.html

      Casing Beads: Provide at locations where shown on construction documents and at following locations where plaster terminates to provide finish trim: Against nonplastered surfaces such as masonry, concrete, and wood. Against trim of steel frames and trim of other materials and equipment, except where trim overlaps plaster.

      stucco bead trim


    • [DOCX File]Armstrong Commercial Ceilings

      https://info.5y1.org/casing-bead-trim_1_4c23fb.html

      Metal Trim or Plastic Members (by others): Corner bead: Minimum #26 gauge, zinc alloy or plastic square edge type with expanded flanges. Casing bead: Minimum #24 gauge, zinc alloy or plastic square edge type with expanded flanges.

      parting bead trim


    • [DOCX File]senergy-specification-sentry-stucco

      https://info.5y1.org/casing-bead-trim_1_cdc632.html

      Trim: Casing bead, corner bead, expansion joint and weep screed accessories shall meet the requirements of ASTM C1063. Accessories shall be: vinyl, meeting ASTM D1784; galvanized, meeting ASTM A525 and ASTM A526; or zinc, meeting ASTM B69. Vinyl or zinc accessories are recommended where highly humid or salt-laden service conditions exist.

      stucco casing bead detail


    • [DOC File]Stucco Manufacturers Association guide specificationiton

      https://info.5y1.org/casing-bead-trim_1_12c41b.html

      Plastic Trim: Fabricated from high-impact PVC. Cornerbeads: With perforated flanges. [Square-edge] [Bull-nose] style; use unless otherwise indicated. Casing Beads: With perforated flanges in depth required to suit plaster bases indicated and flange length required to suit applications indicated. style; use unless otherwise indicated.

      stucco stop bead


    • Plastic & Vinyl Drywall Corner Beads & Finishing | Trim ...

      For the Trim-Tex two part Bumper Bead, Bumper Guard Corner Protection System, please reference Section 10 26 00 Corner Protection System. Corner Guards 1” x 1” Corner Guard. 90º Outside. 1” leg.

      stucco j bead


    • [DOC File]acrocrete-specification-platinum-ci-stucco-ultra

      https://info.5y1.org/casing-bead-trim_1_97694b.html

      A. Trim: Casing bead, corner bead, expansion joint and weep screed accessories shall meet the requirements of ASTM C1063. Accessories shall be: vinyl, meeting ASTM D1784; galvanized, meeting ASTM A525 and ASTM A526; or zinc, meeting ASTM B69. Vinyl or zinc accessories are recommended where highly humid or salt-laden service conditions exist.

      bead molding trim


    • [DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …

      https://info.5y1.org/casing-bead-trim_1_bf2221.html

      WP - Casing bead to include weep holes. Medium Flange Casing Bead: ** NOTE TO SPECIFIER ** Select model(s) from the following options and delete all others not required. Model: WF1050 - 1/2 inch (13mm) depth x 2 1/4 inch (57mm) tall vertical leg. Model: WF1058 - 5/8 inch (16mm) depth x 2 1/4 inch (57mm) tall vertical leg.

      casing bead for stucco


    • [DOC File]Stucco Manufacturers Association guide specificationiton

      https://info.5y1.org/casing-bead-trim_1_478250.html

      Casing bead shall be applied around all penetrations with a minimum ¼ inch to maximum ¾ inch gap to receive a backer rod and sealant. Gap width will depend on conditions. Unsatisfactory conditions or concerns shall be reported to the general contractor and/or builder and/or architect and/or owner.

      beaded casing moulding


Nearby & related entries:

To fulfill the demand for quickly locating and searching documents.

It is intelligent file search solution for home and business.

Literature Lottery

Advertisement