Commercial metal shelving clips
[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/commercial-metal-shelving-clips_1_43adb5.html
Metal Components and Accessories: All shelving components including accessories shall be finished with an electrostatically applied Gloss-Tek™ powder coat as outlined in Section 2.5 A and B. Laminate End Panels and Tops: Select from manufacturer’s standard high-pressure and low-pressure laminate finishes as outlined in Section 2.5 C.
[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/commercial-metal-shelving-clips_1_836920.html
Metal Components and Accessories: All shelving components including accessories shall be finished with an electrostatically applied Gloss-Tek™ powder coat as outlined in Section 2.5 A and B. Wood Components as outlined in Section 2.3 I 1 O: Select from manufacturer’s standard solid wood and veneer finishes as outlined in Section 2.5 C.
[DOC File]Home | TMI Systems Corporation
https://info.5y1.org/commercial-metal-shelving-clips_1_50561e.html
Glass panel to be captured and held in place utilizing glass retainer clips, screwed in place. Minimum eight clips per glass panel located in the four corners of the cutout. Miscellaneous Shelving (not in Cabinets): Core material: 1 inch thick particleboard. High-pressure decorative VGS laminate on …
[DOC File]HLF FURNITURE CASEWORK
https://info.5y1.org/commercial-metal-shelving-clips_1_1724b6.html
1. Clips shall have a molded ridge which shall provide pressure against edge of shelving to maintain positive pin engagement. Clip shall provide means for permanent attachments for shelf. Static test load must exceed 200 lb. per clip. Or. 2 5mm nickel plated metal supports. Paddle stopped. 3.
[DOC File]SECTION 09900 - Government of New York
https://info.5y1.org/commercial-metal-shelving-clips_1_c36d69.html
G. Metal Filler: Polyester resin base autobody filler. ... CLIPS AND FASTENERS IN REHAB PROJECTS. SEE SECTIONS 051200 AND 051201 FOR SHOP PRIMER ON NEW FABRICATED STRUCTURAL STEEL, DECKS, STAIRS, RAILINGS, CLIPS AND FASTENERS. IF EXISTING EXTERIOR STEEL REQUIRES A FINISH TOPCOAT, FOR ADDED PROTECTION OR COLOR, USE PAINT TYPE EAL …
[DOCX File]SECTION 05 50 00, METAL FABRICATIONS - Veterans Affairs
https://info.5y1.org/commercial-metal-shelving-clips_1_fc6144.html
d.Drill clips and plates, at top and bottom for anchoring jamb angles with two 9 mm (3/8 inch) expansion bolts at each location. e.Cut rabbet for pivot hinges and lock strike. SPEC WRITER NOTE: See Section 10 26 00, WALL AND DOOR PROTECTION for interior guards used in finished spaces.
[DOC File]10683 - Small Mobile Shelving Systems
https://info.5y1.org/commercial-metal-shelving-clips_1_f0b693.html
Four post shelving is the most basic type of shelving system. Metal case type shelving offers superior appearance and prevents documents from being wedged behind posts, while providing rigidity equal to or greater than four post systems. Cantilever (bracket type) …
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.