Copper tubing specifications
[DOC File]Copper Guide Specifications
https://info.5y1.org/copper-tubing-specifications_1_42acc5.html
Jan 14, 2010 · Material Specifications Standards: Copper Tubing per ASTM B68, B75, B88, B251. Electronic Valve Actuators: ISO 9001, cULus, and CSA C22.2 No. 24-93. 1.4 Submittals. Confirm product application requirements in sufficient detail to specify product as it is to be manufactured. Critical characteristics include: Family of Unit. CFM of Unit
SECTION 226300 - GAS SYSTEMS FOR LABORATORY FACILITIES
The black colored coating shall provide a minimum of 1000 hours salt spray protection per ASTM B117-97 on all external steel and copper tubing. The material shall be formulated without the inclusion of any heavy metals and shall exhibit a pencil hardness of 2H (ASTM D3363-92A), crosshatch adhesion of 4B-5B (ASTM D3359-95), and impact resistance ...
SECTION 230943 - PNEUMATIC CONTROL FOR HVAC SYSTEMS
Brazed plate heat exchanger (BPHE) is made of stainless steel with copper as the braze material. The BPHE is covered with factory-installed 0.75 inch (19.05 mm) Armaflex II or equal (ƛ=0.034 W/(m.K) at -20°C ambient) insulation. Foam insulation is used on the suction line.
[DOC File]Product Guide specifications - Magic Aire
https://info.5y1.org/copper-tubing-specifications_1_94b289.html
SPEC WRITER NOTE: Copper tubing is limited to sizes up to DN 100 (NPS 4). A.Refrigerant Piping: For piping up to 100 mm (4 inch) use Copper refrigerant tube, ASTM B280, cleaned, dehydrated and sealed, marked ACR on hard temper straight lengths.
[DOC File]Technical Specification Guide for Steam Tracing and ...
https://info.5y1.org/copper-tubing-specifications_1_36b91a.html
ANSI B16.22Wrought Copper and Wrought Copper Alloy Solder Joint Pressure Fittings. ANSI B16.29Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings - DWV. ASTM A53Pipe, Steel, Black and Hot-Dipped, Zinc Coated Welded and Seamless. ASTM A105Forgings, Carbon Steel, for Piping Components
ASTM B88 - Seamless Copper Water Tubes - Dimensions
This Guide Specification was developed to aid those involved in the writing of specifications and construction documents involving the use of copper and copper alloy piping system products. This Guide Specification contains basic information on the standards related to the manufacture of copper and copper alloy copper piping system products and ...
[DOCX File]SECTION 22 11 00 - FACILITY WATER DISTRIBUTION
https://info.5y1.org/copper-tubing-specifications_1_39be0d.html
astm a179 steel tubing with steel tubing fittings is also acceptable. copper tubing shall not be used on sulfur recovery units or in an environment where h2s will attack the copper. steam tracing shall be in accordance with eng. spec. 54d-3, sect. 3.3 or spec. 54c-15, sect. 13, and as illustrated herein.
[DOCX File]Section 23 23 00 Refrigeration Piping - Veterans Affairs
https://info.5y1.org/copper-tubing-specifications_1_739e3a.html
C.Under 75 mm (3 inch) Diameter: Copper tubing, ASTM B88, Type K, seamless, annealed. Fittings are as specified in paragraph “Above Ground (Interior) Water Piping”. Use brazing alloys, AWS A5.8M/A5.8, Classification BCuP.
[DOCX File]This section has been written to cover most (but not all ...
https://info.5y1.org/copper-tubing-specifications_1_ae68f9.html
Use copper tubing in mechanical rooms, where subject to damage or temperatures in excess of 200 deg F (93 deg C), where adjacent to heating pipes passing through common sleeve, and where not readily accessible. In mechanical rooms bundled plastic tubing with suitable junction boxes or single plastic tubing with tray or raceway may be used.
[DOCX File]Guide specifications RTAF - Trane
https://info.5y1.org/copper-tubing-specifications_1_f7b3d4.html
Confirm that tubing is capped and has not been contaminated. Make certain not to drag tubing across surfaces such as truck beds, shelves, storage racks, the floor, and/or ground of the construction site. All tubing is to be cleaned to CGA G 4.1 oxygen clean specifications prior to installation.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.