Corrugated metal for interior walls
[DOCX File]SECTION 08 11 13 - HOLLOW METAL DOORS AND FRAMES
https://info.5y1.org/corrugated-metal-for-interior-walls_1_b53311.html
Hollow metal door frames for // wood doors // and // borrowed lights // at interior locations. // Glazed openings // and // louvers // in hollow metal doors. RELATED WORK. SPEC WRITER NOTE: Update and retain references only when specified elsewhere in this section. Section 05 50 00, METAL FABRICATIONS: Frames fabricated of structural steel.
[DOC File]SECTION B – CENTRAL POWERS
https://info.5y1.org/corrugated-metal-for-interior-walls_1_9d3936.html
Examples include using pressure-treated lumber in foundations, rubber roofing material for waterproofing applications, and modern metal panels when none of these are exposed to view. Sample design drawings in this document show how such materials can be used in an unobtrusive manner to support the visible structure where period correct ...
[DOCX File]NCDOT Pipe Liner Special Provision
https://info.5y1.org/corrugated-metal-for-interior-walls_1_d78ecc.html
If the culvert material is corrugated metal, measure the thickness at 3 spots that are along a line corresponding to the corrugation crests. ... (Spiral Wound liner that is designed to fit tightly to the interior wall of the host pipe is not subject to the 1 inch annular space and grouting.) Provide details on how to hold the liner pipe to line ...
[DOC File]Construction Specification 51—Corrugated Metal Pipe
https://info.5y1.org/corrugated-metal-for-interior-walls_1_8bcc67.html
The 18 in. diameter corrugated metal outlet pipes shall be fabricated from 12 gage metal with polymer coating applied to both the interior and exterior surfaces. Coating shall be polymer grade, 10/10 as specified in ASTM A 762.
[DOC File]ITEM D-751
https://info.5y1.org/corrugated-metal-for-interior-walls_1_4203b2.html
The interior bottom shall be sloped downward toward the outlet. ... The metal steps which are embedded or built into the side walls shall be aligned and placed at vertical intervals of 300 mm. When a metal ladder replaces the steps, it shall be securely fastened into position. 751-3.5 CORRUGATED METAL STRUCTURES. Corrugated metal structures ...
[DOC File]Section 07400 - Metal Roofing, Wall Siding Panels ...
https://info.5y1.org/corrugated-metal-for-interior-walls_1_e8e49b.html
** NOTE TO SPECIFIER ** The Flexospan 7/8 inches (22 mm) corrugated metal roof and wall interior liner panel is the best choice for projects with large spans, where cost containment is important. Coil for Flexospan Corrugated steel Siding panels is stocked in four different metal materials.
SECTION 074113 - INSULATED METAL ROOF PANEL
PBC panels are attached to a building structure with exposed fasteners. The PBC panel is often used in horizontal applications on walls. 26 gauge panel is standard. Corrugated-Profile, Exposed Fastener Metal Panels: Structural metal panel consisting of formed metal sheet with alternating curved ribs, installed by lapping edges of adjacent panels.
SECTION 074213.13 - FORMED METAL WALL PANELS
General: Provide factory-formed metal liner panels designed for interior side walls and field assembled by lapping and interconnecting side edges of adjacent panels and mechanically attaching through panel to supports using concealed fasteners in side laps.
[DOCX File]SECTION 04 20 00 - UNIT MASONRY - Veterans Affairs
https://info.5y1.org/corrugated-metal-for-interior-walls_1_47f6f0.html
Exterior walls. Interior // walls // and // partitions //. RELATED REQUIREMENTS. ... Corrugated steel dovetail anchors formed of 1.5 mm (0.06 inch) thick by 25 mm (1 inch) wide galvanized steel, 90 mm (31/2 inches) long where used to anchor 100 mm (4 inch) nominal thick masonry units, 140 mm (51/2 inches) long for masonry units more than 100 mm ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.