Dana spicer axle identification
How do you identify a Spicer axle?
Steer Axle Identification The Spicer front non drive steering axles are identified with a tag located between the spring pads, on the front side of the center beam section. Spicer Steer Axle Nomenclature The Spicer model numbering system provides pertinent information about the axle for easy identification.
Why choose Dana axles?
As a world leader in innovative axle technology, Dana provides a full line of the most efficient light-duty, medium-duty, heavy-duty, and specialty rear axle products available for commercial-vehicle applications.
What is the difference between a Dana 25 and 27 axle?
Axle Identification Chart DANA 25/27 These Danas are indistinguishable in appearance. The military Model 25 has a thick, cast cover, while the 27 and civilian-model 25s have a thinner cover, will accept taller gears, and backed V-6s.
What kind of sealant do you use on Dana axles?
SILICONE RUBBER SEALANT (RTV) AND LUBRICATING GREASE AND OILS Silicone rubber sealant is used as a gasket material on Dana axles, as well as various lubricants for lubricating purposes. Before using any of these materials, one should become familiar with and follow all safety precautions as recommended by the product manufacturer/supplier.
[PDF File]Service Manual
https://info.5y1.org/dana-spicer-axle-identification_1_5c148d.html
Model Identification Parts Identification Axle Housing 1 - ID Tag Axle Shaft 2 - Axle shaft part number Data plate is located on the axle centerline Rear Axle (Top View) 4 6 5 1 3 2 7 Spicer® MODEL PART NO. RATIO MADE IN: SPEC. SERIAL NO. CUST. PART NO. Spicer® MODEL PART NO. RATIO MADE IN: SPEC. SERIAL NO. CUST. PART NO. 1 - Country of origin
[PDF File]Service Manual - Dana Incorporated
https://info.5y1.org/dana-spicer-axle-identification_1_edd3b5.html
Dana Commercial Vehicle Systems Division, presents this publication ... 2 - Axle model identification 3 - Specification number assigned to the axle built by Spicer. Identifies all component parts of the axle including special OEM requirements such as yokes or flanges. 1 - …
[PDF File]DANA/EATON AXLES •
https://info.5y1.org/dana-spicer-axle-identification_1_b7b1fa.html
SPICER & STANDARD FORGE Late Model Axles EATON 5'' Axle MERITOR P Trailer Brake w/ 1½'' dia. Cams SIRB8655 SIRB8657 SIRB8681 EATON “501” Series & ES brakes SPICER 12-1/4'' brake w/ 1-5/8'' Camshaft SIRB8684 SIRB8792
[PDF File]Illustrated Parts List - Dana Incorporated
https://info.5y1.org/dana-spicer-axle-identification_1_51117b.html
• Axle Model Identification, Part Number and Serial Number are located on a tag at the axle centerline. This information will help to locate information in this book and to identify the correct parts for servicing. Drive Axles 1 - Country or origin 2 - Axle model identification 3 - Specification number assigned to the axle built by Spicer.
[PDF File]Specifications Guide - Dana Incorporated
https://info.5y1.org/dana-spicer-axle-identification_1_460330.html
As a world leader in innovative axle technology, Dana provides a full line of the most efficient light-duty, medium-duty, heavy-duty, and specialty rear axle products available for commercial-vehicle applications.
[PDF File]Axle Identification Chart
https://info.5y1.org/dana-spicer-axle-identification_1_52c61e.html
Axle Identification Chart DANA 25/27 These Danas are indistinguishable in appearance. The military Model 25 has a thick, cast cover, while the 27 and civilian-model 25s have a thinner cover, will accept taller gears, and backed V-6s. DANA 28 The alloy-case Dana 28, with a 6 5/8-inch-diameter ring gear, came in Bronco IIS and Rangers with anything
HEAVY AXLE COMPONENTS - Spicer Parts
Spicer Steer Axle Nomenclature The Spicer model numbering system provides pertinent information about the axle for easy identification. For example: Drive Axle Identification All Spicer heavy axle assemblies are identified with two tags. One located on the differential carrier, and the other on the right front leg of the banjo housing.
[PDF File]Dana Spicer Tandem Axles
https://info.5y1.org/dana-spicer-axle-identification_1_41f6df.html
Dana Spicer Tandem Axles ... • Axle Model Identification, Part Number and / or Serial Number are located on the axle centerline. This information will help to locate information in this book and to identify the correct parts for servicing.
[PDF File]Dana Spicer Service Manual Single Speed Axle AXSM-0053 ...
https://info.5y1.org/dana-spicer-axle-identification_1_699127.html
AXLE IDENTIFICATION Figure 1-1 Spicer axles are identified with a manufacturing date and complete part numbers stamped on the right-hand tube. The part number may also appear on a metal tag attached to the cover plate by the cover screws,
Spicer Steer Axles - Dana Media Library
Model Identification Model Identification Numbering System • Spicer Steer Axles are identified with a Spicer name plate. The name plate, located on the front of the steer axle assembly, includes vital information such as Model, Part #, Serial #, and Customer Part # on it. When making parts or service inquires about your Spicer Steer Axle, be ...
[DOCX File]SPECIFICATION - Town of Houlton, Maine
https://info.5y1.org/dana-spicer-axle-identification_1_dcee24.html
rear axle and equipment. rt-46-160 46,000# r-series tandem rear axle . 5.38 rear axle ratio . iron rear axle carrier with standard axle housing . spl170 xl dana spicer main driveline with half round yokes . spl170 xl dana spicer interaxle driveline with half round yokes . driver controlled traction differential - both tandem rear axles
[DOC File]Dane County, Wisconsin
https://info.5y1.org/dana-spicer-axle-identification_1_a61408.html
If paying by check make check payable to Dane County Treasurer and indicate your federal identification number (FIN) on the subject line. CERTIFICATION. ... Dual rear low maintenance hub package Dana Spicer. Maximum axle capacity is 52,000 lbs. _____ _____ Dual rear axle automatic slack adjusters. _____ _____ Spring Brake: 3030 high output dual ...
[DOC File]GENERAL INFORMATION
https://info.5y1.org/dana-spicer-axle-identification_1_cd1fef.html
The axle and total weight ratings of the completed apparatus will not be less than the following minimum acceptable weight ratings: ... Drivelines shall be Dana (Spicer) 1810 heavy duty series or equal, with "glide coat" splines on all slip shafts. ... Instrumentation shall be backlit for easy identification.
[DOC File]333.190 Inspection of purchased commodities; material or ...
https://info.5y1.org/dana-spicer-axle-identification_1_a15887.html
AXLE; FRONT COMPLY _____YES NO_____ The front steer axle shall have a minimum rating of 10,000 lbs., Dana Spicer # E-10021 or equivalent, and will be a wide-track, I-Beam type. The front axle is to include oil-filled hubs, and be OEM approved for this application. The vehicle shall be equipped with OEM hydraulic power steering.
[DOC File]DEPARTMENT OF PUBLIC WORKS - Barnstable
https://info.5y1.org/dana-spicer-axle-identification_1_b94713.html
TANDEM AXLE TRACTOR. It is the intent of these specifications to describe the minimum requirements for a 56,000 GVWR Tandem axle tractor located at the Transfer Station. The truck will be used by the DPW for routine heavy hauling of various materials and trailers.
SECTION VI .us
54 inch axle spacing as standard. 3.9.2. Change to read: (*) Turning Diameter curb to curb, (outside front tire) both left and right. 3.10.5. Change to read: Front: Dana/Spicer ES-165-6, with outboard drums or State approved equivalent. 3.10.6. Change to read: Rear: Dana/Spicer ES-165-7, with outboard drums or State approved equivalent. 3.12.1
REQUEST FOR QUOTATION
It is the purpose of this specification to describe a new, and of the manufacturer's latest current model and design, Class 8, 4X2, diesel powered, cab and chassis truck with a single rear axle, seating for 2 persons minimum. 37,000 pound GVWR.
[DOCX File]2018 City of benton harbor request for proposal
https://info.5y1.org/dana-spicer-axle-identification_1_ec20c5.html
It shall be a Dana axle, Model D-2000F, with a rated capacity of 16,000 lb. FRONT SUSPENSION The front springs shall be a Standens, three (3)-leaf, taper leaf design, 54.00" long x 4.00" wide, with a ground rating of 16,000 lb.
[DOCX File]www.k12.wa.us
https://info.5y1.org/dana-spicer-axle-identification_1_f878b3.html
Axle—Rear. 23,000 lb. minimum total suspension GVWR. Mfr. Dana Spicer. Capacity 23,000. Axle Oil Seals. Front and rear oil bath. Mfr. Stemco Voyager. Axle Ratio. ... WSP school bus inspection identification tag. Check if as specified. Repair Manuals. A complete set of chassis, engine, transmission, and body repair manuals, including wiring ...
Dane Purchasing
Single rear heavy duty Brake Drums: cast. Use HD Gunite Drum when single axle with GAWR over 23,000 lbs. Single Rear Hubs: Iron hub pilot 11-1/4 in. bolt circle. Single rear low maintenance hub package Dana Spicer. Maximum axle capacity is 31,000lbs. Single Rear axle automatic slack adjusters. Spring Brake: 3030 high output single.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.
Hot searches
- weekly nielsen ratings
- financial meeting agenda sample
- what are bonds in finance
- combined science form 3 notes
- equation of a circle calculator with points
- sql server top offset
- entrepreneurship and innovation pdf
- ohio university school calendar 2019
- women body types with pictures
- new york board of nursing application form