Decorative brass trim strips
A-SERIES DOUBLE-HUNG, AWNING, CASEMENT, PICTURE, …
Decorative Drip Cap: 15/16 inches (24 mm) high by 2 1/4 inches (57 mm) deep. specifier note: if trim board is required for project, retain paragraph and subparagraph above for vinyl trim board or paragraph and subparagraph below for vinyl laminated board. Specifier Note: Andersen® bay windows can be wall supported or suspended.
[DOC File]CSI PRODUCT SPECIFICATIONS - Welcome to 2/90 Sign …
https://info.5y1.org/decorative-brass-trim-strips_1_860c0a.html
Accent Strips are satin anodized and can be color matched in painted acrylic lacquer. SPEC WRITER NOTE: List Trim Style and Color. Top/Bottom Trim extruded in 6063-T5 aluminum provides decorative trim cap, which butts flush to adjacent Copy Insert and encloses top or …
[DOCX File]Architecture Engineering and Construction
https://info.5y1.org/decorative-brass-trim-strips_1_79c55b.html
High-Pressure Decorative Laminate: NEMA LD 3, grades as indicated, or if not indicated, as required by indicated woodwork quality standard. a color/style could be included here for simple projects, or in specific product description for more difficult project, or on drawings for very complex projects.
[DOCX File]Case Systems, Inc
https://info.5y1.org/decorative-brass-trim-strips_1_3d7399.html
ANSI-A161.2-1998: for performance of fabricated high-pressure decorative laminate countertops. ANSI-A208.1-2016: for grade M-3i mat-formed wood particleboard. BHMA A156.9: for grade-1 hinge requirements. NEMA 3 LD-2005: for performance requirements of high pressure laminates. SEFA 8PL Recommended Practices: for cabinet construction.
[DOCX File]SECTION 10 14 00 - SIGNAGE - Veterans Affairs
https://info.5y1.org/decorative-brass-trim-strips_1_b38101.html
The sign face and changeable sign strips are to be 2.3 mm (0.090 inch) minimum to 3.2 mm (0.125 inch) thick aluminum. Mount aluminum faces and changeable strips into framed extruded cabinet face to allow for removal from top or side, so that faces can be changed without affecting extruded sign structure.
[DOCX File]SECTION 10 14 00 - SIGNAGE - WBDG
https://info.5y1.org/decorative-brass-trim-strips_1_5ab725.html
4.The sign face and changeable sign strips are to be 2.3 mm (0.090 inch) minimum to 3.2 mm (0.125 inch) thick aluminum. Mount aluminum faces and changeable strips into framed extruded cabinet face to allow for removal from top or side, so that faces can be changed without affecting extruded sign structure.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.