Dissimilar metals aluminum and steel
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_1b16df.html
1. General: Use of dissimilar metals in direct contact is not permitted unless otherwise noted in this Section. 2. Jalousie window frames: Extruded aluminum sections of 6063 T5 alloy. Frame members shall be not less than 2 1/2 inches deep and shall be 0.075 inch thick with an extrusion tolerance acceptable to the trade of plus or minus 0.006 inch.
[DOCX File]SECTION 08 41 13 - ALUMINUM-FRAMED ENTRANCES AND …
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_970555.html
Apply dielectric tape or barrier coating to aluminum surfaces in contact with // dissimilar metals // and cementitious materials // to minimum 0.7 mm (30 mils) dry film thickness. INSTALLATION - GENERAL
SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS
Corrosion Protection: Coat concealed surfaces of aluminum that will be in contact with grout, concrete, masonry, wood, or dissimilar metals, with a heavy coat of bituminous paint, or …
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_7fa3fd.html
D. Where aluminum surfaces are in contact or fastened to masonry, concrete, wood, or dissimilar metals, the aluminum surface shall be protected from dissimilar materials as recommended in the Appendix to AAMA 101, “Voluntary Specifications for Aluminum, …
SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS
Corrosion Protection: Coat concealed surfaces of aluminum that will be in contact with grout, concrete, masonry, wood, or dissimilar metals, with a heavy coat of bituminous paint. Adjust railings before anchoring to ensure matching alignment at abutting joints.
[DOC File]GENERAL GUIDE SPECIFICATION - Wausau Window
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_55cc14.html
Aluminum that is not organically coated shall be insulated from direct contact with steel, masonry, concrete or other dissimilar metals by bituminous paint, rust-inhibiting primer, non-conductive shims or other suitable insulating material, if exposure to moisture will …
[DOC File]GUIDE SPECIFICATIONS - SECTION 08520
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_b6e89e.html
Any uncoated aluminum components of Aluminum Storefront and Entrances shall be insulated from direct contact with steel, masonry, concrete, or other dissimilar metals by bituminous paint, zinc chromate primer, nonconductive shims, or other suitable insulating materials.
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_f5911e.html
When aluminum components come into contact with dissimilar metals, surfaces shall be kept from interacting through painting the dissimilar metal with a heavy coat of a proper primer. The use of plastic grommets and/or PVC sleeves is encouraged to prevent contact between stainless steel cables and aluminum hole edges.
[DOCX File]SECTION 07 60 00, FLASHING AND SHEET METAL
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_b285b8.html
Isolate aluminum in contact with dissimilar metals others than stainless steel, white bronze or other metal compatible with aluminum by: Paint dissimilar metal with a prime coat of zinc-chromate or other suitable primer, followed by two coats of aluminum paint.
[DOCX File]SECTION 08411 - ALUMINUM-FRAMED ENTRANCES AND …
https://info.5y1.org/dissimilar-metals-aluminum-and-steel_1_0a5087.html
Where aluminum will contact dissimilar metals, protect against galvanic action by painting contact surfaces with primer or by applying sealant or tape or installing nonconductive spacers as recommended by manufacturer for this purpose.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.