Eaton non fused disconnect switch
[DOC File]PSG Section 16441A - Eaton
https://info.5y1.org/eaton-non-fused-disconnect-switch_1_b92f43.html
The Contractor shall furnish and install the low-voltage fused and non-fused switches as specified herein and as shown on the contract drawings. Related Sections. References. The switches and all components shall be designed, manufactured and tested in accordance with the latest applicable standards: NEMA KS-1. UL 98. Submittals – for Review ...
SECTION 262816.11 - SAFETY DISCONNECT SWITCHES
Low-voltage fused and non-fused switches. Fuses for fused switches. Related Sections: Division 01 Section "General Requirements." Division 01 Section "Special Procedures." Division 26 Section "Common Work Results for Electrical". Division 26 Section “Inspections and Testing of Electrical Work”. Division 26 Section "600 Volt Conductors and ...
SPECGUID.MW5 - Eaton
The transfer switch shall be equal to an Eaton ATC-300+ type microprocessor-based controller. ... The harness shall include a keyed disconnect plug to enable the control panel to be disconnect from the transfer switch for routine maintenance. ... “Automatic” and “Non-Automatic”. The transfer switch shall be transferred by actuating a ...
[DOCX File]Architecture Engineering and Construction
https://info.5y1.org/eaton-non-fused-disconnect-switch_1_c0bdde.html
In the fused switch, provide a solid full height and width insulating barrier between the energized switch and bus components toward the front portion of the switch and a storage compartment in the rear of the fused switch. Provide a storage rack sized for storing 3 spare fuses in their original cartons inside the fused switch rear door.
[DOCX File]Architecture Engineering and Construction
https://info.5y1.org/eaton-non-fused-disconnect-switch_1_361ef7.html
Medium voltage motor starters shall be rated 5kV, of the fused disconnect switch, vacuum breaker contactor type, with 3 motor feeder CT's and overload relays, "hand-off-auto" selector switch, red "run" pilot light, 120 volt fused control transformer, 2 N.O. and 2 N.C. auxiliary contacts, and code gauge NEMA Type 1 enclosure indoors or a NEMA Type 3R enclosure outdoors.
[DOC File]PSG Section 26 28 16.13 - Eaton
https://info.5y1.org/eaton-non-fused-disconnect-switch_1_b52be5.html
The Contractor shall furnish and install the low-voltage fused and non-fused switches as specified herein and as shown on the contract drawings. Related Sections. References. The switches and all components shall be designed, manufactured and tested in accordance with the latest applicable standards: NEMA KS-1. UL 98. Submittals – for Review ...
SECTION 262816.11 - SAFETY DISCONNECT SWITCHES
Switch assembly and operating handle shall be an integral part of the enclosure base. Switches rated 30 A to 600 A shall have reinforced fuse clips. Switch blades shall be readily visible in the “ON” and “OFF” position. Switch operating mechanism shall be non-teasable, positive quick-make/quick-break type.
[DOCX File]SECTION 26 24 13
https://info.5y1.org/eaton-non-fused-disconnect-switch_1_95061b.html
And KS 1 for “Fused and Non-fused Switches.” ... Switchboards shown located off a wall, where access is possible on all sides, shall be equal to Eaton Pow-R-Line C Type. All vertical sections shall align front and rear with uniform depth as shown on the drawings. ... All internal devices, except the main disconnect shall be removable from ...
SPECGUID.MW5
Non-Automatic Control: Provide a 3-Position Selector Switch, maintained contact, marked: “Automatic” and “Non-Automatic”. The transfer switch shall be transferred by actuating a three position maintained selector switch labeled “Source 1”, “Off” and “Source 2”. A …
16496G - Eaton
The transfer switch shall be equal to an Eaton ATC type microprocessor-based controller. ... The harness shall include a keyed disconnect plug to enable the control panel to be disconnect from the transfer switch for routine maintenance. ... marked: “Automatic” and “Non-Automatic”. The transfer switch shall be transferred by actuating a ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.