Hot cold water mixing valve
[DOC File]July 16, 1998 - Armstrong International
https://info.5y1.org/hot-cold-water-mixing-valve_1_9b8624.html
DRV shall have four thermistors integral of the mixing valve body that measure the cold water inlet, hot water inlet, mixed water outlet, and over-temp safety temperatures. DRV mixing valve body shall be of 316L stainless steel, mixing valve proportioner of 316L stainless steel, and a NEMA 3S electronics enclosure. DRV80 shall have 3” inlets and outlet connections that will deliver 94 gpm ...
SECTION 224000 - PLUMBING FIXTURES
Faucet: [Single-control mixing] [Single-control nonmixing] [Two-handle mixing] valve. Include hot- and cold-water indicators; coordinate faucet inlets with supplies and fixture holes; coordinate outlet with spout and fixture receptor. 1. Maximum Flow Rate: [0.5 gpm] [2.2 gpm] [2.5 gpm] . 2. Maximum Flow: [0.25 gal.] . LAVATORY (L-2) Lavatory: [ANSI ...
[DOC File]July 16, 1998 - Armstrong International
https://info.5y1.org/hot-cold-water-mixing-valve_1_652034.html
DRV shall have four thermistors integral of the mixing valve body that measure the cold water inlet, hot water inlet, mixed water outlet, and over-temp safety temperatures. DRV mixing valve body shall be of 316L stainless steel, mixing valve proportioner of 316L stainless steel, and a NEMA 3S electronics enclosure. DRV80R shall have 3” inlets and outlet connections that will deliver 94 gpm ...
[DOC File]SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES
https://info.5y1.org/hot-cold-water-mixing-valve_1_109a26.html
Standard Thermostatic, Water Mixing Valves: ASSE 1017, liquid-filled motor and piston control mechanism with positive shutoff of hot water when cold water supply is lost. Water flow is shut off in event of thermostat failure. Bronze valve body and cap with replaceable corrosion-resistant components, including stainless steel piston and liner. Equipped with integral check stops and removable ...
[DOC File]Plumbing Specialties and Accessories
https://info.5y1.org/hot-cold-water-mixing-valve_1_0e6652.html
Provide check stops on hot/cold water inlet to each valve. Provide a pressure regulating valve that responds to varying flow requirements. Each tempered water valve to be thermostatic mixing type with liquid filled thermostatic motors that sense and control water temperature. Assembly shall be capable of maintaining water temperature to within 8ºC above setpoint within the range of 4ºC to ...
[DOCX File]Section 22 05 23 - GENERAL-DUTY VALVES FOR PLUMBING PIPING
https://info.5y1.org/hot-cold-water-mixing-valve_1_bf92b9.html
Upon cold water supply failure the hot water flow shall automatically be reduced to 0.5 gpm maximum. //Provide a high temperature alarm device to detect mixing valve failure.// SPEC WRITER NOTE: Individual shower and tub mixing valves are included with fixtures in Specification Section 22 40 00, PLUMBING FIXTURES.
[DOC File]Date:
https://info.5y1.org/hot-cold-water-mixing-valve_1_26544f.html
Valve shall be furnished with lockable shutoff valves on the hot and cold water supplies, internal check valves to prevent cross-mixing of hot and cold water and stainless steel basket filters to remove debris from the water flow. Valve shall be furnished with outlet temperature gauge and stainless steel mounting bracket. Valve shall meet the requirements of the U.S. Safe Drinking Water Act as ...
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.