M min to fpm
Section 15820 - Dampers
Capacity: 300 fpm to 2,000 fpm (93 m/min to 610 m/min) at 2 inch w.g. (0.50 kPa) maximum. Monitor airflow within accuracy of plus/minus 5 percent. Leakage: Maximum 2.0 cubic feet per minute per square foot (0.6 m3/min/sm) at 1 inch w.g. (0.25 kPa) for 48 inches …
[DOC File]Garaventa Xpress II Design Specifications
https://info.5y1.org/m-min-to-fpm_1_8177cb.html
Travel Speed: 4m/min (13 fpm) traveling up; 5 m/min (16 fpm) traveling down. Platform Deck: Surface shall be slip resistant with the following features: ** NOTE TO SPECIFIER ** Select the following paragraph for standard ADA compliant platform size.
[DOC File]Section 23 40 00 - HVAC AIR CLEANING DEVICES
https://info.5y1.org/m-min-to-fpm_1_77fc09.html
Test for 150 m/min (500 fpm) will be accepted for lower velocity rated filters provided the test report of an independent testing laboratory complies with all the requirements of this specification. 2. Guarantee Performance: The manufacturer shall supply ASHRAE 52.2 test reports on each filter type submitted. Any filter supplied will be ...
ABRASIVES
The speed of a grinding wheel is expressed in surface feet per minute (fpm) or, in the metric system, meters per minute (m/min). It is easiest to think of surface speeds as the distance a given point on the outside of the wheel will travel in a minute. Most vitrified wheels operate at about 6500 fpm (1980 m/min), or a little over 60 mph (97 km/h).
[DOC File]Section 14423 - Garaventa Lift
https://info.5y1.org/m-min-to-fpm_1_2e89d6.html
Travel Speed: 13 fpm (4 m/min) traveling up; 16 fpm (5 m/min) traveling down. Platform Deck: Surface shall be slip resistant with the following features: ** NOTE TO SPECIFIER ** Select one of the following paragraphs for alternate platforms sizes when required for the project.
[DOCX File]Section 23 31 00 - HVAC DUCTS AND CASINGS
https://info.5y1.org/m-min-to-fpm_1_cd63d6.html
Acoustic insertion loss shall not be less than 3 dB per 300 mm (foot) of straight duct, at 500 Hz, based on 150 mm (6 inch) duct, of 750 m/min (2500 fpm). D.Application Criteria: 1.Temperature range: -18 to 93 degrees C (0 to 200 degrees F) internal.
[DOCX File]Price List No - Industrial marketing
https://info.5y1.org/m-min-to-fpm_1_a4ffaf.html
May 15, 2011 · Infinitely variable: 60 to 400 FPM (18 to 122 m/min). Blade speed can be automatically set when material is selected. Tilting Column: For miter cutting up to 60o left and right of vertical. Electrically powered, chain driven, with encoder feedback and MARVEL PCIII controller. 0° - 3° Canted Column:
[DOCX File]Price List No - Industrial marketing
https://info.5y1.org/m-min-to-fpm_1_2c8073.html
May 15, 2011 · 30 to 650 FPM (9 to 200 m/min), Standard. 30 to 650 FPM (9 to 200 m/min), Optional (Modification M1). Tilting Column: For miter cutting up to 60o left and right of vertical. Hydraulically powered cam link design includes. built-in protractor; Digital Readout available (Option Code SP2220). 3° …
www.reliablelouvers.com
A.Galvanized steel control dampers suitable for applications in HVAC systems with velocities to 2000 feet per minute (610 m/min). 1.2RELATED SECTIONS ** NOTE TO SPECIFIER ** Edit the following list as required for the project. List other sections with work directly related to the dampers. A.Section 23 31 00 – HVAC Ducts and Casings.
[DOCX File]Section 23 40 00 - HVAC AIR CLEANING DEVICES
https://info.5y1.org/m-min-to-fpm_1_a2095f.html
Test for 150 m/min (500 fpm) will be accepted for lower velocity rated filters provided the test report of an independent testing laboratory complies with all the requirements of this specification. SPEC WRITER NOTE: Witness testing may be required by the COR on clean room systems and bag-in bag-out systems.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.