Manual balancing dampers
SECTION 233113 - METAL DUCTS
Manual Balancing Dampers: Fabricate as specified. Leave 1/8 (3 mm) maximum gap between damper blade and duct wall. Install dampers in separate, flanged, bolted, removable duct sections. Coat fume exhaust ducts requiring internal coating, as specified hereinafter.
[DOC File]SECTION 15820 - DUCT ACCESSORIES
https://info.5y1.org/manual-balancing-dampers_1_1aeb7e.html
MANUAL BALANCING DAMPERS. GENERAL. SECTION INCLUDES. Remote cable operated balancing dampers suitable for application in HVAC systems with velocities to 1,500 fpm (7.7 m/s). SUMMARY. Section 233100 – HVAC Ducts and Casings (Previously 15810). Section 230913.13 – Actuators and Operators (Previously 15900). REFERENCES
[DOCX File]SECTION 230593 - TESTING, ADJUSTING, AND BALANCING
https://info.5y1.org/manual-balancing-dampers_1_f52826.html
SECTION 230593 - TESTING, ADJUSTING, AND BALANCING. GENERAL. DESCRIPTION. This section describes adjustment, testing, and balancing of air systems, hydronic systems, and miscellaneous mechanical equipment. RELATED WORK SPECIFIED ELSEWHERE. Section 230900, Instrumentation and Controls for HVAC . Section 232400, Prefabricated Piping Systems
[DOCX File]Michigan State University
https://info.5y1.org/manual-balancing-dampers_1_22cffe.html
Examine systems for installed balancing devices, such as test ports, gage cocks, thermometer wells, flow-control devices, balancing valves and fittings, and manual volume dampers. Verify that locations of these balancing devices are accessible.
[DOC File]SECTION 230593 - TESTING, ADJUSTING, AND BALANCING
https://info.5y1.org/manual-balancing-dampers_1_d641ac.html
Perform balancing on existing systems prior to any system revisions being made. Do not perform testing, adjusting, and balancing work until heating, ventilating, and air conditioning equipment has been completely installed, operational testing of control system is complete, and hydronic systems have been cleaned and treated per requirements of ...
[DOC File]SECTION 230593 - TESTING, ADJUSTING, AND BALANCING …
https://info.5y1.org/manual-balancing-dampers_1_7dbbe1.html
Examine systems for installed balancing devices, such as test ports, gage cocks, thermometer wells, flow-control devices, balancing valves and fittings, and manual volume dampers. Note the locations of devices that are not accessible for testing and balancing. Examine the approved submittals for HVAC systems and equipment.
[DOC File]SECTION 233313-CONTROL DAMPERS
https://info.5y1.org/manual-balancing-dampers_1_ced29a.html
MANUAL BALANCING DAMPERS. GENERAL. 1.1 SECTION INCLUDES. Manual balancing dampers suitable for application in HVAC systems with velocities to 1,500 feet per minute (7.7 m/s). 1.2 SUMMARY. Section 233100 – HVAC Ducts and Casings (Previously 15810). Section 230913.13 – Actuators and Operators (Previously 15900). 1.3 SUBMITTALS
Section 15820 - Dampers
Round manual balancing dampers with integral airflow monitor. RELATED SECTIONS ** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required. Section 10200 – Louvers. Section 15810 - Ducts. Section 15900 - HVAC Instrumentation and Controls.
[DOCX File]Section 23 05 93 - TESTING, ADJUSTING, AND BALANCING …
https://info.5y1.org/manual-balancing-dampers_1_b90ab8.html
Examine systems for installed balancing devices, such as test ports, gage cocks, thermometer wells, flow-control devices, balancing valves and fittings, and manual volume dampers. Verify that locations of these balancing devices are accessible.
[DOC File]United Enertech
https://info.5y1.org/manual-balancing-dampers_1_eaa2d5.html
Round Remote Control operated balancing dampers applicable for use in HVAC systems with velocities to 2,600 fpm ( 13.2 m/s) SUMMARY Section 233100 - HVAC Ducts and Casings (Previously 15810).
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.