Metal cabinet shelf clip
[DOCX File]Case Systems, Inc
https://info.5y1.org/metal-cabinet-shelf-clip_1_3d7399.html
Shelf clips shall be: single pin plastic shelf clip with anti-tip locking tabs, used for all 1/4" hardboard shelves. Coat Hooks shall be Zinc plated, single prong and double prong. Closet Rods shall be Zinc …
[DOC File]SECTION 064113 - WOOD-VENEER-FACED ARCHITECTURAL …
https://info.5y1.org/metal-cabinet-shelf-clip_1_1bd579.html
Rests in "Shelf Rests" Paragraph below are installed in holes drilled in cabinet sides and partitions. Shelf Rests: ANSI/BHMA A156.9, B04013; [metal] [plastic] [two-pin plastic with shelf hold-down clip]. …
[DOC File]PART 1
https://info.5y1.org/metal-cabinet-shelf-clip_1_3f277c.html
All metal storage and cabinet products are to contain recycled content. Design and Construction: 18 gage clip-type adjustable shelving of modular unit construction of individual bolted frame assemblies, constructed in such a way that any section can be relocated and each shelf …
[DOCX File]Case Systems, Inc
https://info.5y1.org/metal-cabinet-shelf-clip_1_cd1a14.html
Shelf Clips: [Standard: Plastic] Shelf clips shall be injected molded clear plastic, with a double pin engagement 32mm on center and shall have 3/4" and 1" anti-tip locking tabs as approved in AWI 400B-T-9 for premium Grade. Shelf clips shall be: single pin plastic shelf clip …
[DOC File]TG08710 v06.08 - Hawaii
https://info.5y1.org/metal-cabinet-shelf-clip_1_67cb71.html
B. Base Metals: Produce hardware units of basic metal and forming method specified, using manufacturer’s standard metal alloy, composition, temper and hardness, but in no case of lesser …
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/metal-cabinet-shelf-clip_1_df5f83.html
Shelf Clip Materials: Injected molded clear plastic; standard. ** NOTE TO SPECIFIER ** Delete double pin shelf clip design or single shelf clips design if not required. Double Pin Shelf Clip Design: Double …
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/metal-cabinet-shelf-clip_1_66bdc7.html
Up to 27 inches (686 mm) wide: Removable molded polyethylene shelf, with impact-resistant, radiused front edge, mounted to cabinet wall with self-locking clip. Over 27 inches (686 mm) wide: For large instrument casework: Removable formed polyethylene shelf…
[DOC File]HLF FURNITURE CASEWORK
https://info.5y1.org/metal-cabinet-shelf-clip_1_1724b6.html
Clip shall provide means for permanent attachments for shelf. Static test load must exceed 200 lb. per clip. Or. 2 5mm nickel plated metal supports. Paddle stopped. 3. Dividers that are ¼” thick shall be fully adjustable and retained with injection molded nylon clip. Clip …
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.