Metal wall shelving units
[DOC File]SECTION 10674 - McMurray Stern
https://info.5y1.org/metal-wall-shelving-units_1_190f50.html
SECTION 105613 – METAL STORAGE SHELVING (FrameWRX) GENERAL. RELATED DOCUMENTS. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. SUMMARY. This Section includes the following: Cantilever bracket type metal shelving…
[DOC File]PART 1
https://info.5y1.org/metal-wall-shelving-units_1_3f277c.html
Above-noted Shelving: Extend from wall to wall in rooms indicated on the Drawings to receive metal storage shelving. Provide standard width units of 30 inches, 36 inches and 42 inches. Provide metal shelving in Rooms as noted on the plans. Wall Attachment Hardware: Provide manufacturer’s recommended brackets and mounting screws for wall ...
[DOC File]SECTION 10674 - High Density Mobile Shelving and Storage ...
https://info.5y1.org/metal-wall-shelving-units_1_4b019a.html
Fabricate units from Class 1, cold-rolled steel sheet with all bends sharp and true and no exposed “knife” edges. All units shall be free of burrs, sharp edges and projecting hardware with smooth, non-abrasive surfaces and edges. After fabrication, shelving …
[DOCX File]Cantilever Metal Storage System - Shelving Systems by E-Z ...
https://info.5y1.org/metal-wall-shelving-units_1_bd425d.html
Coordinate shelving system layout with columns, wall-mounted pipes and conduit, and other wall protrusions. Provide cut-outs in shelving [and countertops] such that components fit tight around …
[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/metal-wall-shelving-units_1_43adb5.html
Metal Components and Accessories: All shelving components including accessories shall be finished with an electrostatically applied Gloss-Tek™ powder coat as outlined in Section 2.5 A and B. …
[DOCX File]SECTION 10674
https://info.5y1.org/metal-wall-shelving-units_1_ec8415.html
SECTION 105613 – METAL STORAGE SHELVING (Four-Post) GENERAL. RELATED DOCUMENTS. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. SUMMARY. This Section includes the following: Four-post type metal shelving…
[DOC File]Section 10 56 26 - Mobile Storage Shelving
https://info.5y1.org/metal-wall-shelving-units_1_1bc6e8.html
Aug 28, 2012 · All units shall be free of burrs, sharp edges and projecting hardware with smooth, non-abrasive surfaces and edges. After fabrication, shelving shall exhibit no dents, “oil canning”, buckling or other surface irregularities. Face Panels: Covered with a high-pressure laminate in a color to match the shelving.
[DOC File]SECTION 105613 (10675) – METAL STORAGE SHELVING (Four …
https://info.5y1.org/metal-wall-shelving-units_1_836920.html
Metal Components and Accessories: All shelving components including accessories shall be finished with an electrostatically applied Gloss-Tek™ powder coat as outlined in Section 2.5 A and B. Wood …
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.