Mirror finish stainless steel

    • [DOC File]DIVISION 8 - DOORS AND WINDOWS

      https://info.5y1.org/mirror-finish-stainless-steel_1_36fa1d.html

      Finish Plans: these plans are a part of architectural drawing set as an adjunct to the finish schedule. Use for showing wall, ceiling and floor patterns and identifying stopping and starting points for finishes exterior elevations may be used to show locations of various finishes identified by finish code and materials.

      mirror finish stainless steel angle

    • Surface Finish Stainless Steel Sheet, Bead Blast Finish

      Finish of Stainless steel – ornamental directional finish , #4 ( Satin finish) standard , #7 ( mirror finish) - optional Protect mechanical finishes on exposed surfaces from damage by applying a strippable, temporary protective covering before shipping.

      polished metal mirror sheets

    • [DOC File]CABLEGUARD™ ELASTOMERIC WRAP

      https://info.5y1.org/mirror-finish-stainless-steel_1_615fa5.html

      6. Cladding (door wings and round drum only): shall be stainless steel or muntz metal (brass alloy) in #8 mirror finish or #4 brushed satin finish. C. DOOR WING CONSTRUCTION: 1. Corner block type with 3/16” steel backup plate construction, mechanically secured with minimum of four hardened steel screws.

      polished metal mirror

    • [DOCX File]ARCAT, Inc.

      https://info.5y1.org/mirror-finish-stainless-steel_1_3da481.html

      Steel Plate: ASTM A36, A588 or A572. Stainless Steel: ASTM A240, Type 304, with a minimum No. 8 mirror finish. Polytetrafluoroethylene (PTFE). PTFE sheet shall be manufactured from pure virgin unfilled TFE resin conforming to the material requirements of …

      stainless steel #8 mirror finish

    • SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS

      748 Frameless Stainless Steel mirror: Type 304 No. 8 bright finish stainless steel mirror, stretcher leveled. Tempered hardboard backer bonded to mirror with adhesive. Maximum Size: 47" W x 72" H. 7481 Frameless Stainless Steel mirror: Type 430 bright annealed stainless steel mirror…

      polished steel mirror

    • [DOC File]SECTION 102813.17 - SHOWER ROOM ACCESSORIES

      https://info.5y1.org/mirror-finish-stainless-steel_1_b07655.html

      Frameless stainless steel mirror with bright polish finish. Bobrick Model No. B-1556. Mop and Broom Holders: Provide one each at every custodial closet, over the mop sink. Size: 36 inch long with 4 mop holders and 3 hooks. Wall-surface mounted. Stainless steel finish. Bobrick Model No. B-224. Paper Towel Dispenser: Provide one in each single ...

      polishing stainless steel mirror finish

    • [DOC File]PART 1 - browardschools

      https://info.5y1.org/mirror-finish-stainless-steel_1_fdb35d.html

      ASTM A240 Type 304 stainless steel finish to be #2B. ASTM A240 Type 304 stainless steel finish to be #4 satin. Pattern to be RGM pattern as manufactured by Rigidized Metals Corporation, 658 Ohio Street, Buffalo NY 14203, (800) 836-2580. ** NOTE TO SPECIFIER ** Delete tubing diameter not required. Tubing diameter: 1.5 inches (38 mm).

      stainless steel mirror finish process

Nearby & related entries:

To fulfill the demand for quickly locating and searching documents.

It is intelligent file search solution for home and business.

Literature Lottery

Advertisement
Hot searches

©2024 5y1.org, Inc. All rights reserved.