Nema 6 enclosure definition

    • [DOCX File]Section 22 15 00 - GENERAL SERVICE COMPRESSED-AIR …

      https://info.5y1.org/nema-6-enclosure-definition_1_efd4b3.html

      Enclosure: NEMA ICS 6, Type 12 control panel unless otherwise indicated. Motor Controllers: Full-voltage, combination magnetic type with undervoltage protective feature and motor-circuit-protector-type disconnecting means and short-circuit protective device.

      nema type 3r enclosure definition


    • [DOC File]SECTION 231126 - FACILITY LIQUEFIED-PETROLEUM GAS …

      https://info.5y1.org/nema-6-enclosure-definition_1_79cec4.html

      Control Compartment Enclosure: NEMA 250, Type 4, enclosure housing control panels. ASME-stamped surge tank with venturi, isolation valves, excess-flow safeties, and safety relief valves. Retain first paragraph below only if outlet pressure between 12 and 20 psig (82.7 and 138 kPa) is required. Blower: Positive-displacement, rotary-lobe type.

      nema type 6p


    • SECTION 262923 - VARIABLE FREQUENCY DRIVES

      Enclosure: ANSI/NEMA ICS 6; Type [NEMA 1.] [NEMA 4] [NEMA 4X] [NEMA 12.] Upon a fault detection and VFD trip, the alarm contact shall open on the VFD, for external connection and remote indication, to signify a fault condition (contact rating of 0.5 amps resistive at 120 VAC).

      nema 6p enclosure


    • [DOC File]SECTION 260543 - UNDERGROUND DUCTS AND RACEWAYS …

      https://info.5y1.org/nema-6-enclosure-definition_1_c8055d.html

      Comply with NEMA RN 1. Coating for Fittings for PVC-Coated Conduit: Minimum thickness of 0.040 inch, with overlapping sleeves protecting threaded joints. RNC: NEMA TC 2, Type EPC-40-PVCUL 651, with matching fittings by same manufacturer as the conduit, complying with NEMA TC 3 and UL 514B.

      nema 3r 12 definition


    • [DOCX File]A Joint Standard of AASHTO, ITE, and NEMA

      https://info.5y1.org/nema-6-enclosure-definition_1_71a837.html

      AASHTO, ITE, and NEMA disclaim liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document.

      nema 6 box


    • [DOCX File]Florida Building

      https://info.5y1.org/nema-6-enclosure-definition_1_1457cc.html

      New definition clarifying the distinction between accessible and having access to something. Access To is defined as that which enables a device, appliance, or equipment to be reached by ready access or by a means that first requires the removal or movement of a panel, door, or similar obstruction.

      nema type 6 enclosure


    • [DOCX File]Pelco

      https://info.5y1.org/nema-6-enclosure-definition_1_0966bb.html

      National Electrical Manufacturers Association, NEMA 250-2003, 4X Enclosure Definition . 1.03 SUBMITTALS. Product Data. Manufacturer’s printed or electronic data sheets. Manufacturer’s installation and operation manuals. Warranty documentation. 1.04 QUALIFICATIONS.

      nema ics 6 enclosure


    • [DOC File]SECTION 083323 - OVERHEAD COILING DOORS

      https://info.5y1.org/nema-6-enclosure-definition_1_94a08b.html

      Provide control equipment complying with NEMA ICS 1, NEMA ICS 2, and NEMA ICS 6, with NFPA 70 Class 2 control circuit, maximum 24 V, ac or dc. Durability requirement in first paragraph below is separate from operation cycles, which apply to the whole door system and are discussed in "Performance Requirements" Article.

      nema ics 6 type 1


    • [DOC File]ARTICLE 553 Floating Buildings

      https://info.5y1.org/nema-6-enclosure-definition_1_fd0f39.html

      For various configurations and ratings of locking and grounding-type receptacles and caps, see ANSI/NEMA 18WD 6-1989, National Electrical Manufacturers Association’s Standard for Dimensions of Attachment Plugs and Receptacles. (b) Receptacles rated for 60 amperes or 100 amperes shall be of the pin and sleeve type.

      nema type 3r enclosure definition


    • [DOC File]Pelco

      https://info.5y1.org/nema-6-enclosure-definition_1_9edbf4.html

      National Electrical Manufacturers Association, NEMA 250-2003, 4X Enclosure Definition . 1.03 SUBMITTALS. Product Data. Manufacturer’s printed or electronic data sheets. Manufacturer’s installation and operation manuals. Warranty documentation. 1.04 QUALIFICATIONS. Manufacturer shall have a minimum of seven years’ experience in producing ...

      nema type 6p


Nearby & related entries: