Resistor values by color
[DOC File]Resistors
https://info.5y1.org/resistor-values-by-color_1_8c2b43.html
Worksheet - Resistor Color Codes NAME _____ The purpose of this worksheet is to help review your understanding of resistor color codes. Given 10 different sets of color bands, determine the resistor values and tolerances. 1st Band 2nd Band 3rd Band 4th …
[DOC File]Laboratory # 2 Resistive Circuits
https://info.5y1.org/resistor-values-by-color_1_c04678.html
Refer to a resistor color code chart. Interpret the color bands as numerical values, starting from left to right. The third band is the exponent on a x10 multiplier. So we have 2.2 kΩ = 2.2 K. Our tolerance band is the fourth band. It’s gold in this case, meaning that our tolerance is 5%.
[DOC File]ENTC 2310 Electrical Principles
https://info.5y1.org/resistor-values-by-color_1_8f32d4.html
Resistor Values. Color Code Nominal Value, k Measured Value, k Using the Protoboard, connect all 4 resistors in a network between terminals A and B in whatever way you choose. You will try various combinations in this activity so go ahead and just try something. Draw the schematic in the box labeled Network #1 in Table 2 with enough room to ...
Here, we will find the maximum and minimum specified ...
Get 4 resistors, of different values from the supply cabinet. Note the color code and nominal value of all 4 resistors according to the resistor color code and record in Table 1. Measure each resistor’s value with the DMM and record in the same table. Table 1. Resistor Values. Color Code Nominal Value Measured Value % Error
Worksheet - Resistor Color Codes
Resistors are color coded. To read the color code of a common 4 band 1K ohm resistor with a 5% tolerance, start at the opposite side of the GOLD tolerance band and read from left to right. Write down the corresponding number from the color chart below for the 1st color band (BROWN).
[DOC File]Worksheet - Resistor Color Codes
https://info.5y1.org/resistor-values-by-color_1_4ce99b.html
Resistor, 2200 (, 4700 (, 6800 (, 5%. Procedure. Individual resistors. 1.1 Nominal Resistance. Use the color code chart to select three 5% resistor with nominal values of 2200 ohms, 4700 ohms, and 6800 ohms. Calculate the resistor's tolerance (5%) and minimum and maximum resistance, and record in Table 1. TABLE 1: Nominal Resistance. All ...
Resistor color code | Resistor standards and codes | Resistor Guide
The purpose of this worksheet is to help review your understanding of resistor color codes. Given 10 different sets of color bands, determine the resistor values and tolerances. 1st Band 2nd Band 3rd Band 4th Band Value Tolerance Green Red Brown Silver Blue Gray Black Red Brown Orange Orange Gold ...
[DOC File]Lab1: Resistors
https://info.5y1.org/resistor-values-by-color_1_0253d0.html
RESISTOR COLOR CODE AND USE OF OHMMETER. Materials: Elvis, (5) resistors (assorted values), (1) 1 k potentiometer, length of wire Introduction: The National Instruments Educational Laboratory Virtual Instrumentation Suite (NT ELVIS) is a LabView and computer based design and prototyping environment.
[DOC File]Worksheet - Resistor Color Codes
https://info.5y1.org/resistor-values-by-color_1_cbc66f.html
Resistor Color CodesNAME _____. Given . the. different sets of color bands, determine . the resistor values and tolerances, including upper and lower limits. Be sure to state units
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.