Schedule 40 galvanized pipe specifications
[DOCX File]Section 23 22 13 - STEAM AND CONDENSATE HEATING PIPING
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_e211ff.html
Vent Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; ASTM A106/A106M Grade B, seamless; Schedule 40, galvanized. FITTINGS FOR STEEL PIPE 50 mm (2 inches) and Smaller: Screwed or welded.
[DOC File]Conduit Specifications Agreement
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_bb0de8.html
PVC schedule 40 conduit shall conform to NEMA TC-2 and NEMA TC-3 specifications. Galvanized steel should not be used for single phase primary cable. Sweep ells shall have a minimum radius of six times the conduit diameter with the exception of two-inch conduit, which shall …
[DOCX File]SECTION 32 31 13 - CHAIN LINK FENCES AND GATES
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_0ef171.html
Round Steel Pipe and Rail: ASTM F1043, Group IA Heavy Industrial Fence Framework, ASTM F1083 schedule 40 galvanized pipe. SPEC WRITER NOTE: Below sizes are examples only. ASTM F1043/F1083 Group IA Schedule 40 pipe size for Fence Fabric Height over 1.8 m to 2.4 m (6ft. to 8 ft.) is 60 to 100 mm (2.375 to 4 inches).
[DOC File]SECTION 15310
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_d77258.html
refer to pipe and fitting schedule at end of section to determine pipe materials and accessories required for particular applications, edit part 2 as required. part 2 products. 2.01 steel pipe and fittings. a. steel pipe for threading: standard weight, schedule 40, black or galvanized; astm a 53 or astm a 135. use paragraph above and/or below ...
[DOC File]SECTION 055000 - METAL FABRICATIONS
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_ce604f.html
Steel Sections: ASTM A992, hot-dip galvanized for exterior use. Steel Pipe: ASTM A53, Type S, Grade B, Schedule 40 typical unless otherwise noted. Pipe used for handrails and railings shall be [hot-dip galvanized after fabrication][powder coated] for exterior use, …
[DOC File]CSI Format Chain Link Fence Specification
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_47fc4b.html
Round steel pipe and rail: Schedule 40 standard weight pipe, in accordance with ASTM F1083, 1.8 oz/ ft² (550 g/m²) hot dip galvanized zinc exterior and 1.8 oz/ft² (550 g/m²) hot dip galvanized zinc interior coating.
[DOC File]CSI Format Chain Link Fence Specification
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_dcd46e.html
Round steel pipe and rail: Schedule 40 standard weight pipe, in accordance with ASTM F1083, 1.8 oz/ ft² (550 g/m²) hot dip galvanized zinc exterior and 1.8 oz/ft² (550 g/m²) hot dip galvanized zinc interior coating.
[DOC File]PipeLine Fitness Route Specifications
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_19263a.html
Except as noted, all pipe rails shall be schedule 40 steel pipe in accordance with ASTM A-53, Type E, Grade A. Thin wall tubing is not acceptable. Steel plate shall be in accordance with ASTM A-36. All steel parts shall be CASPAX-7( finished in accordance with Section 4.0. 3.1 Fabrication. All welds are to comply with AWS standard D1.1.
SECTION 323113 - CHAIN LINK FENCES AND GATES
Gate Frame: 1.9 inch (48.26 mm) outside diameter Schedule 40 galvanized steel pipe for fittings and truss rod fabrication. Fabric/Vinyl Coated Steel: Chain link fence fabric shall be galvanized steel wire with a continuously bonded vinyl coating, with a finish size (i.e., size after coating) of 8 gauge, and shall comply with ASTM F 668.
[DOC File]ARCAT spec 05710duv 2008-2-27
https://info.5y1.org/schedule-40-galvanized-pipe-specifications_1_4112a7.html
Center Support Pole: ASTM A 53/A 53M Schedule 40 galvanized steel pipe, 3 inches (76 mm) diameter. - See Dimension Table. Center Support Pole: 22A 6061-T6 Schedule 40 Aluminum pipe, IPS 3 1/2inches (88.9 mm) diameter.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.