Stainless steel 8 mirror finish
[DOC File]WINDOWS FROM COLD FORMED SECTIONS
https://info.5y1.org/stainless-steel-8-mirror-finish_1_f416ba.html
Finish: #4 Satin, #8 Mirror or Non directional graining, Medium or Dark Statuary Finish, Lacquered. Reinforcement: Stainless Steel 16 Gauge minimum. Frames: 11, 14 or 16 Gauge. Fasteners: Steel or Stainless steel anchors. Stile and Rail profiles or seamless . face as shown on drawings. Bottom rail height may be stipulated by . Code. D. Doors:
[DOCX File]SECTION 09 06 00, SCHEDULE FOR FINISHES
https://info.5y1.org/stainless-steel-8-mirror-finish_1_9d97b0.html
Finish Plans: these plans are a part of architectural drawing set as an adjunct to the finish schedule. Use for showing wall, ceiling and floor patterns and identifying stopping and starting points for finishes exterior elevations may be used to show locations of various finishes identified by finish code and materials.
[DOCX File]ARCAT, Inc.
https://info.5y1.org/stainless-steel-8-mirror-finish_1_3da481.html
ASTM A240 Type 304 stainless steel finish to be #2B. ASTM A240 Type 304 stainless steel finish to be #4 satin. Pattern to be RGM pattern as manufactured by Rigidized Metals Corporation, 658 Ohio Street, Buffalo NY 14203, (800) 836-2580. ** NOTE TO SPECIFIER ** Delete tubing diameter not required. Tubing diameter: 1.5 inches (38 mm).
[DOCX File]SECTION 05500 (05 50 00) - browardschools
https://info.5y1.org/stainless-steel-8-mirror-finish_1_b1c4fb.html
ASTM A479/A479M-Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels. ... Mirror Polished Finish: Number 8, mirror polish with preliminary directional polish lines removed. FACTORY APPLIED FINISHES - ALUMINUM.
[DOC File]Hollow Metal Doors and Frames
https://info.5y1.org/stainless-steel-8-mirror-finish_1_bf15dc.html
Standard Stainless Steel Finish: [#2B Mill Finish] [#4 Satin] [#6 Hairline] [#8 Mirror] [Colored]. OR . Custom Stainless Steel Finish: [Embossed] [Etched] [Patterned] [Non-directional] [Textured] [_____] Execution. INSTALLATION. Install components to manufacturer’s written instructions. Install stainless steel window frames to [CSDMA] [HMMA ...
SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS
Finish of Stainless steel – ornamental directional finish , #4 ( Satin finish) standard , #7 ( mirror finish) - optional. Protect mechanical finishes on exposed surfaces from damage by applying a strippable, temporary protective covering before shipping.
[DOC File]DIVISION 8 - DOORS AND WINDOWS
https://info.5y1.org/stainless-steel-8-mirror-finish_1_495bf9.html
6. Cladding (door wings and round drum only): shall be stainless steel or muntz metal (brass alloy) in #8 mirror finish or #4 brushed satin finish. C. DOOR WING CONSTRUCTION: 1. Corner block type with 3/16” steel backup plate construction, mechanically secured with minimum of four hardened steel screws.
[DOC File]Inpro
https://info.5y1.org/stainless-steel-8-mirror-finish_1_0325eb.html
A. Stainless Steel: No. 4 satin finish. B. Gold Titanium Stainless Steel: mirror finish. PART 3 - EXECUTION. 3.01 . EXAMINATION. A. Examine areas and conditions in which the kickplate systems will be installed. 1. Complete all finishing operations, including painting, before beginning installation of kickplate system materials.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.