Water line regulator valve: free download. On-line document store on 5y1.org

[DOCX File]Hunter Irrigation Sprinkler Systems | Hunter Industries
https://info.5y1.org/water-line-regulator-valve_1_3cb5cd.html
The kit shall feature a water tested 1” x ¾” inline valve. The kit shall feature a Senninger pressure regulator. The kit shall be available in 25 PSI or 40 PSI (1.7 or 2.8 bar; 170 or 280 kPa) regulator versions . The kit shall have a flow of 0.5 to 15 GPM (30 to 900 GPH) (2 to 55 l/min).
water valve regulator replacement

[DOCX File]beaverforkwater.com
https://info.5y1.org/water-line-regulator-valve_1_b4890f.html
Brass gate valve that connects to the brass nipple with a compression or female PVC fitting. 6” brass nipple that connects to the brass gate valve and regulator with a compression or female PVC fitting. Compression or female PVC fitting that connects to the regulator and water service line to the building. See example below
pressure regulator valve water

[DOC File]GSW WATER SOURCE HEAT PUMP SPECIFICATIONS
https://info.5y1.org/water-line-regulator-valve_1_414b18.html
d. Motorized water valve; slow acting, 24v, FPT connections. Hose Kit Assemblies: The following assemblies ship with the valves already assembled to the hose described: a. Supply and return hoses having ball valve with PT port. b. Supply hose having ball valve with PT port; return hose having automatic flow regulator valve with PT ports, and ...
water flow regulator valve

[DOC File]PFEIFFER PUBLIC WATER AUTHORITY - City Of Batesville
https://info.5y1.org/water-line-regulator-valve_1_e532dc.html
A cut off valve must be installed in the service line within on (1) to three (3) feet from the meter. When water main pressure exceeds 80 p.s.i., a pressure regulator shall be installed in the service line between the cut off valve and the structure and located in an accessible place.
home water pressure regulator valve

[DOC File]PRESSURE TEST RECORD
https://info.5y1.org/water-line-regulator-valve_1_528250.html
[SAMPLE – Edit to suit but capture all data required for ASME B31 compliance] TEST NUMBER: PROJECT NO.: PAGE 1 OF PROJECT NAME: TEST INFORMATION SYSTEM DESCRIPTION:
3 4 water regulator valve

[DOC File]Hunter Irrigation Sprinkler Systems | Hunter Industries
https://info.5y1.org/water-line-regulator-valve_1_a23092.html
This may be accomplished without removing the valve body from the line. The filter/regulator shall be a combination filter and pressure regulator assembly. The filter/regulator will be capable of operating between 20 - 120 PSI (1.4 - 8.8 bar; 140 - 800 kPa) with a flow range of between 0.5 - 15 GPM / 30 - 900 GPH (2 - 57 l/m / 120 - 3420 l/hr).
water line valve

[DOCX File]SECTION 22 05 23 - General-Duty Valves for Plumbing Piping
https://info.5y1.org/water-line-regulator-valve_1_a31426.html
Connections Valves and Strainers: Shut off valves shall be installed on each side of reducing valve and a bypass line equal in size to the regulator inlet pipe shall be installed with a normally closed globe valve. A strainer shall be installed on inlet side of, and same size as pressure reducing valve.
watts water regulator valve

[DOC File]CHAPTER6
https://info.5y1.org/water-line-regulator-valve_1_5a5781.html
False – the shutoff valve is considered the fullway valve downstream of the water meter. 12. A fullway valve shall be installed on the hot water discharge pipe from each water heater. True, since it controls hot water to the residence. True, since it would allow replaced on a single hot water faucet in a bathroom. False, since a halfway valve ...
water regulator valve

Water line regulator valve