Watts hot water mixing valve
[DOCX File]Watts Water
https://info.5y1.org/watts-hot-water-mixing-valve_1_3754d3.html
Group thermostatic mixing valve with double regulation finctioning according to a principle of servo-motor for mixed water distribution from 10° to 50°C. Maximum hot water temperature: 85°C. Differential hot water / mixed water: 10°C mini. …
Thermostatic Mixing Valves - Watts
Temperature control system shall be controlled digitally via integrated circuit board technology designed to deliver blended water economically at accurate temperature selected by user as safe and appropriate for sanitary use in facility’s recirculated hot water system. The mixing valve shall be an IntelliStation LFIS150 or LFIS200.
[DOCX File]Watts Water
https://info.5y1.org/watts-hot-water-mixing-valve_1_bcd3b0.html
Copy "Primary, Thermostatic, Water Mixing Valves" Paragraph below and re-edit for each type of water mixing valve required. If only one type is required, drawing designation may be omitted. Primary, thermostatic, water mixing valves in first paragraph below are available in NPS 3/4 to NPS 3 and maybe in NPS 4 (DN 20 to DN 80 and maybe in DN 100 ...
[DOCX File]INTELLISTATION ENGINEER SPEC SHEET WITH MG EDITS …
https://info.5y1.org/watts-hot-water-mixing-valve_1_7bbf1a.html
The thermostatic mixing valve is delivered with a “rising cover kit”: after removed the cartridge and put in place the rinsing cover kit, you can easily flush the valves with a disinfectant solution or with a water temperature up to 90°C without danger of damaging the thermostatic mechanism.
[DOC File]SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES
https://info.5y1.org/watts-hot-water-mixing-valve_1_a541ce.html
A. Adjust flush valves, pressure reducing valves, mixing valves, water heater thermostats, hot water circulating system balancing valves, and similar equipment. B. Remove construction protection, tags and labels and thoroughly clean all plumbing equipment and trim. Scour all fixtures just prior to building acceptance. END OF SECTION
[DOC File]wattswater.fr
https://info.5y1.org/watts-hot-water-mixing-valve_1_6117f6.html
anywhere needing a supply of water at a temperature pre-set on site. Scald protection: Rapid fail safe on either hot or cold water supply failure comply with EN1111 and EN1287. Broad range . for all applications constraints (21models) Standard range with set position temperature . MMV-C direct setting, 30/50°C or 35/60°C. Features and Benefits
[DOC File]Plumbing - MFIA Inc. Consulting Engineers
https://info.5y1.org/watts-hot-water-mixing-valve_1_dea44f.html
Install temperature-actuated water mixing valves with check stops or shutoff valves on inlets and with shutoff valve on outlet. Install thermometers and water regulators if specified. Install cabinet-type units recessed in or surface mounted on wall as specified.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.