Aluminum and stainless steel contact
[DOCX File]SECTION 07411 STANDING-SEAM METAL ROOF PANELS
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_0acbb9.html
24. ga. steel or 0.032" 18” Aluminum panels with stainless steel clips spaced a maximum of 45-0" o.c. installed over 22 ga. metal deck and up to 6" of rigid insulation and bearing plates to support clips.
[DOC File]SECTION 08520 - ALUMINUM WINDOWS
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_ad2696.html
2.7.3.1 Supply, return and fresh air ducts which requires insulation shall have exterior wrapped duct insulation (interior duct lining is not allowed). Outdoor insulated ductwork shall have protective jackets applied on all surfaces. Jacket material can be aluminum, stainless steel, painted galvanized steel, PVC or approved equal by the State.
SECTION 05521 – ALUMINUM HANDRAIL AND RAILINGS
Glass or resin panels to be secured to the post using Hollaender 644-8 two piece glass panel clips. 644-8 clips will be manufactured from 304 stainless steel alloy and secured to the rails using tubular rivet nuts, size 5/16 – 18 UNC, and stainless steel socket head cap screws..
[DOCX File]Perforated Metal Panels - Steel Gates | Aluminum Fence
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_73252e.html
A.Material: [ASTM B209, Alloy 6063, Temper T-6 aluminum] [ASTM B248 brass] [ASTM B370 copper] [ASTM A653 galvanized steel] [ASTM B122 monel nickel-copper alloy] [ASTM B248 muntz copper-zinc alloy, ] [ASTM A167, Type 304 stainless steel.] [ASTM A283 steel] plates and sheets.
[DOC File]300 Series Stainless Tig Welding
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_a9a127.html
Unlike aluminum, however, austenitic stainless steel does not require wire brushing prior to welding. Instead, the material should be wire brushed between welding passes with a stainless steel wire brush that has not had contact with steel to help remove potential interpass oxides.
[DOCX File]SECTION 08 90 00 - LOUVERS AND VENTS
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_3fe646.html
Stainless-steel sheet for stainless-steel louvers, not less than 0.95 mm (0.038 inch) minimum. Insulated laminated panels consisting of an insulating core surfaced on back and front with metal sheets and attached to back of louver with clips on screws and gasketed or sealant sealed perimeter.
[DOCX File]SECTION 07 95 13 - EXPANSION JOINT COVER ASSEMBLIES
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_14aeac.html
2. Do not use aluminum, brass, or bronze for joints exceeding 100 mm (4 inches) wide, when wheel loads exceed 136 kg (300 lbs.), and for seismic joints. 3. Use stainless steel for seismic joints and joints exceeding 100 mm (4 inches) wide. 4.
[DOCX File]SECTION 054043
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_babdea.html
Submit color matched exterior stainless-steel fasteners for each color specified. If special fastening is selected by architect provide color matched fastener for each panel color specified. ... [Aluminum][Stainless Steel] , Vented [V] or ... Utilize tapes and other isolation methods as necessary to separate and prevent contact between ...
[DOCX File]Stainless Steel Louver Fences and Gates - Aluminum Gates
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_960697.html
A.Type: Ornamental fencing system consisting of fixed louver modular fence panels fabricated with formed stainless steel louvers and flat stainless steel bars welded to back of louvers and supported by stainless steel fence posts and stainless steel louver gates and gate hardware; [Eclipse] [Total Eclipse] Stainless Steel Fixed Louver Fencing as manufactured by Ametco Manufacturing Corporation.
[DOC File]SECTION 11000 - Waterman Valve LLC
https://info.5y1.org/aluminum-and-stainless-steel-contact_1_5e6f2d.html
Finish: Mill finish on aluminum and stainless steel. All aluminum in contact with concrete shall be field coated by the CONTRACTOR with a heavy coat of bitumastic paint. Welds on aluminum shall be cleaned to provide a uniform finish. Welds on stainless steel shall be passivated to …
Nearby & related entries:
- aluminum and galvanized steel compatibility
- aluminum and stainless steel contact
- aluminum and stainless steel corrosion
- aluminum vs stainless steel props
- aluminum free stainless steel cookware
- difference between aluminum and stainless steel
- aluminum and stainless new orleans
- aluminum and stainless galvanic corrosion
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.