ࡱ> 7  bjbjUU y+7|7|Âhl$$$$$$$tMMMN\N OPPPPVVV;ԫt$ 91$VUV^VV[$$PP<ɳ[[[V$pP$P[V[[a $PO [765MW|ۥ߳0sAXA[$$$$CHAPTER 12 Activity-Based Costing LEARNING OBJECTIVES After studying this chapter, you should be able to: 1. Discuss the limitations of using only unit-based drivers to assign costs. 2. Provide a detailed description of activity-based product costing. 3. Describe how homogeneous cost pools can be used to reduce the number of activity rates. 4. Describe activity-based system concepts including an ABC relational database and ABC software. chapter summary This chapter explains how activity-based costing systems produce more accurate product cost information than traditional costing systems that use unit-based drivers. Potential users of ABC systems are those companies that produce multiple products, have high degree of product diversity, and have a significant percentage of nonunit-level overhead costs. This chapter also outlines the essential steps in designing an ABC system in order for it to be implemented successfully. The chapter concludes by describing an ABC relational database and ABC software. CHAPTER REVIEW I. Unit-Based Product Costing A. Functional-based costing uses only unit-based drivers to assign overhead costs to products. a. Functional-based costing first assigns overhead costs to a functional unit, creating plant or departmental cost pools. Next, these pooled costs are assigned to products using only unit-based drivers. b. Unit-based drivers are factors that cause changes in cost as the units produced change. Functional-based costing uses only unit-based drivers because it assumes that overhead consumed by products is highly correlated with the units produced. Review textbook Exhibit 12-1, which provides a model of the functional-based product costing system. B. Plantwide and Departmental Rates 1. Both plantwide rates and departmental rates are used to assign overhead costs to products using unit-based cost drivers. 2. A plantwide rate uses a single cost pool for the entire plant. 3. Departmental rates use separate cost pools for the different departments. Review textbook Exhibits 12-3 and 12-4, which show product unit cost computations using plantwide rates and departmental rates, respectively. C. The Failure of Plantwide and Departmental Rates Using plantwide or departmental rates to assign overhead costs will produce inaccurate product costs when: 1. The proportion of nonunit-related overhead costs to total overhead costs is large (e.g., reaching more than 40 or 50 percent of the total). a. Using only unit-based activity drivers to assign nonunit-based costs can create cost distortions. Nonunit-related overhead costs refer to those costs that are unrelated to the number of units produced but more logically relate to nonunit-based drivers. Nonunit-based drivers are factors, other than the number of units produced, that measure the demands that cost objects place on activities. c. Examples: (1) Setup costs relate to the number of batches of products produced. (2) Product engineering costs depend on the number of different engineering work orders. (3) Material-moving costs relate to the number of moves required, not to the number of units produced. 2. The degree of product diversity is great. a. Product diversity means that products consume overhead activities in different proportions because of their differences in product size, product complexity, setup time, and size of batches. The consumption ratio measures the proportion of each activity consumed by a product. D. Potential users of ABC systems can be identified when these companies: 1. Produce multiple products, 2. Have a high degree of product diversity, and Have a significant percentage of nonunit-level overhead in production costs. Review textbook Exhibit 12-5, which provides examples of consumption ratios of various activities by different products. Note that the special product (scented cards) uses more setup and material-moving activities.  II. Activity-Based Costing System A. An activity-based costing (ABC) system first assigns costs to activities and then traces costs from activities to products. ABC assumes that activities consume resources, and products and other cost objects consume activities. ABC cost assignment is made possible through the identification of activities, their costs, and the use of cost drivers. Thus, it better reflects the pattern of overhead consumption and is more accurate than functional-based costing. Review textbook Exhibit 12-8, which provides an activity-based costing model. B. Six essential steps in designing an ABC system include: Step 1: Identify, define, and classify activities and key attributes. Step 2: Assign the cost of resources to activities. Step 3: Assign the cost of secondary activities to primary activities. Step 4: Identify cost objects and specify the amount of each activity consumed by specific cost objects. Step 5: Calculate primary activity rates. Step 6: Assign activity costs to cost objects. Step 1: Identify, define, and classify activities and key attributes. 1. To identify an activity means to describe the work performed by people or equipment. a. Use an action verb and an object that receives the action to name the activity. b. An activity inventory is a list of the activities that are performed within the organization. Review textbook Exhibit 12-10, which provides a sample activity inventory for an electronics manufacturer. 2. To define an activity means to use activity attributes to describe it. Activity attributes are nonfinancial and financial information items that describe individual activities (for example, description of the tasks that make up the activity, resources consumed by the activity, amount or percentage of time spent on the activity, the cost objects, and the activity driver.) An activity dictionary lists the activities in an organization along with desired attributes. 3. To classify an activity means to recognize the difference between it and other activities for different purposes. a. For product costing purposes, activities can be classified as primary or secondary. (1) A primary activity is consumed by a final cost object (e.g., a product or customer). (2) A secondary activity is consumed by intermediate cost objects (e.g., primary activities, materials, or other secondary activities). b. Many other useful activity classifications exist. For example, activities can be classified as value-added or nonvalue-added, as quality-related or environmental-related. 4. Methods to be used to gather activity information include interviews, surveys, and observations. Review textbook Exhibit 12-11, which provides an example of an activity dictionary. Note that the activity dictionary names the activity, describes the tasks that make up the activity, classifies the activity as primary or secondary, lists the cost object(s), and identifies the activity driver. Step 2: Assign the cost of resources to activities. 1. Costs may be assigned to activities using: a. Direct tracing, when resources are exclusive to the activity. b. Driver tracing, when resources are shared by several activities. 2. Resource drivers are the factors that measure the consumption of resources by activities. a. Resource driver data can be collected using interviews, survey forms, questionnaires, and timekeeping systems. b. A work distribution matrix helps identify the amount of labor consumed by each activity. It is a means of collecting the data required to assign labor resource costs to activities. Step 3: Assign the cost of secondary activities to primary activities. If there are secondary activities, then the costs of those must be assigned to the primary activities. Review textbook Exhibit 12-13, which provides an example of the cost of a secondary activity (supervising nurses) being reassigned to the primary activities. Compare the costs of the primary activities after the reassignment (Exhibit 12-13) with those before the reassignment (Exhibit 12-12). Step 4: Identify cost objects and specify the amount of each activity consumed by specific cost objects. 1. Costs can be assigned to products or other cost objects in proportion to their usage of the activity by: a. Identifying the cost objects. b. Measuring the demand that cost objects place on the activities. 2. Activity drivers measure the demands that cost objects place on activities. 3. Most ABC system designs choose between two types of activity drivers: a. Transaction drivers measure the number of times an activity is performed. Examples: Number of treatments, number of requests b. Duration drivers measure the time it takes to perform an activity. Duration drivers should be used when the time required to perform an activity varies from transaction to transaction. Examples: Hours of hygienic care, monitoring hours 4. A bill of activities can be created to specify the product, expected product quantity, activities, and amount of each activity expected to be consumed by each product. Review textbook Exhibit 12-14, which provides an example of a bill of activity for a cardiology ward. It includes activities, activity drivers, and types of services that consume activities. Step 5: Calculate primary activity rates. Primary activity rates are computed by dividing the budgeted activity costs by practical activity capacity. Step 6: Assign activity costs to cost objects. Using the primary activity rates, costs are assigned to the cost objects. Review textbook Exhibit 12-15, which illustrates the final assignment of costs to cost objects. C. Materials as an Intermediate Cost Object 1. Material-related activities, such as purchasing, inspecting, and moving materials, are secondary activities because they are not directly consumed by the final cost objects. 2. The cost of material-related secondary activities will be first assigned to materials (an intermediate cost object) and then to the final cost objects through direct tracing.  III. Homogeneous Pools of Activities In the final stage of ABC, homogeneous cost pools can be used to reduce the number of activity rates because fewer rates may Produce more readable and manageable product cost reports. Reduce the perceived complexity of an ABC system and increase its likelihood of managerial acceptance. Increase the accuracy of cost assignments. A. Activity Classification: The Key for Reducing the Number of Rates 1. Activities can be grouped in homogeneous sets if a. They are logically related, and b. They have the same consumption ratios for all products. 2. A homogenous cost pool is the collection of overhead costs associated with a set of activities that has the same process, the same activity level, and can use the same driver to assign cost to products. The pool rate is the cost per unit of the chosen activity driver that can be computed as: Pool rate =  EMBED Equation.3  3. Attributes that are useful for grouping activities into homogeneous cost pools include process, activity-level, and activity-driver classifications. a. Using process classification to create homogeneous cost pools. A process is a series of activities that are linked to perform a specific objective. The key to grouping activities is the notion of sharing a common objective or purpose. Example: The procurement process common objective is to obtain parts for production. Activities that can be linked together include purchasing, receiving, and paying suppliers. Review textbook Exhibit 12-17, which illustrates process classification. b. Using activity-level classification to create homogeneous cost pools. Activities can be grouped together if they are performed at the same general activity level (same activity-level attribute). Classifying activities by the activity level helps management identify the appropriate activity drivers because the costs of activities associated with the different levels respond to different types of activity drivers. Four general activity categories include: Unit-level activities are those that are performed each time a unit is produced. Batch-level activities are those that are performed each time a batch is produced. Examples: Setup, inspections (if done by sampling units from a batch), purchasing, material handling Product-level activities are those performed that enable the various products of a company to be produced. Examples: Engineering changes to products, developing product-testing procedures, introducing new products, expediting goods Facility-level activities are those that sustain a factory s general manufacturing processes. Examples: Providing facilities, maintaining grounds, providing plant security Review textbook Exhibit 12-18, which illustrates activity-level classification. c. Using activity-driver classification to create homogeneous cost pools. The unit-level, batch-level, and product-level activities can be grouped together if they have the same consumption ratio and share the same activity driver. Facility-level activities do not undergo the driver classification because they are common to a variety of products. Review textbook Exhibit 12-19, which illustrates activity driver classification and the formation of homogeneous cost pools. B. Comparison with Functional-Based Costing 1. In a functional-based system, the consumption of overhead is assumed to be explained only by unit-level activity drivers. This may not reflect the activities actually being consumed by the products. Many of the costs being assigned in the functional-based fixed overhead category are really batch-level, product-level, and facility-level costs that vary with drivers other than unit-based drivers. 2. ABC systems recognize nonunit-based drivers and by better tracing costs to individual products will: Improve product costing accuracy and decision making. Allow managers to exert more control over the activities that cause the costs. Allow managers to identify which of the activities add value and which do not.  IV. ABC System Concepts Advances in information technology facilitate the development of an ABC database and ERP systems. A. An ABC database is the collected data sets that are organized and interrelated for use by an organizations activity-based costing information system. A data set is a grouping of logically related data. 1. Creating an ABC database involves the following steps: a. Define and model the entities that are involved in ABC. b. Develop a conceptual view of the entities and the logical relationships between the entities. c. Identify the attributes associated with each entity. d. Select a model that reflects the data structure implied by the entities and attributes, such as relational structure. A relational structure uses a table to represent the overall logical view within a database. ABC software typically uses a relational structure for data. 2. Activity relational table in an ABC database a. The activity relational table provides important information to form homogeneous cost pools and calculate pool rates. b. Each activity is identified by an activity number, which serves as the unique primary key. A primary key is the attribute that uniquely identifies each row of data in the table, i.e., a record. Review textbook Exhibit 12-20, which provides an example of an activity relational table. 3. Product relational table in an ABC database a. The product relational table is used to assign costs to products based on the activity demands specified in the table. b. The product number or name that uniquely identifies each product is used as the primary key. c. The use of concatenated keys helps assign costs to individual products. Concatenated keys are two or more keys that uniquely identify a record. Example: The product number and activity driver number are both used to assign costs to individual products. Review textbook Exhibit 12-22, which provides an example of a product relational table. B. ABC and ERP Systems 1. ABC software selection is very important because: It should have the features that correlate with the functional capabilities of a firms ABC system design. It should have at least three distinct modules: resources, activities, and cost objects. 2. ABC software selection must consider the firms ERP systems because ABC and ERP should be integrated so that they can exchange vital information. a. ERP systems are a major source of data for the ABC model by providing much of the input data, including resource drivers, activity drivers, and resource costs. b. ABC supports the ERP system as the operational control system by: Supplying accurate costs for products, customers, activities, and processes. Sending signals for directing continuous improvement efforts. Providing key information to support tactical and strategic decisions. KEY TERMS TEST From the list that follows, select the term that best completes each statement and write it in the space provided. ABC database activity attributes activity dictionary activity drivers activity inventory activity-based costing system batch-level activities bill of activities concatenated keys consumption ratio data set duration drivers facility-level activities homogeneous cost pool nonunit-based drivers pool rate primary activity primary key process product diversity product-level activities relational structure resource drivers secondary activity transaction drivers unit-based drivers unit-level activities 1. The costing system that first traces costs to activities and then traces costs from activities to products is a(n) ____________________________________________. 2. ___________________________ provide descriptive labels for individual activities. 3. ____________________________________ are performed each time a batch is produced; ____________________________________ are performed to enable the production of each different type of product. 4. __________________________________ are factors that cause changes in cost as the units produced change; __________________________________ are factors other than the number of units produced. 5. The listing of the activities performed within the organization is the ____________ _______________. 6. Factors that measure the demand placed on overhead activities by individual products are called ________________________. 7. The data structure that uses a table to represent the logical connections of a database is called a(n) ______________________________. 8. The proportion of an overhead activity consumed by a product is the ____________________ ________. 9. A(n) ______________ is a grouping of logically related data. 10. Activities that are performed each time a unit is produced are __________________. 11. A(n) ___________ is a series of activities that are linked to perform a specific objective. 12. If the collection of overhead costs associated with activities has the same process, the same level, and can use the same driver to assign costs to products, it is a(n) ________ _____________________________________. 13. When products consume overhead in different proportions, there is _____________ _____________. 14. The collected data sets that are organized and interrelated for use by an organization s activity-based costing information system is the _________________________. 15. The homogeneous pool costs divided by the activity drivers practical capacity is the ________________. 16. ____________________________ sustain a facilitys general manufacturing process. 17. The attribute that uniquely identifies each row of data in a table is the ____________________ ________; two or more needed to uniquely identify a record are ____________________ ________. MULTIPLE-CHOICE QUIZ Complete each of the following statements by circling the letter of the best answer. 1. The activities that are performed each time a batch is produced are: a. batch-level activities. b. facility-level activities. c. process-level activities. d. product-level activities. e. unit-level activities. 2. In a functional-based cost accounting system, which of the following activity drivers is used to assign fixed overhead costs to products? a. batch-level activities b. facility-level activities c. process-level activities d. product-level activities e. unit-level activities 3. In a pure ABC system, which of the following would not be assigned to products? a. batch-level activities b. facility-level activities c. process-level activities d. product-level activities e. unit-level activities 4. Which of the following would be classified as a product-level activity? a. plant management b. production scheduling c. engineering changes d. material handling e. machine hours 5. Which of the following would be classified as a batch-level activity? a. plant management b. process engineering c. engineering changes d. material handling e. machine hours 6. Which of the following is a true statement? a. If nonunit-based overhead costs are a large proportion of overhead costs, the use of nonunit-based drivers will cause large distortions in product costs. b. If nonunit-based overhead costs are a small proportion of overhead costs, the use of nonunit-based drivers will cause large distortions in product costs. c. Nonunit-based activity drivers are factors that are proportional to the number of units produced. d. If products consume the nonunit overhead activities in the same proportion as unit overhead activities, using a traditional overhead assignment method will cause costs to be distorted. e. If products consume the nonunit overhead activities in the same proportion as unit overhead activities, using a traditional overhead assignment method will not cause costs to be distorted. 7. Consumption ratios are: a. the activities performed every time a batch is produced. b. the proportion of each activity consumed by a product. c. necessary for unit-level activities but not for batch- or product-level activities. d. factors that cause costs to change as the level of activities change. e. none of the above. 8. An activity-based costing system is one that: a. traces costs to activities and then to products. b. traces costs to resources and then to activities. c. traces activities to costs and then to resources. d. traces products to activities and then to resources. e. uses a single plantwide rate for allocating overhead costs to products. 9. A homogeneous cost pool is one that: a. does not change over time. b. needs many activity drivers to be allocated to a cost object. c. has only one type of material assigned to it. d. can be explained with a single activity driver. e. can be used only by the dairy industry. 10. Which of the following statements is incorrect regarding ABC and service industries? a. Since service organizations do not have inventories, product costing (and thus ABC) will not be necessary. b. The output is more easily defined for a service organization than for a manufacturing organization. c. Activities in a service organization tend to be more standardized than activities in a manufacturing organization. d. Since the output of a service organization is consumed when produced, there will be no batch-level activities. e. None of the above statements are correct. 11. Inspection of the first unit produced is what type of activity? a. batch-level b. facility-level c. process-level d. product-level e. unit-level 12. Extruding plastic parts is what type of activity? a. batch-level b. facility-level c. process-level d. product-level e. unit-level PRACTICE TEST EXERCISE 1 XYZ Company has identified the following overhead activities, costs, and activity drivers for the coming year: Activity Expected Cost Activity Driver Activity Capacity Material-handling costs $45,000 Number of moves 450 Machine costs 80,000 Machine hours 20,000 Order costs 15,000 Number of orders 750 Receiving costs 30,000 Number of parts 50,000 Setup costs 50,000 Number of setups 250 Assume that each activity corresponds to a process. XYZs normal activity is 5,000 direct labor hours. The following two jobs were completed during March: Job X-1 Job Y-4 Direct materials $1,500 $2,000 Direct labor ($15 per hour) $750 $750 Units completed 200 200 Number of moves 3 6 Machine hours 125 75 Number of orders 3 12 Number of parts 200 800 Number of setups 1 4 Required: 1. Determine the unit cost for each job using direct labor hours to apply overhead. EXERCISE 1 (Continued) 2. Determine the unit cost for each job using the activity drivers to apply overhead. 3. Which method produces the more accurate cost assignment? Why? EXERCISE 2 Required: Classify the following activities as unit-level, batch-level, product-level, or facility-level. 1. Marketing a product 2. Paying rent 3. Drilling a hole 4. Lighting the factory 5. Running the machines 6. Moving a batch 7. Engineering a product 8. Inspecting a machined part when it is completed 9. Ordering a purchased part 10. Setting up a machine 11. Using janitorial services 12. Paying insuranceEXERCISE 3 Acme Enterprises is a custom manufacturer of specialty circuit boards. The boards are produced in batches in a single manufacturing facility. Each board requires an engineer to prepare the specifications and schematic drawings. Once this design is complete, the equipment is set up for the batch production. As each batch is completed, a sample of the units is inspected for quality and tolerances. Costs have been assigned as follows: Engineering $75,000 Setups 60,000 Labor 50,000 Inspection 75,000 Factory lease 30,000 Factory utilities 12,000 The following activity drivers have been identified and their capacities determined: Activity Driver Practical Capacity Labor hours 5,000 Setup hours 2,000 Engineering hours 2,500 Inspection hours 6,000 Machine hours 10,000 The cost of the facility-level activities are assigned using machine hours. EXERCISE 3 (Continued) Required: 1. Identify each activity as unit-level, batch-level, product-level, or facility-level. 2. Create homogeneous cost pools. Identify the activities that belong to each pool and the activity driver that will be used for computing pool rates. (Use machine hours as the activity driver for the factory lease and factory utilities cost pools.) 3. Compute the pool rate for each pool you have identified in Requirement 2. EXERCISE 4 Alcatraz Company makes two models of an antitheft device. The portable model is relatively small and is primarily for use in automobiles. The standard model is much larger and is designed for houses and buildings. The Fabricating Department cuts, bends, and welds sheet metal to produce the external box of the device. The box is also painted in this department. The Assembly Department uses purchased parts to produce the internal workings and fits them into the prepared metal boxes. Alcatraz has conducted a special study to determine if an activity-based costing system would be beneficial in determining the costs of the two products. The Fabricating Department is a more complex department than the Assembly Department and has been chosen for a pilot test of an ABC system. The following activities have been identified, along with their associated costs: Depreciation $250,000 Factory lease 125,000 Inspection 75,000 Factory maintenance 150,000 Materials handling 100,000 Power 50,000 Product engineering changes 25,000 Setups 125,000 Department manager salaries 60,000 The analysts have identified the following potential activity drivers and the capacity of each: Portable Standard Direct labor ($10 per hour) $75,000 $90,000 Machine hours 4,000 6,000 Materials $450,000 $650,000 Number of moves 1,500 1,500 Number of products 1 1 Number of setups 150 350 Units produced 15,000 17,500 Required: 1. Classify each activity according to activity level and identify an appropriate driver for each. EXERCISE 4 (Continued) 2. Create homogeneous cost pools and calculate pool rates. (Use the number of setups as the activity driver for both inspection and setups costs. Machine hours serve as the activity driver for depreciation, factory lease, factory maintenance, and department manager salaries.) 3. Use the pool rates to compute per unit overhead costs for the two products. CAN YOU? CHECKLIST Can you explain why functional-based costing systems may produce distorted costs? Can you explain why departmental rates, although better than plantwide rates, may still be inadequate? Can you explain how product diversity can affect overhead costs? Can you identify the signals that may indicate that functional-based costing is no longer working? Can you describe how an activity-based cost accounting system works? What are its features? Can you describe the differences between the various classifications or levels of activities and give several examples of each? Can you describe how a firms ABC and ERP systems should be integrated and supportive of each other by exchanging vital information? ANSWERS KEY TERMS TEST 1. activity-based costing system 2. Activity attributes 3. Batch-level activities, product-level activities 4. Unit-based drivers, nonunit-based drivers 5. activity inventory 6. activity drivers 7. relational structure 8. consumption ratio 9. data set 10. unit-level activities 11. process 12. homogeneous cost pool 13. product diversity 14. ABC database 15. pool rate 16. Facility-level activities 17. primary key, concatenated keys MULTIPLE-CHOICE QUIZ 1. a 2. e 3. b 4. c 5. d 6. e 7. b 8. a 9. d 10. e 11. a 12. e PRACTICE TEST Exercise 1 (XYZ Company) 1. Total overhead = $45,000 + $80,000 + $15,000 + $30,000 + $50,000 = $220,000 / 5,000 DL hours = $44 per DL hour Job X-1 Job Y-4 Materials $1,500 $2,000 Labor 750 750 Overhead  2,200 (50 $44)  2,200 (50 $44) Total $4,450 $4,950 Divided by units  200  200 Per unit $22.25 $24.75 2. Materials handling $45,000 / 450 = $100 per move Machine time $80,000 / 20,000 = $4 per machine hour Ordering $15,000 / 750 = $20 per order Receiving $30,000 / 50,000 = $0.60 per part Setup $50,000 / 250 = $200 per setup Job X-1 Job Y-4 Materials $1,500 $2,000 Direct labor 750 750 Moves 300 (3 $100) 600 (6 $100) Machine 500 (125 $4) 300 (75 $4) Orders 60 (3 $20) 240 (12 $20) Parts 120 (200 $0.60) 480 (800 $0.60) Setups   200 (1 $200)   800 (4 $200) Total $3,430 $5,170 Divided by units  200  200 Per unit $17.15 $25.85 3. Costs determined using the activity drivers are more accurate. The consumption ratios of the resources differ greatly between the two products. The direct labor approach to apply overhead implicitly assumes the two products consume the overhead resources in the same pattern as direct labor (50%-50%). Exercise 2 (Activity Classifications) 1. Marketing a productproduct-level 2. Paying rentfacility-level 3. Drilling a holeunit-level 4. Lighting the factoryfacility-level 5. Running the machinesunit-level 6. Moving a batchbatch-level 7. Engineering a productproduct-level 8. Inspecting a machined part when it is completedunit-level 9. Ordering a purchased partbatch-level 10. Setting up a machinebatch-level 11. Using janitorial servicesfacility-level 12. Paying insurancefacility-levelExercise 3 (Acme Enterprises) 1. Engineering Batch-level Setups Batch-level Labor Unit-level Inspection Batch-level Factory lease Facility-level Factory utilities Facility-level 2. 3. At most, there will be five cost pools. It is possible that the three batch-level activities could be combined into a single pool. If this were the case, the driver could be setup hours, engineering hours, or inspection hours. Pool Activity Driver Rate 1 Engineering Engineering hours $30.00 ($75,000 / 2,500) 2 Setups Setup hours 30.00 ($60,000 / 2,000) 3 Inspection Inspection hours 12.50 ($75,000 / 6,000) 4 Labor Labor hours 10.00 ($50,000 / 5,000) 5 Lease and utilities Machine hours 4.20 [($30,000 + $12,000) / 10,000] Exercise 4 (Alcatraz Company) 1. Activity Level Driver Depreciation Facility Machine hours Factory lease Facility Machine hours Inspection Batch Number of setups Factory maintenance Facility Machine hours Materials handling Batch Number of moves Power Unit Machine hours Product engineering changes Product Number of products Setups Batch Number of setups Department manager salaries Facility Machine hours 2. Pool Activities Costs Driver Quantity Rate 1 Inspection $ 75,000 Setups  125,000 $200,000 Number of setups 500 $400.00 2 Materials handling $100,000 Number of moves 3,000 $33.33 3 Product engineering changes $ 25,000 Number of products 2 $12,500.00 4 Depreciation $250,000 Factory lease 125,000 Factory maintenance 150,000 Power 50,000 Department manager salaries   60,000 $635,000 Machine hours 10,000 $63.50 3. Pool Portable Standard Setups $ 60,000 (150 $400) $140,000 (350 $400) Moves 50,000* (1,500 $33.33) 50,000* (1,500 $33.33) Products 12,500 (1 $12,500) 12,500 (1 $12,500) Machine hours  254,000 (4,000 $63.50)  381,000 (6,000 $63.50) Total $376,500 $583,500 Divided by units  15,000  17,500 Per unit $ 25.10 $ 33.34 *rounded  PAGE 246 Chapter 12 Activity-Based Costing  PAGE 247  PAGE 245  PAGE 256 Chapter 12 Activity-Based Costing  PAGE 255  PAGE 265 Activity-Based Costing  PAGE 265  PAGE 266 Chapter 12 Activity-Based Costing  PAGE 267  PAGE 237 Learning Objective #4 Learning Objective #3 Learning Objective #2 Learning Objective #1 kmXZ, - T g ? @ K{gx %):{cd(,<޽5\@NH jU@NHjUmHnHuCJ5@@\@@5@jCJUmHnHuNH5I "#7kX&'Q G M k 8$5^78O;.A&D  $1w7d%{bd;$d &dN PO8$ & Fg8$9 & FMJ59 & FL97=S-sW~.K0Z3dd9997998$999 ` @` @^` `@78^87 & FL  ^`7^WX3FSTY^`p> ^!`!!!""#F$$$%%K&L&M'(((((,).)5*E*e*f***,,Z,z,r-t---..0.R.S.r.00,1.1225@ j@U5 jU@NH5@@5@@@NH@5\NHNZ;N!!,"m""##r$%%M'())2***+T,,597=8899dd799999J99,-../F01|12h22E3334!444@5k5T667z78839 3 ^?;O=8dd7522;3=3>3H33333!4{4|446677778g8888888999 9]9^999d:f:r::: ; ;0;2;;<<<<<== ===X>m>>>@@@@@@ j@U@NH@ jEHU%j`d; 5OJQJUVmHnHujUmHnHu5 jU@NHjCJUmHnHu@NH@@NHA8 999r: ;B<<<Q=.>X>>>@ABDCC@D L    ^ L  $ $ ^$ ML9 & FO  7 ^ 9 & FN @ 7 ^7 @AABBCCDCVCXCCCwDxDDDJF~FFF)H*HIIIIII0J8JKKKL@LALLLMMMMOOPPPP^R_RRRRRWWWWWWWX@XCXXXY;Y[Y^YYYZ"ZZZZZ@@NH@ B*ph5\@jCJUmHnHu@NH@NHNH\\5 jUM@DD(EEFGFFGGAHwHHII1I2II.JbJJJ9KqKK8$47 8@8^8`?;O3789 & FP7^KGLLL.MMMMN}NNWOOOPzQQ RtRRbScSTKTTT59^378^xx7^8M & Fn pp^pTUUU U/UUUUUUUUUV2VEVWViVrVVVVVVVVV,-) @&3 & F^5V W#W8WIW\WpWWWWW@XX[YZZ[[[9\\\P^_6```]H]H-,Z[ [ [d[[[[[[[9\=\\\\\U]]^^P^X^_ _"__6`:````````Gadaeagaa%b(bnbqbbbbbbbbbccccccccccddddTdVdWdqdtddddddddddeJeMe_ebeye|e6@6@NH\\@ jU@@@5W`aa%bnbbbbbcccccddqddddddJe_eyeeee02/0)@& |eeeeeeeffff0f3fHfKf^fafpfsfffffffffg>gAgBggggggg7hBhEhFhhhhiiZiiiiijjTjWjjjjj kk?kBktkwkkkkkllelhlllllll!m$mUmXmmmmmmmmm7n@@@@NH@6@65[eff0fHf^fpff>ggBhhiijTjjj k?ktkkklellll!m2/0!mUmmmJnn*ooop"p5pGpYphpppppppqqqqq D P X# F 8" 0/7nJnMnNnnnnnn*o-o.oooooopp"p%p5p8pGpJpYp\phplpppppppppppqqqrrJtPtu u uu"u(uuuvvvvvvvvvvww,w/wHwKw~wwwwwwwwxy|||||.|4|||} 6;CJ6CJ jU@@NH@5XqrDrtrr9sJsjssssss t6tJtt"uu*v5v((#(@&+@& G P@ D P@F 8 G P X# D P X#5v?vvvvvvvvvv_H_Xi$$If<0%04 <a<$ CPP$If^`a$ %ZPP$If^`) vvvvvwww*w+w,wFwleleTep$ CPP$If^`a$ %ZPP$If^`i$$If<0%04 <a< FwGwHw|w}w~wwwwwww{e{e{pe{ %ZPP$If^`i$$If<0%04 <a<$ CPP$If^`a$ wwwwwwwwyye`ea_S E Pd'i$$If<0%04 <a<$ CPP$If^`a$ %ZPP$If^` yyyy z'z|zzzzzz {X{|.||k~~~"9 E Pd)(@&F  G Pd D Pd}}k~n~% klǁ|~adtuwx֋ً 9<PSeh~Ɍ͌  ;?`uy| 5mH sH mH sH \ 6;CJ6CJ jU@@NH@@5NHR9Pc΂ނbuBxPha(@&+@& G Pd D PdF  G Pd D Pdaƈ#֋ 9Pe~Ɍ  $ ZZ^` !@&D  ;_`uv|Ѝ&Z B p@ dB  <$@&!""$#&&&(*268:BXdhtv|- $(0ʔ֔ڔؖL`b36\_ 5mH sH :CJEHmH sH mH sH @NH>*>* j>*U@ :CJEHj:CJEHU5MZz֏DvH-G^͒HtL%$a$B   B ` xh ` xh@ B p@ dȗ'23L[\u}}}}i$$If<00p04 <a<B(($If^ (($Ifɘʘ (45O}}}}B(($If^ (($Ifi$$If<00p04 <a<ʘ͘ 59\`(.r~͝(*\zơ̡ܡ&`*,:Ʀʦ̦Φڦ&(460J@ j0J@U j>*U>*>* j>*U jU 5mH sH :CJEHmH sH mH sH  :CJEHj:CJEHU5EO[\{(b}}xohh ` P J  ` P J<#$ (($Ifi$$If<00p04 <a<B(($If^ *r#Y͝(\2ڟ B  X DH A<^`#hB d `^B Xx^X$ DXB@X^X`a$ ` P J zzȡ Gۢ`B p0 p$K^K D AA^`B "^B "^ DH!AAA^` B  Xpإ^ܦ&VX:<XZب& B p0 p$B p $K^K6<>@NPT§ΧЧ֧اڧ ".068<@LNTV¨ШҨԨ  $(46<> 0J@j0J@5CJU 0J@5CJ0J@5@ CJ j0J@U0J@mHnHuEبڨ"$@BDFHJLNPRTܩީ B p0 p$&0 0 000#&PP/ =!"#$%1 0 00#&PP/ =!"#$% P* 0 0&PP/ =!"#$%. 0 0&PP/ =!"#$% P- 0 00&PP / =!"#$%X 0 0&PP/ =!"#$% P0 - 0 00#&PP/ =!"#$%ODd 0B  S A? 2P]@TդaD;`!P]@TդaD`k[xMQJP5B*YSPs~@C46!opM Z7Vܗ s&=3XA*_DTK2TjGFW+ujMhC)Db8X9u8 y3GxoR q6>=68C_}T :< Gp(sisY%N~s,"8g-꿫qZh'87׊GK3v]ltZ]..Kӑa U]|v/$,酫7-h V&DA>-1LDIn'kI Y=  !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~Root Entry  Fd[7@Data WordDocument y+ObjectPool j[7d[7_996410976Fj[7j[7Ole CompObjfObjInfo  FMicrosoft Equation 3.0 DS Equation Equation.39qcIgI  e@  e@Homogeneous pool costs Activity driver s practical cEquation Native  1TableASummaryInformation( DocumentSummaryInformation8LapacityOh+'0$4 HT p |  #Chapter 12--Activity-Based Costings<Study Guide for Cost Management: Accounting and Control, 3eAl Chenl CNormal Jack Litten43kMicrosoft Word 9.0t@XM@6г@@C7k՜.+,0 px   e7i #Chapter 12--Activity-Based Costing Title  FMicrosoft Word Document MSWoW iJ@J Normal$<<a$CJOJQJ_HmH sH tH :@: Heading 1 $@& 5;CJ>> Heading 2 $x@&56@CJ44 Heading 3 $@&5:@: Heading 4 $@& 5:CJ** Heading 5@&** Heading 6@&** Heading 7@&** Heading 8@&* * Heading 9 @&<A@< Default Paragraph FontO Boxed Textq$ & Fd$d%d&d'dNOPQ]^a$6.O. Check Box  & F_<< Check Box Bullet  & F`DO"D Enum Ques1 CB@ ^` NO!2N Enum Ques1 FL! CB@t^`tDOBD Enum Ques2  B@ ^ `NARN Enum Ques2 FL!  XB@0^`0`O!b` Enum Solu8$ CB@@\d$^`\a$CJPOarP Enum Solu FL& DB@@D^D`DOqD Enum Solu FL w/Spc Abvx>a> Enum Solu w/Spc Abvx2O2 Equation$a$5CJB @B Footer$ !a$ @ OJQJ>O> Hd Chap Name$` ]` a$CJ(JOJ Hd Chap Numb$da$5;CJ8OJQJfOf Hd Sect,$$` hx&dP]` a$5;@CJKHOJQJDOD Hd Sect w/More Spce X]e :O: Hd Sect w/PgBrk $6O6 Hdg 1 Solu !$@& a$CJBO"B Hdg 1 Solu w/More Spc"h:OA2: Hdg 2 Solu#$,@& a$CJBO1BB Hdg 2 Solu w/Less Spc$<BO1RB Hdg 2 Solu w/More Spc%h>@b> Header& %B&dPCJJOrJ Heading 1 w/More Spc'$@& a$FOF Heading 1 w/PgBrk($$@& a$0O0 Instruc)$ 56CJ Instruc w/Arrowj* & F>ThTf6<O< Instruc w/More Spc+NON Key Terms),$d1$^`a$@O@ Lead 9 pts-$dLa$CJLOL Learning Obj". hh((^h`:OA: MC Choices/ B.O!. MC Ques 0$44 MC Ques w/Less1:O": MC Ques w/PgBrk 2$TO2T Outline Bullet 1.3 & Fd ^@>OB> Outline Bullet A. 4 & FeFORF Outline Bullet a.5 & Fap^p>b> Outline Bullet I. 6 & FfHOrH Outline Lvl 1.7 @^`HOH Outline Lvl A.8 8@8 ^8` HOH Outline Lvl a.9 @^`JJ Outline Lvl a. Ind: @^POP Outline Lvl I.;$ X@X^X`5:: Outline Text 1. <^:O: Outline Text A. =8^8:: Outline Text a. >^:O: Outline Text I. ?X^XB)@B Page Number5@CJEHOJQJkHPOP Rule1A$$$$d0N0]$^$a$CJ BO"B Solu TextB$Dd$^Da$CJn2n Stmt 2 Col Solu:C$ 0!d$]^a$CJJOBJ Tab Tbl)D$ Pd^a$2OAR2 Tab Tbl FirstEdJOAbJ Tab Tbl HdF Pd$<<5CJ0OAr0 Tab Tbl LastG.. Tbl HdH$a$5CJ,, Tbl TxtI$a$CJJOJ Outline Lvl (1)J @\^`\JJ Outline Lvl (a)K P P \^P `\@O@ Outline Bullet (1) L & Fb@O@ Outline Bullet (a) M & Fm,O, 6 pt. lineNCJ ,O, 3 pt. lineOCJ0B0 Body TextP B*ph0P0 Body Text 2Q$a$D&@!D Footnote ReferenceCJH*OJQJ222 Footnote TextSCJTQBT Outline a. No BulletT & F @ p^p^R^ Outline Lvl I. 2-lines U$]^]`a$2Ab2 Tabl Tbl LastV6Mdg;6Mdgj    BDZrt4tt;*2*e****J+ "#7kX&'QGMk $ 1 w 7 d % { bdS-sWNnEjY$h87 m =!!!""U""#D##$$E%t%%&J&&''''T(((!)f))))*!+F++ ,u,,~--..j///8001111222i33\445R56667V7X7r7s77o8889z99+::::o;;4<<<8===+>>>?ydy|yyyyyyyyyyyy zzz,z8z9zSzazbzzzzzzzzzz{"{#{9{H{I{g{{{{{{ ||}I}v}}} ~>~X~|~~~~0g6qр9`{_yÂۂ܂()MN\]ƒЃу҃ӃԃՃփ׃؃كڃ5689<00A000.0.0.0.0000;0O0807070a 50 080707070 080=07090L 90a 5090J0J0J07090M 90808080g 80O0 0 0O0;0O070L 70 L 70 07090909090909080709090 070d 30d 307090J0J09070 0 08070909070909080=0 080709090707090a 5090a 50a 5070 080=080=0 0807070O0;0O0?0d 30d 30d 308070909070d 3007070N 90N 90N 90 070O 90O 90O 90b L0b L0m M0b L0b L0b L0b L0 070P 90P 90 08070d 30d 3070d 30d 30 d 30 O0;0O0?070e 408070707070n M0n M0807070n M0 080707070n M0n M0 08070d 30 d 30 7009090a 50a 50a 500300 0)0YB-0YB`,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB,0YB`,0YB-0YB0YB0YB0YB0YB0YB0YB0YB0YB0YB0YB0YB00YB0YB0YB0YB0YB0YB)000M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M20M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M00M/0M/0M/0M/0/000M/0M/0M/0M/0M/0M20M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M00M/0M/0M/0M/0M/0M 0M00\F0\D0\D0\D0\D0\G0\0\F0\D0\D0\D0\D0\D0\D0\D0\G0\+00_(00\`0\`(0\`)0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`0\`'0\`0E0\`D0\`D0\`D0\`D0\`G0\`0\`F0\`D0\`D0\`D0\`D0\`G0\`0\`(0)0;f0;f00;f(000E0gD0gD0gD0gD0gD0gD0gD0gG0g0gF0gD0gD0gD0gD0gD0gD0gG0g+00m(00m0m 0m_ 0m_ 0m_ 0m_ 0m_ 0m_ 0m_ 00m!0`$0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur`#0Ur"0Ur`"0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur0Ur`!0Ur"0Ur$00tB0tB0tB0tB0tB0tB0tB0t0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0t0t%0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t0tB0t0t#0t0t0t0t0t0t0t0tB0tB0tB0tB0tB0tB0t#0t0tB0tB0tB0tB0tB0tB0tB0tB0tB0t0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0tB0t0tB0tB0tB0tB0tB0tB0tB0tB0tB0@&0@0@&0@0@0@0@&0@0@&0@0@0@0@&0@0@0@0@&0@0@&0@0@0@0 00000000000000000000>>>>Mf2@Z|e7n}6 kpsuz| Z,8@DKTV`e!mq5vvFwwy9a ZO ب lnoqrtvwxy{}~ m.+B+D+;: 07;?FJMTX} !!!!!!!T!!!@  @t \(  \B  S ?"\B  S ?"-\B  S ?"n(    6 >?"  x"  < GHcIJcKALMN   x"  < GHIAJKFLMl   ~"  B GHIAJKL=NMNiZ   ~"  B G&HIAJKL|MN   B S  ?O@'!+V7;#t"!ttf =t L t>WOPuWOPuWOPuqqt2t5t7t8t:t;t=t>t@t>yHyJycy ~*~,~=~Âу҃<JJiiqArt2t5t:t;t@t>ycy ~=~Âу҃<33  JJ""""''''''''(((((!)!)++..001112125 5L6O6Z6]666V7W7X7X7\7\7o7r7s7s7777777Y;Y;f?f???????@@0@1@@@DDJJJJLLLLxTxT5U5U]]ccggiijjoopp#q$q&q&qqq:x;x||||||~~~~Ձց‚Âςڂ'NO]tƒÃу҃ڃڃ467<Amy ColeKC:\WINDOWS\Application Data\Microsoft\Word\AutoRecovery save of AL_Ch12.asdAmy ColeKC:\WINDOWS\Application Data\Microsoft\Word\AutoRecovery save of AL_Ch12.asdAmy ColeKC:\WINDOWS\Application Data\Microsoft\Word\AutoRecovery save of AL_Ch12.asdAmy Cole1C:\My Documents\Cost Mgmt Study Guide\AL_Ch12.docAmy Cole1C:\My Documents\Cost Mgmt Study Guide\AL_Ch12.docAmy Cole1C:\My Documents\Cost Mgmt Study Guide\AL_Ch12.docAmy Cole1C:\My Documents\Cost Mgmt Study Guide\AL_Ch12.docAmy Cole1C:\My Documents\Cost Mgmt Study Guide\AL_Ch12.doc Jack LittencC:\Documents and Settings\new user\Application Data\Microsoft\Word\AutoRecovery save of AL_Ch12.asd Jack LittenU\\Malvine\c\Project Files\H&M Cost\supplements\study guide\files from Amy\AL_Ch12.docIz a( RD&j : 7<|  k )RC!xA`S2) 8! -0 *^LIq *^ (MD *^WV!rhA&"l#lqj)$ *^*YM$ *^=&4q8-C!_-Um- xb/ <0 (T1 !z26|+2 *^3UCG4ڍƩi]4 a[5A3KAlE&Ӑ?$bH [^H *^hI "J hBKn,oWEO!?'PKБF Q W5SUl$HWv6/!YڍƩ%Y xZ&.L$\ _y6B`J<aUM a3Bo b Ge 8Bf Vj {/mJA=&VjmxA.?xZj : 7>A=&VjmxA_-.?xZj : 7>A=&Vjm$HW.?xZxZxZ7>A<a3<a<aڔ @h h^h`OJQJo(rtڔ @h h^h`OJQJo(rڔ @h h^h`OJQJo(r<۔ @h h^h`OJQJo(r۔ @h h^h`OJQJo(rܔ @h h^h`OJQJo(rhܔ @h h^h`OJQJo(rܔ @h h^h`OJQJo(r0ݔ @h h^h`OJQJo(rݔ (@h h^h`OJQJo(rݔ '@^`CJ OJQJo(n`ޔ t@hCJOJQJo(II2S        vBc        Z9u        v        ǰ         M        d        A        2v        Jl        ǰ         ZB        ޤ\(D[       Z        aazaaaaaaaaaaaaaaaabbb!b"b#bWbXbYbwbxbybbbbbbbbbb>ydy|yyyyyyyyyyyy zzz,z8z9zSzazbzzzzzzzzzz{"{#{9{H{I{Â]у<@Auto HP LaserJet 4M on JACK2Ne00:winspoolHP LaserJet 4MAuto HP LaserJet 4M on JACK24C odXXLetterDINU"4=<Auto HP LaserJet 4M on JACK24C odXXLetterDINU"4=<qqL>qq, !+"+#$%<)<*<,<-A0A1A23>3?JK_`=f=glmntuvwxyS{S|*~**0000;`@``4@` `D@`$`L@`(`T@`,`\@`0`d@`6`p@`:`x@`@`B`@`P`@`^`@`t`@`|`@```@```$@```0@``8@```D@````T@UnknownG: Times New Roman5Symbol3& : ArialA& Arial Narrow?& Arial BlackUZapfDingbats BTSymbol;Wingdings?5 z Courier New#h3ra&Cd&bbF++k720di? 2Q"Chapter 12--Activity-Based Costing;Study Guide for Cost Management: Accounting and Control, 3eAl Chen Jack LittenCompObjjrdDocWord.Document.89q