Aftermarket HDS Multiplatform Software Installation ...

Aftermarket HDS Multiplatform Software Installation Instructions

This document contains instructions for all three HDS platforms. HDSMPFxxxxxxx is universal for the latest version of HDS software. Option 1 is for HDS PC and CM Update PC software installation. Option 2 is for HDS and CM Update Pocket Tester software installation. Option 3 is for HDS and CM Update GDS2200 Tablet installation and OS update if required.

Minimum PC Requirements: 1. Microsoft? Windows? 2000 Professional (SP4 or later) or XP (SP1 or later). Note 1: Administrator privileges are required before installing HDS. Note 2: Windows NT? 4.0, Windows 95, Windows 98 and Windows Me are not supported. 2. CD-ROM drive. 3. USB or RS232 serial port.

Note: If a RS232 port is not available, see Appendix. 4. Hard disk drive with at least 500MB of free space. 5. Monitor capable of displaying in VGA mode or above. 6. Keyboard and Mouse. 7. 256MB PCMCIA Memory Card (for GDS2200 Installation only)

Installation Preparation

1. Quit all other running programs. 2. Turn off screen saver. 3. Select Details in the View menu bar of Windows Explorer.

4. Download the file HDSMPFxxxxxxx.exe from the HELM site to your PC desktop. 5. Double-click the HDSMPFxxxxxxx.exe file to extract the HDS Installation Software. 6. Confirm the "WinZip Self-Extractor ? HDSMPF1016xxx.exe unzip to folder is

C:\HDSMFPxxxxxxx.

1

7. Select the Unzip button.

8. The unzip process will install the HDSMPFxxxxxxx directory on the C:\drive. 9. Confirm "C:\HDSMPFxxxxxxx" was created.

10. Double-click the HDSMPFxxxxxxx folder (example: HDSMPF1016006). 11. Locate and double-click "setup.exe"

12. This will install the HORWA05DS directory on your computer. 13. If you receive a prompt asking if your PC is connected to the Honda Dealer Network,

Select No. 14. If you receive a prompt making sure GDS2200 is not connected to a computer, make

sure the GDS is not connected to your computer and select OK. 15. If you receive a prompt asking to Reboot GDS2200, disregard this request and select

OK. 16. If you receive a prompt asking to connect the docking station to the PC via USB cable,

disregard this request and select OK.

2

17. Confirm the C:\HORWA05DS folder was created.

3

HDS PC and CM Update PC Software Installation

Option 1: HDS PC Software and CM Update (ECU Rewrite) PC installation, follow these steps.

Note: You will need a Honda Interface Module (HIM) and blue PC Interface Cable to connect your PC to the vehicle. 1. Double-click the HORWA05DS folder. 2. Inside the HORWA05DS folder locate and double-click the PC folder C:\HORWA05DS\PC. 3. Inside the PC folder locate and double-click the Installation folder C:\HORWA05DS\PC\Installation. 4. Locate and double-click the setup.exe. This will install the HDS PC software. 5. If you are prompted to enter your dealer number, please enter 000000.

6. Confirm C:\GenRad folder was created.

7. Double-click the Diagnostic System icon on your desktop to start the HDS PC software. Diagnostic System

4

8. Double-click the "CM Update (ECU Rewrite)" Icon from the Start/All Programs/CM Update (ECU Rewrite) menu to start the CM Update software.

Note: You will need a HIM and blue PC interface cable to connect your PC to the vehicle.

9. Connect HIM to vehicle Data Link Connector (DLC).

10. Connect blue PC Interface Cable between PC and HIM.

HIM part#TDS35570101 PC Interface cable part#VET02002832

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download