2018 Indiana Forest Porducts Price Report and Trend Analysis

2018 Indiana Forest Products Price Report and Trend Analysis

January 2018

Contributors: Jeffrey Settle, Forest Resource Information; Chris Gonso, Ecosystem Services Specialist for the Indiana Department of Natural Resources, Division of Forestry; and Mike Seidl, Hardwoods Program Manager

for the Indiana State Department of Agriculture

Page 2

Survey Procedures and Response

Data is collected twice a year, but log prices change constantly. Standard appraisal techniques by those familiar with local market conditions should be used to obtain estimates of current market values for stands of timber or lots of logs. Please note, because of the small number of mills reporting logging costs, "stumpage prices" estimated by deducting the average logging and hauling costs (Table 5) from delivered log prices must be interpreted with extreme caution and is meant to only serve as a guide. Actual stumpage values you may be offered depend on many variables such as access, terrain, time of year, etc.

Data for this survey was obtained by a combination direct mail and email survey to a variety of forest product industry including sawmills, veneer mills, concentration yards, and independent log buyers. Only firms operating in Indiana were included. The survey was conducted and analyzed by the Indiana Division of Forestry. The prices reported are for logs delivered to the log yards of the reporting mills or concentration yards. Thus, prices reported may include logs shipped in from other states (e.g. black cherry veneer logs from Pennsylvania and New York).

The survey was mailed to 17 firms and emailed to 31 firms. It is estimated these companies produce close to 90% of the state's roundwood production. Electronic reminders, follow-up phone calls and additional mailings encouraged responses.

9 firms reported some useful data. Four mills reported producing 1 million board feet (MMBF) or more (Figure 1). Two mills reported production of 5 MMBF or greater. Total board foot production reported for 2017 was 36 MMBF compared to 70 MMBF for 2016, and 42 MMBF for 2015. The largest single mill production reported was 20 MMBF. These annual levels are not comparable since they do not represent a statistical estimate of total production. The number of companies contributing price data for each product is shown in the second and third columns in Tables 2 and 3, and in the second column in Tables 4 and 5.

The price statistics by species and grade don't include data from small custom mills, because most do not purchase logs, or they pay a fixed price for all species and grades of pallet-grade logs. They are, however, the primary source of data on the cost of custom sawing and pallet logs. The custom sawing costs reported in Table 5 do not reflect the operating cost of large mills.

This report can be used as an indication of price trends for logs of defined species and qualities. It should not be used for the appraisal of logs or standing timber (stumpage). Stumpage price averages are reported by the Indiana Association of Consulting Foresters in the Indiana Woodland Steward, .

Page 3

Figure 1. Distribution of the 4 mills reporting 2017 level of production.

Number of Mills

2.5 2

1.5 1

0.5 0

Hardwood Lumber Prices

Hardwood lumber prices as of January 2013 are shown in Table 1, which represents prices per thousand board feet (MBF) for green, 1 inch thick 4/4 lumber by species and grade compiled by the Hardwood Market report out of Memphis, TN. Log prices are directly tied to lumber prices since logs are delivered to mills on a continuing basis. This allows mills to base the price they pay for logs on current lumber market prices. The link to prices paid for standing timber is less direct, depending on how far in advance of logging a stand of timber is purchased.

Page 4

Premium Species

Red oak and white oak are often looked at as the primary market and economic indicators in the hardwood industry. Current pricing for both red and white oak is on the rise. White oak lumber (#2/Btr) prices are 3% higher than what was reported in July 2017 and red oak prices are almost 6% higher.

The red oak market is doing very well. There are several circumstances contributing to the strong market. One reason is that exporters are building inventories to meet the expected strong demand from China after their New Year, another is those buying green lumber are also building inventories in anticipation of the seasonal slowdown of domestic production around the Holidays and lastly, increasing log exports have folks concerned about availability as well as higher log costs to domestic sawmills. Current pricing for red oak is at levels not seen since January 2015. Steady demand is being reported from the moulding/millwork, cabinet, and furniture sectors and the residential flooring folks are aggressively buying #2/3A red oak. #1C is the most popular KD red oak item and much of that production is headed to China and Vietnam. Pricing for green upper grade (FAS&FIF), red oak lumber, with a $200 premium peaked at $1,370 per thousand board feet (MBF) in the summer of 2014. Prices for FAS lumber spiraled downward through early 2016 and has since risen to the current price of $1,150 MBF. Both #1C and 2A pricing have been increasing since January of 2016 to $845 and $560 MBF respectfully.

White oak markets are also experiencing very good times as most mills are able to move their production quite easily. Most of the upper grade lumber is going overseas (Far East and Europe). Here is the states, white oak is most popular with the hardwood flooring industry. Upper grade white oak pricing has increased steadily since January 2016 to its current price of $1,650 MBF. This price is also 38% higher than what was reported in July of 2013. #1C and #2A pricing has also firmed quite well with increases of 34% and 7% respectfully. KD 4/4 upper grade white oak can be sold at about any price and both #1 and #2C are very strong as well.

Producers of green walnut are very happy with the current market. Most all grades and thicknesses are in strong demand and prices continue to rise. Upper grade green walnut prices ($2,900 MBF) are close to July 2015 prices. #1C prices are over 47% higher than in July 2013 and 16% higher than those reported in July 2017. Most say the walnut market is just crazy and wonder when prices will begin to fall.

The cherry market continues to rebound, almost solely on the Chinese markets. Many exporters are constantly sold out of lumber. This strong Chinese market offsets the sluggish domestic markets. Cabinet, flooring, and furniture manufacturers are producing few products in cherry and usage by the architectural millwork and moulding segments are similarly low. Green cherry lumber prices have recovered nicely since their low point during the summer of 2016. Upper grade cherry prices are 16% higher and the commons are averaging 13% higher than those reported in July 2016.

Hard maple is also making a comeback from less than desirable market conditions. Much of the turnaround can be attributed to manufacturers switching from soft maple to hard maple. The segment using good volumes of hard maple is the cabinet industry. Most of the #1C production is going into cabinets. Little hard maple is shipped overseas. Green lumber pricing increases are smaller than for other species. Upper grade hard maple pricing is only 10% higher than what was reported in July 2017 while the combined average of #1 and #2A is 14% higher.

Other Species

Page 5

Poplar has been the "steady Eddy" of the hardwood market. Despite more production, supply and demand remain in good balance. Demand has been good for both domestic and international markets. Near record poplar exports and the much improved pallet market has taken #1C and #2A inventories to more manageable levels. Green lumber pricing however is pretty consistent since January 2015. The average price of the common grade poplar is still seeing the effects of large inventories as prices are lower than in years past.

Markets for soft maple continue to struggle. Most are finding it hard to generate any meaningful sales for green and KD upper grade lumber. Demand is reported to be flat for both #1C and #2A lumber as well. Mills are trying their best to control soft maple production to offset large unsold inventories. Many point to the substation of hard maple for soft maple as the main issue with soft markets. Upper grade soft maple prices have dropped 4% since the fall of 2016 while the combined average price of common grade soft maple has dropped 12%.

Ash lumber markets are very strong. The pace of the ash business was quite good in recent months and continues to gain momentum. China is buying very large amounts of lumber and orders from Chinese buyers are plentiful; as exporters are filling containers prior to China's New Year. Demand is outpacing supply for almost every ash item. Upper grade ash lumber prices are 1,075 MBF which is almost 12% higher than a year ago. Common grade ash prices are also higher with #1C at $715 MBF (18% increase from a year ago) and #2A at $420 MBF (10% increase)

Hickory markets have improved since late last year. In 2016, many mills struggled to move their hickory lumber but most reports indicate now mills are having little difficulty moving their production. Much of the green production is going to flooring facilities or to dry kilns in preparation to export. The improved industrial markets have also played a part in the positive comments for hickory. Record volumes of lumber are being shipped to Mexico and China. Upper grade hickory lumber prices are nearing levels reported during the summer of 2015. The overall average of hickory lumber prices are 7% higher than in the fall of 2016.

................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download