CRM Point Quick Start Guide

Model: CRM-P

Introduction

Thank you for purchasing the Ubiquiti Networks? CRM PointTM. This Quick Start Guide is designed to guide you through installation and also includes warranty terms.

Package Contents

CRM Point

Ethernet Cable

Model: CRM-P

microSD Card (8 GB)

System Requirement

Quick Start Guide

Web Browser: Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer 11 (or above)

TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, indoor cabling requirements, and Dynamic Frequency Selection (DFS) requirements.

Hardware Overview Front Panel LED

LED Color White

Alternating White/Blue

Blue

Status

Factory defaults.

Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.

Device is working properly.

Top Panel

Ethernet Port

Ethernet This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by an 802.3af PoE switch, such as the Ubiquiti Networks EdgeSwitchTM.

Bottom Panel

Reset Button

Micro-USB Port

microSD Slot

Reset The Reset button serves two functions: ? Restart Press and release the Reset button

quickly. ? Restore to Factory Default Settings Press and

hold the Reset button for more than five seconds. Micro-USB Optional power source (minimum 5V, 1A) if PoE is not available. microSD Insert the included microSD Card before powering on the CRM Point.

Hardware Installation

1. Connect the Ethernet Cable to the Ethernet port.

2. Insert the included microSD Card into the microSD Slot.

3. Connect the other end of the cable to a port on a network switch, such as an EdgeSwitch.

24V

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download