Specifications



PIPE & WALL VIDEO INSPECTION SYSTEMS USER MANUALFor3288/3388 SERIESASSEMBLING AND OPERATING INSTRUCTIONS (3288) (())(3388)-------------------------------------------------------------------------------Read instructions carefully before operating this systemWARNING 1.Never use this device in an environment with explosive materials such as GAS, OIL, ETC.2.Avoid using the device in extremely cold, hot or humid environment; otherwise it may damage the device. Do not drop or press hard on the device.3.Avoid using the parts / components from other manufacturers to this system, which may damage the equipment due to the un-compatibility. 4.Warranty invalidation if the device is disassembled by usersor if there are any physical damages.5.Always back up your data before connecting your USB stick / Micro SD Card to this system. The manufacturer is not responsible for any data damage or loss on your USB stick / Micro SD Card for any reason.6.Do not disconnect the unit while recording or playing. It may damage the unit and/or the USB stick / Micro SD Card.7.Don’t misuse the Battery Charger Cable and Power Cord, otherwise the battery pack may be damaged or the system can not work properly. 8.The system’s PUSH CABLE made of fiberglass is very rigid and not flexible. It CAN NOT be bent sharply or pushed too hard; otherwise it will be broken. 9.If you have an extra portable cable reel, and try to put it in the case after use, you must put it in the right position; otherwise, LCD monitor may be broken by the part on the reel when you close the case. CONTENTSAssembly Drawing and Parts List..................................................................1Specifications..................................................................................................2User Manual.....................................................................................................3Application.......................................................................................................3Know Your Device………………………………………………………………….4Counter.............................................................................................................5512Hz Transmitter (OPTIONAL PART)...........................................................5Camera Head...................................................................................................5Cable Reel........................................................................................................6Remote Control (For Operating DVR only)....................................................6System Set-Up.................................................................................................7System Menu Setting......................................................................................8DVR Recording Operation .............................................................................9LED Indicators...............................................................................................10Recording Time Limit....................................................................................10Schedule Recording......................................................................................10Recording via USB Stick/ Micro SD Card....................................................11Video Recording Format...............................................................................11Voice Recording ...........................................................................................11Video Playing.................................................................................................11Select the Video File......................................................................................11Fast Forwarding and Rewinding..................................................................11Compatible Video Format.............................................................................12Video Player Software Installation...............................................................12Recharging ....................................................................................................14Trouble Shooting ……...................................................................................15Assembly Drawing and Parts ListPart No.Description1□50mm□40mm self leveling image Camera□50mm□40mm Camera Head with built-in Transmitter*ABOVE CAMERAS CAN BE PLASTIC OR STAINLESS STEEL HOUSING2□7 INCH □10 INCH Monitor3□60M(200FT) □90M(300FT) □120M(400FT) Cable Cfiberglass Cable 4POWER ADAPTER &Battery Charger5BATTERY CASE6FUSE BAG7SKIDS SCREW (12 PCS)8CAMERA SKIDS (3PCS)93M&5M VIDEO CABLE 10REMOTE CONTROL11DISC⑦1SpecificationsItemDescriptionPower adapter 110VAC~240VAC13.5VDC 1700mABattery Case LI-ION batteryLength of Cable □60M(200FT) □90M(300FT) □120M(400 FT) Camera Light SourceBuilt-in White LED lights (18PCS)Camera Angle-of-View90°(Horizontal),90°(Vertical)Camera Depth-of-View400 mm (approximate)Camera ImageColor, 680*480 pixel Monitor SCREEN SIZE7”OR10” TFT LCD Color MonitorMonitor Picture Resolution1440*234 pixel (for 10”LCD)Monitor Input Voltage12 Volts DCSystem Operating Temperature-28°C to 50°C2User ManualApplicationWATER SUPPLY WASTE WATER ELECTRICAL AIR CONDITIONERCABLE DUCTINGDUCTED VACCUM SYSTEMSPLUMBINGBUILDINGSWARNING: NEVER USE THIS DEVICE IN AN ENVIRONMENT WITH EXPLOSIVE MATERIALS SUCH AS GAS, OIL, ETC.3Know Your Device7”LCD10”LCDVIDEO SELECTOR BUTTONMENUDOWN SELECTORUP SELECTORMENU UP/DOWN SELECTORLED ON/OFF POWER ButtonFLAT SCREENDC 12V INVIDEO OUTCAMERA PORTusb/Micro SD PORT 13. POWER & CHARGE button14. CHARGE PORT 15. DC 12V OUTPUT CORD 16. Sunshade 17. MIC DVR ON/OFFRECORDSTOP/EXIT SETUPUPDOWNPLAY/ENT 25. MIC ON/OFF4Meter Counter ( For 3388M, 3288 series )1 Metric & Imperial Conversion 2.Reset 3. Display of Metric or ImperialSetting the Cable: Put the cable through the notch of counter and then set the cable in the notch by rotating the copper knob on both ends.Removable Transmitter Housing(optional)This Transmitter housing can be installed between the camera head and the spring kit once you want touse transmitter to locate with a receiver.It can also be removed when necessary.Camera Head1. White LEDS 2. Lens3. Spring4. Skid5Cable reel1. Meter Counter Box2. Reset Button3. Meter& imperial Button4. Female Plug 5. Bracket6. Cable WheelRemote Control (For Operating DVR and SD Card Recording) Enter: Enter to view and play video Up: Go to up/previous item REC: Start recording/ Snap Shooting (only available for new version) Setup: System setup and recording features Enter: System in 6) Down: Select down/next item 7) Exit: Stop or escape from current menu 8) Left: Select Left item 9) Right: Select Right item 10) Rewind: Review video 11) Forward: forward video6System Set-Up IMPORTANT: When you connect the Camera to the Monitor, the power must be off; otherwise both units will be damaged.Connect the reel cable to the Monitor(See Figure 1-A).Plug the Power Adapter cord into the wall AC socket and the other end into the DC 13.5V-Input Jack,. Note : Don’t misuse the Power Cord & Battery Charger Cable, otherwise the system can not work properly, or the battery pack may be damaged. . Press the POWER button on the front of the Monitor.Gently lower the Camera into a pipe duct, etc and reel out the Cable until it is at the desired depth.Record the pictures if you need (see DVR Operating). Video Out: By using a video cable you can transfer the picture to other larger Screen.When you finish the job, carefully remove the Camera head from the pipe duct, etc, clean it with a clean, soft and dry cloth and then put the Camera into the previous positionFigure 17System Menu SettingClock setting: set date and time*Time FormatSelect: 24Hour - 12HourYearSet yearMonthSet monthDaySet dayHourSet hourMinuteSet minutesSecondSet secondsLanguage SettingSelect: English - ChineseSystem: showing software version, product version, free space and used space (when USB/ Micro SD Card is connected)Record setup: Storage Device Selection ---USB Device or Micro SD cardPlay Mode: No circle, One circle, List circleMaster reset: press OK again to perform a master resetFirmware update: locate the directory where new firmware is storedBrowse File:Showing all files on the current USB/ Micro SD Card medium.Remove USB/Micro SD Card device (only when USB/Micro SD Card device is connected)Always use this option before safely removing the USB /Micro SD Card device from the USB/Micro SD Card portRemark: When you plug in the USB key/Micro SD card before starting the device, maybe the device can’t find the USB stick/Micro SD card. In this case, please remove them and try again.8DVR/Micro SD RECORDING OPERATION(Recording via MICRO SD Card is only available for the new versions)Set the Screen Video Button on Video 2.Take off the isolation sheet from the Remote Control Battery.Press the Remote Control Button 5 to enter the Recording system, you can see DVR system Recorder PLAY VIDEO manual on the screen.Insert your USB stick/ removable hard disc etc into the USB Port, or Micro SD Card into Micro SD Card Slot, you can see USB stick/ Micro SD Card Connected on the screen and the LED light indicator is on.Press Remote Control Button 3 to start the recording and the RECORDING LED light is on. In recording, if you press the RECORDING button again, the DVR will take a photo and it is saved in the USB key or Micro SD card (only available for new versions).STOPPress Remote Control Button7 to stop recording.Press Remote Control Button 1 to review recording.If you need to manage your recorded pictures, press Remote Control Button 4 . You can also manage the files by selecting the SETTING on PLAY VIDEO manual on the screen. 9NOTE: DVR system sometimes need 10 - 20 seconds for reposition before it can work properly, please let it run about 20 seconds each time when you try to record.USB flash disk and Micro SD’s max memory is 8G bit.LED IndicatorsREM : Remote receiving windowPower: It indicates that the system is onRecording: It will blink during recordingUSB/Micro SD: It indicates that USB stick/Micro SD is connectedError: It indicates that the system or USB device has errorIR: It blinks when the remote control is in use for Recording VideoThe recorded video files will be found in a directory of USB/Micro SD devices.You can use the on-screen menu or press (REC) button to start recording. Press (■/EXIT) button to stop recording. During the recording, the screen will display recording time and time limit (up to 60 minutes).Recording time limitSometimes you may forget to stop the recording after it is initiated. This unit is featured with a recording time limit. The default time limit is 60 minutes. If recording time over 1 hour, the system will record with a new fileSchedule recordingYou can schedule a recording in advance. Simply enable the schedule recording in the SETUP and then the unit will ask user to setup timing. Recording schedule can be used once. You have to set up schedule again for next recording. 10Recording via USB Stick / Micro SD CardThe unit can be used to record video and voice via USB devices / Micro SD Card .The recorded video will be stored in the USB devices / Micro SD Card and played back on the TV screen.Video recording formatThe default video recording resolution is 640*480. One-hour recording will take up storage of 500MB. User may select 320*240 to save storage space. Voice recording A microphone button located on the front panel allows the user to press the button on to record a voice while the video is recording recording(This function is only available for new versions).Video PlayingYou can use on-screen menu to enter “play video” mode. The unit will display the recorded video and other compatible videos stored in USB stick / Micro SD Card. It will not list the non-compatible videos.Select the Video File.When you enter “play video” mode, the set will display all of the available video files on the screen.You can use [▲] or [▼] button to select desired video and press [?/ENT] button to play.Press and hold [▲] or [▼] button to go to previous or next video.Use [?/ENT] button to start or pause the playing .Use [■/exit] button to stop or go back to previous menu.The screen will display “loading, please wait …” for a few seconds before playing video.Fast Forwarding and RewindingYou can use [?] or [?] button on the remote control to fast forwarding or rewinding (1x, 2x, 4x, or 8x, speed). Always press [?/ENT] button to go back to normal playing.11Compatible video format:Divx3.11/Divx4/Divx5/MPEG1/MPEG2/MPEG4 (MPEG4 video file format: .avi,.m4v, .MPG, MPEG, .VOB)Note: The video player of the device may not support some downloaded videos. Video Player Software InstallationGenerally, the recorded videos can be played on the computer purchased after the year 2006. If you cannot open the recorded document on computer, there are two options: Option 1: Go to the website kmplayer.en.download and download the KMPlayer software for free. Option 2: Put the DISC into CD-ROM and then install the system according to the icon as follows: 12 13Recharging the Battery1) Plug the charger into the AC socket on the wall and insert the other end into the DC jack of battery box (See Figure2- A). Note : Don’t misuse the battery charger cable and power code, otherwise the battery pack may be damaged, or the system can not work properly.2) Press the charge button (See Figure2-B) while the Battery Box is turned off. The battery can be charged while the battery box is on and the device is being used. However, once the power in the battery runs completely out, it can only be charged when the Battery Box is turned off. 3) The charge LED will be red during charging and will turn green when charging is over (Normal charging time: 5 - 6 hours).Figure 2IMPORTANT MESSAGE: Do not overcharge the battery! Overcharging can result in acid leaking from or damage to the battery. 14Battery specifications:TOTAL POWER ≤14WCHARGER 13.5V 1700mACHARGE TIME 6 HOURSWORKING TIME ≥200 MINUTESPROTECTIVE VOLTAGE 8.1 VTHE VOLTAGE BEFOR DISCHARGING 12.6VLOAD CURRENT 1100mA(INPUT 12.2V HOUR)TROUBLE SHOOTINGTroubleReason / SolutionBlank screen1. Change the fuse2. Recharge the battery3. Check power line and connect it again.No signal1. Read the manual again and reconnect it.2. Check the camera and screw down3. Clean the camera pins4. Check the pins and find if they are in the same levelThe camera has weak or no lightPress the “MENU” button, locate the LED brightness setting and then adjust the brightness.No recording1. Press the “Video” button and change to Video22. Press POWER button and the monitor indicator light is green.3. Use another USB stick /micro SD and tryRecording abnormityShut off the unit and restart the unit in correct stepsFlashing pictures1. Deficiency of the battery power. Please recharge the battery2.Misuse of the charger cable and power cord: switch the cablesNo working of battery rechargingMisuse of the charger cable and power cord : switch the cables15 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download