IPOLiS mobile

iPOLiS mobile

2.2 English Android ver

Samsung Techwin's iPOLiS mobile is an android based dedicated application for smartphones and tablet PCs to remotely monitor and control Samsung Techwin's network based products.

This manual is based on using the application on Samsung Galaxy Note smartphone. When using a different mobile device, the actual button location and interface may be different.

The iPOLiS mobile application can be downloaded freely and installed from Google Play. To search iPOLiS mobile application from Google Play, type

"iPOLiS", "SAMSUNG TECHWIN", or "TECHWIN" and run a search, ignoring the letter case.

 User of previous version software (v1.0) needs to register added devices to the newly installed software again. User of version 1.3 or later does not require re-registering devices after updating the software. Updating will migrate device list to the new software.

If enabled with a password lock, updating for smartphone/tablet PCs other than Samsung Galaxy series may experience problems with updating. In such cases, disable password lock during updating.

This application is optimized for Android OS 2.3.5, 4.0.3 and 4.1.2.

This application had been tested for listed devices:

- Samsung Galaxy S2 (Android v2.3.5) series

- Samsung Galaxy S3 (Android v4.1.2) series

- Samsung Galaxy Note (Android v4.0.3) series

- Samsung Galaxy Note 10.1 (Android v4.1.2) series

0. Before Installation

For proper monitoring with iPOLiS mobile on your device, the device should suffice below requirements:

Minimum

Recommended

CPU

1GHz

1.2GHz

RAM

128MB

800MB

Available RAM

50MB or more

Network

3G, 4G(LTE), Wi-Fi

J 3G and 4G(LTE) networks may charge you with excessive fees and can cause a delay or loss. So we recommend you to use the Wi-Fi networks.

2

1. Adding a Device

To Add a Device

1. Move to the Add Device page.

A If visited with no added device for the first time, message appears.

Live Device List

Search

Bookmark

Settings iPOLiS mobile

B To add another device, touch the menu button on left bottom side to display Add icon < >.

Before you can view the image properly, you must configure the connection settings.

Add Device

2. Enter the device information to be

Add Device

added in the Add Device page.

Name

? Name : Name the device as desired.

Enter the device name. Model Select a model.

Host

If you don't enter, hostname of the

Enter the host name.

device is used by default.

HTTP Port 80

? Model : Select one from the product RTSP Port

type listed.

Enter RTSP port.

Actual model name is not required, it's

ID Input User ID.

automatically assigned after adding the

device.

Save

iPOLiS mobile Tip

Cancel

3

? Host : Enter the IP address or host name (registered with DDNS) of the external device according to your Internet connection environment.

? HTTP Port : Enter the connection port for the device. ? RTSP Port : Enter the RTSP port number configured for the

device. For DVR and HW NVR, enter the last port number of port range

configured for the device. For example, if the range is 4520~4524, enter 4524.

? ID : Enter the device ID that you have specified. ? Password : Enter the password for the device that you have

specified. Password setup of the device to be added is optional, there is no

need to enter the password. 3. Provide necessary information and touch button. 4. Select a profile.

User must select a profile for video recording if the device to be added is a network camera or an encoder. A profile's properties can be viewed and edited with Web Viewer, where iPOLiS mobile only provides selecting one that is optimal for the displaying device from existing profiles.

5. Select a channel.

For adding a DVR/NVR, user must select a channel for the connection. A channel's properties can be viewed and edited with Web Viewer, where iPOLiS mobile only provides selecting one to monitor, for the displaying device.

6. Once completed with connecting to the device, it is added to the device list.

M If settings of the added device are edited on the Web Viewer after adding it to your application, then iPOLiS mobile may fail to recognize changed device. In such cases, move to the editing page of the corresponding device and touch button to revive the connection again.

4

 Recommended Profile Information

It is recommended to set the profile as shown below for optimal Live video monitoring with iPOLiS mobile.

Configuration Device

N/W camera DVR

H/W NVR S/W NVR

Profile Setting

Setup

Video Setup

Network Setup

Live Transfer

Network Setup

Live Transfer

Video Setup

Live Streaming Video Source 2

Video Profile Setup

Codec

Resolution

MJPEG H.264

320X240 / CIF 320X240 / CIF

Frame Rate

5fps 10fps

Compression / Transmission

Quality

Normal (10)

Normal (10)

M Videos of more than 1.3M pixels are not supported.

For real-time monitoring, only key frames are provided.

According to the network stability, connection may suffer from stuttering or interruption.

5

 ................
................

In order to avoid copyright disputes, this page is only a partial summary.

Google Online Preview   Download