1 mixing valve domestic water
[DOCX File]Home | Infrastructure Planning and Facilities
https://info.5y1.org/1-mixing-valve-domestic-water_1_5d6777.html
This Section includes the following domestic water piping specialties: Vacuum breakers. Backflow preventers. Water pressure-reducing valves. Balancing valves. Temperature-actuated water mixing valves. Strainers. Hose bibbs. Wall hydrants. Water hammer arresters. Air vents. Trap-seal primer valves. Trap-seal primer systems. Flexible connectors ...
[DOCX File]Prefuctional Checklist - DeCA Facilities
https://info.5y1.org/1-mixing-valve-domestic-water_1_416e14.html
Confirm the Domestic Hot water tank setpoint is programmed to 140 Degrees F. and the Thermostatic 3-way mixing valve modulates to maintain the hot water supply temperature of 120 Degrees F Hot water tank maintains 140 degrees at all times.
Chapter 5.2
OGS encourages domestic hot water be stored at a minimum of 140 degrees F . with distribution at a minimum of 110 degrees F. Operation at these temperatures . is part of good design practice to limit the possibility of Legionella within the . domestic hot water system. 3. OGS. encourages scald protection by use of a master mixing valve of the ...
[DOCX File]Home | Holby Valve
https://info.5y1.org/1-mixing-valve-domestic-water_1_36f947.html
May 01, 2016 · Install thermostatic mixing/tempering valves as indicated on drawings and per valve manufacturer’s recommendations. The general arrangement shall be such that the tempered hot water recirculation pump discharge piping shall tie into the cold water branch feeding the domestic hot water …
[DOCX File]Section 22 05 23 - GENERAL-DUTY VALVES FOR PLUMBING …
https://info.5y1.org/1-mixing-valve-domestic-water_1_9a37d5.html
A.The backwater valve shall have a cast iron body, automatic thermoplastic type valve seat and flapper suited for water service. The flapper shall be slightly open during periods of nonoperation. The pressure reducing valve shall meet ASME A112.14.1. The cleanout shall be extended to the finish floor and fit with a threaded countersunk plug.
[DOC File]PRE-START CHECKLIST- AIR HANDLING SYSTEM – AHU-1
https://info.5y1.org/1-mixing-valve-domestic-water_1_9b0d36.html
FUNCTIONAL TEST – Domestic Water System. University of Michigan Plant Extension. Commissioning and Plan Review Department. Phone (734) 615-7168 Fax (734) 936-3334. ... ___Type of valve installed. Mixing Valve MV-1 ___Temperature setting at 110(F ___Hi flow and low flow installed. Domestic Hot Water Booster Package
[DOC File]SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES
https://info.5y1.org/1-mixing-valve-domestic-water_1_109a26.html
Preassembled Hi-Lo recirculating water station, thermostatic mixing valve, inlet/outlet pressure and temperature gauges, and circuit setter balancing valve mounted to steel strut frame. Inlets: 1-1…
[DOCX File]Section 22 05 23 - GENERAL-DUTY VALVES FOR PLUMBING …
https://info.5y1.org/1-mixing-valve-domestic-water_1_fc8d3f.html
The backwater valve shall have a cast iron body, automatic thermoplastic type valve seat and flapper suited for water service. The flapper shall be slightly open during periods of nonoperation. The pressure reducing valve shall meet ASME A112.14.1. The cleanout shall be extended to the finish floor and fit with a threaded countersunk plug.
[DOC File]SECTION 22 33 13 – INSTANTANEOUS ELECTRIC DOMESTIC …
https://info.5y1.org/1-mixing-valve-domestic-water_1_9a9c80.html
Section 22 11 19 - DOMESTIC WATER PIPING SPECIALTIES (Thermostatic mixing valves) Section 22 33 13 - INSTANTANEOUS ELECTRIC DOMESTIC WATER HEATERS (Keltech tankless water heaters) Section 22 42 16.11 - COMMERCIAL SINKS AND FAUCETS. Section 22 42 23 - COMMERCIAL SHOWERS AND SHOWER VALVES
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.