19 32 inch to inch
[DOC File]SECTION 061600 - SHEATHING
https://info.5y1.org/19-32-inch-to-inch_1_e14d09.html
Performance Categories have tolerance of plus or minus 0.8 mm (for metric basis) or 1/32-inch (for English basis) in accordance with PS 2-10. Actual thicknesses of 1/2 Performance Category and 5/8 Performance Category panels are 1/2-inch and 5/8-inch plus or minus 1/32-inch (0.8 mm), respectively.
[DOCX File]Ornamental Steel Fences and Gates - Steel Gates
https://info.5y1.org/19-32-inch-to-inch_1_2c3a4c.html
b.Latch: [3/4 inch] [19 mm] diameter slide bolt to accommodate padlock. c.For double gates provide padlockable, [5/8 inch] [16 mm] diameter center cane bolt assembly and strike. ***** Include the following paragraphs if hinged V-wheeled rolling gates are required.
[DOC File]SECTION 074646 - FIBER-CEMENT SIDING
https://info.5y1.org/19-32-inch-to-inch_1_fb0bcc.html
Fasteners: ASTM A153, hot-dip galvanized or stainless steel nails with 0.113 inch diameter shank and 0.27 inch diameter head, long enough to achieve 1 1-1/2 inch penetration into structural sheathing and framing . Sealant: ASTM C920, minimum Class 25 sealant. Weather Barrier [Building Wrap]: ASTM E1677; made from polyolefin fibers.
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/19-32-inch-to-inch_1_8674e4.html
Clearance: 3/4 inch (19 mm) plus 1/32 inch (0.8 mm) minus 0 inches per side. Finish: Zinc plated. Heavy Duty Drawer Slide: KV 8908 lock in/lock out, KV 8909 lock out, KV 8910 lock in; full extension, ball bearing; side mounted. Pound Class 180-500 based on applications. Full extension drawer slide. Height: 3 inches (76 mm).
SECTION 224000 - PLUMBING FIXTURES
Cabinet: [ANSI A112.19.4; porcelain-enameled steel] [ANSI Z124.2 reinforced glass fiber], [32 ¥ 32 ¥ 75] [ ¥ ¥ ]-inch high, with [stone-texture] receptor, soap dish, [integral seat,] removable chrome-plated strainer, tailpieces; [ ], [ ], or equal.
[DOCX File]SECTION 13 34 19 - METAL BUILDING SYSTEMS
https://info.5y1.org/19-32-inch-to-inch_1_4a4e91.html
SPEC WRITER NOTE: Minimum steel thickness for walls is 0.7 mm (0.0276 inch) (24 gage). Minimum steel thickness for roofs is 0.08 mm (0.0336 inch) (22 gage). Minimum aluminum thickness is 0.8 mm (0.032 inch). Check design requirements for heavier material.
[DOC File]Section 13 34 19 - Metal Building Systems
https://info.5y1.org/19-32-inch-to-inch_1_6e055b.html
2-1/2-Inch-Thick Panels: 19.38. 3-Inch-Thick Panels: 23.58. 4-Inch-Thick Panels: 30.86. Insulated Panels: Carry the following listings: Factory Mutual Class 1 Rating for wall and ceiling construction FM 4880. Guide NYWR, Insulated Wall Construction Subject 1040.
[DOC File]Section 07460 - Siding - Woodtone
https://info.5y1.org/19-32-inch-to-inch_1_c959c0.html
Thickness: 19/32 inch. Texture: Cedar. Length: Single lengths as applicable. Type: Shake Panel Wood Fiber Composite Siding: LP Cedar Shake as coated by Woodtone. ** NOTE TO SPECIFIER ** Delete pattern not required. Style: Shake siding; 12 inch wide. Style: _____. Style: As per sample. Style: As indicated on drawings. Thickness: 7/16 inch.
[DOCX File]ARCAT | Free Building Product CAD Details, BIM, Specs and …
https://info.5y1.org/19-32-inch-to-inch_1_a57e2c.html
Model 3/4 inch: Rod Diameter: 3/4 inch (19 mm) Thread Diameter: 3/4 inch (19 mm) or 16. Jaw Gap: 3/4 inch (19 mm). Jaw Depth: 1-7/32 inch (31 mm). Pin Diameter: 3/4 inch (19 mm). Total Adjustment: 5.5 inches (140 mm). ** NOTE TO SPECIFIER ** Delete material options not required. Material: Stainless steel, alloy 316.
[DOCX File]SECTION 32 31 19 - DECORATIVE METAL FENCES AND GATES
https://info.5y1.org/19-32-inch-to-inch_1_d6f9fb.html
Rails: Extruded aluminum, 44mm (1.75 inch) square, 2.5mm (0.100 inch) thick top, 3mm (0.120 inch) thick sidewalls, 2mm (0.080 inch) thick inner side channel, and holes at 118mm (4.715 inch) o.c. to receive picket; seal with PVC grommets.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.