Aluminum flat bar stock sizes
[DOCX File]SECTION 07 71 00 - ROOF SPECIALTIES
https://info.5y1.org/aluminum-flat-bar-stock-sizes_1_5d448f.html
Furnish in stock lengths of not more than 3.05 M (10 feet) long. Form fascia from not less than 2 mm (0.070 inch) thick aluminum. Provide 101 mm (4 inch) wide 0.81 mm (0.032-inch) thick concealed sheet aluminum joint cover plates in back of fascia.
[DOCX File]Ornamental Steel Fences and Gates - Aluminum Fence
https://info.5y1.org/aluminum-flat-bar-stock-sizes_1_2c3a4c.html
B.Extension arm posts: Provide posts with steel flat bar extensions, [11-3/4 by 2-3/8 by 5/16 inches] [298 by 60 by 8 mm], projecting 45 degrees, with 3 holes for attachment of barbed or electrified wires. C.Barbed wire: Two twisted strands of ASTM A121 galvanized 12.5 gage wire with 14 gage four point round barbs at 5 inches.
[DOC File]Sectional Metal Doors
https://info.5y1.org/aluminum-flat-bar-stock-sizes_1_eb474a.html
Flat bar door latch. Handles: operated from outside. Two horizontal sliding lock bolts on interior. Weatherstripping. Sills: double contact, full width extended neoprene weathertstrip. Jambs and head: extended aluminum and artic grade vinyl weatherstrip to manufacturer’s standard.
[DOCX File]Metal Sun Shades - Aluminum Fence | Aluminum Gates
https://info.5y1.org/aluminum-flat-bar-stock-sizes_1_c84aac.html
***** Various panel sizes can be fabricated. Size is determined by structural and wind loads, seismic conditions, and degree of shading required. Maximum panel length for bar grill sun shades is 10 feet (3048 mm) and for louver sun shades is 6 feet (1829 mm).
[DOC File]Sarnafil Adhered Guide Specification
https://info.5y1.org/aluminum-flat-bar-stock-sizes_1_1c5cba.html
An extruded aluminum, low profile bar used with certain Sarnafasteners to attach to the roof deck or to walls/curbs at terminations, penetrations and at incline changes of the substrate. Sarnastop is a 1 inch (25 mm) wide, flat aluminum bar 1/8 inch (3 mm) thick that has predrilled holes every 6 …
SECTION 220719 - PLUMBING PIPING INSULATION
Aluminum Jacket: Aluminum roll stock, ready for shop or field cutting and forming to indicated sizes. Comply with ASTM B 209 (ASTM B 209M), 3003 alloy, H-14 temper. Finish and Thickness: Smooth finish, 0.010 (0.25 mm) inch thick. Moisture Barrier: 1-mil thick, heat-bonded polyethylene and kraft paper.
Nearby & related entries:
To fulfill the demand for quickly locating and searching documents.
It is intelligent file search solution for home and business.